Design Improvement of ‘Air Remover Fan’ to Reduce Temperature Inside the Car


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


The Air Remover Fan is a device that base on process of solving a temperature problem inside a car during parked under the direct sunlight or open area for a long period. When a car is parked for certain period in this condition, the temperature inside the car cabin will be high from the ambient temperature. Sometimes the temperature inside the car will be double from the ambient temperature. To solve this problem, the Air Remover Fan is introducing as a device to reduce the hot temperature air inside the car [16][17]. The device is operate by using the temperature sensor which is it automatically operates when the sensor detect the 33°C temperature and the system will allow the fan to suck the hot air inside the car cabin to the outside through the car boot. The improvement of product will be focusing in designing the fan blade which is to choose the best selection of fan blade design, find the correct angle of the fan and fan casing which is to get the best design for ‘Air Remover Fan.
Copyright © 2013 Praise Worthy Prize - All rights reserved.

Keywords


Air Remover Fan; Automatic Solar-Powered Car Ventilator

Full Text:

PDF


References


R.S Bridger. (2009). Introduction to Ergonomics. 3rd Edition, CRC Press, Taylor & Francis Group.

Frank P. Incropera, David P. Dewitt, Theodore L. Bergman and Adrienne S. Lavine. (2005). Introduction to Heat Transfer. 5th Edition, John Wiley & Sons, Inc. USA.

Frank P.Bleier. (1998). Fan Handbook: Selection, Application, and Design. McGraw-Hill, Inc.

Mikell P.Groover. (2007). Fundamentals of Modern Manufacturing. 3rd Edition, John Wiley & Sons, Inc. USA.

Yunus A. Cengel and Michael A. Boles. (2006). Thermodynamics. 5th Edition,McGraw-Hill,Inc.

A.Mezrhab and M.Bouzidi. (2006). Applied Thermal Engineering. 1st Edition, Computation of thermal comfort inside a passenger car compartment, 26(14-15), pp.1697-1704.

Zailani, Z.A., Hamidon, R., Hussin, M.S., Hamzas, M.F.M.A., Hadi, H., Classroom comfort ability assessment: A case study, (2012), International Review of Mechanical Engineering (IREME), 6 (3), pp. 339-345.

M.S Hussin, M.F.M.A Hamzas, Hasnul Hadi, Z.A Zailani, A.B.Sanuddin, Design and Fabrication of a Die for Molding Test Press, (2012) International Review of Mechanical Engineering (IREME), 6 (6), pp. 1257-1261.

Khairul Rizal, (2010), Cool Solar Powered Car Ventilation, http://www.lelong.com.my auto-cooling-fan-cool-solar-powered-car-ventilation- 66472773-2010-08-Sale.htm, 22 August 2010.

Hartzell Fan Inc., (1991), Industry Information: Exhaust Fan, http://www.iqsdirectory/exhaust-fans 1.htm, 7 October 2010.

Wikipedia, (2011), Automotive Battery, http://en.wikipedia.org/wiki/Automotive_battery.htm, 11 October 2010.

The NEED Project, (2008), What is Solar Energy, www.NEED.org/needpdf/infobook_activities/SecInfo/SolarS.htm, 4 October 2010.

Yuasa Batteries, (2009), Technical Manual Revision 08/09, http://www.yuasabatteries.com/pdfs/TechManual_2009.htm, 11 October 2010.

R.S Bridger. (2009). Introduction to Ergonomics. 3rd Edition, CRC Press, Taylor & Francis Group.

Malaysian Metrological Department, (2009), General Climate of Malaysia, www.met.gov.my/MOSTI/index.php.htm, 12 October 2010.

Berita Semasa, (2010), Tahun 2009 Statistik Jualan Kereta di Malaysia, http:// beritasemasa.com/tahun-2009-senarai-jualan-model-kereta-di-malaysia.htm, 7 October 2010.

Perodua, (2010), Myvi Specification, http://www.perodua.com.my/index.php?section=ourcars&page=myvi.htm, 7 October 2010.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize