Email this article 
Two-Phase Flow in Micro-Channel Heat Sink Review Paper
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
The micro channel heat sink (MCHS) is the most widely used heat sink. It is continuously studied by different researchers and companies who improve the effectiveness and efficiency with which it removes heat from devices. This review paper focuses on two-phase flow in MCHS and includes the mathematical and numerical analysis of the two-phase flow in MCHS. It also provides an overview of the types of MCHS with respect to the arrangement of the fins. These types include rectangular, circular, and other types of MCHS. It includes some applications in which the MCHS is preferably used. In addition to these applications of the MCHS, this review paper includes a brief explanation of the fluids used in the MCHS to increase its effectiveness.
Copyright © 2013 Praise Worthy Prize - All rights reserved.
Keywords
References
Whan Na, Y. and J.N. Chung, Two-phase annular flow and evaporative heat transfer in a microchannel. International Journal of Heat and Fluid Flow, 2011. 32(2): p. 440-450.
Sung, M.K., Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module. International Journal of Heat and Mass Transfer, 2008(51(15-16)): p. 3882-3895.
Fukagata, K., et al., Numerical simulation of gas–liquid two-phase flow and convective heat transfer in a micro tube. International Journal of Heat and Fluid Flow, 2007. 28(1): p. 72-82.
Wang, Y. and K. Sefiane, Effects of heat flux, vapour quality, channel hydraulic diameter on flow boiling heat transfer in variable aspect ratio micro-channels using transparent heating. International Journal of Heat and Mass Transfer, 2012. 55(9-10): p. 2235-2243.
Steinke, M.E. and S.G. Kandlikar, Control and effect of dissolved air in water during flow boiling in microchannels. International Journal of Heat and Mass Transfer, 2004. 47(8–9): p. 1925-1935.
Zhang, W., et al., Correlation of critical heat flux for flow boiling of water in mini-channels. International Journal of Heat and Mass Transfer, 2006. 49(5-6): p. 1058-1072.
Shalchi-Tabrizi, A. and H.R. Seyf, Analysis of entropy generation and convective heat transfer of Al2O3 nanofluid flow in a tangential micro heat sink. International Journal of Heat and Mass Transfer, 2012. 55(15-16): p. 4366-4375.
Mehendale, S.S., A.M. Jacobi, and R.K. Shah, Fluid Flow and Heat Transfer at Micro- and Meso-Scales With Application to Heat Exchanger Design. Applied Mechanics Reviews, 2000. 53(7): p. 175-193.
Kim, S.-M. and I. Mudawar, Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows. International Journal of Heat and Mass Transfer, 2012. 55(11-12): p. 3246-3261.
Qu, W. and I. Mudawar, Measurement and prediction of pressure drop in two-phase micro-channel heat sinks. International Journal of Heat and Mass Transfer, 2003. 46(15): p. 2737-2753.
Shkarah, A.J., D.M.Y. Sulaiman, and P.M.R. Ayob, Numerical analysis of two phase flow heat transfer in rectangular micro channel heat sink. Archives Des Sciences, 2012. 65(7): p. 602-613.
Klein, D., G. Hetsroni, and A. Mosyak, Heat transfer characteristics of water and APG surfactant solution in a micro-channel heat sink. International Journal of Multiphase Flow, 2005. 31(4): p. 393-415.
Saenen, T. and M. Baelmans, Numerical model of a two-phase microchannel heat sink electronics cooling system. International Journal of Thermal Sciences, 2012. 59: p. 214-223.
Mishan, Y., et al., Effect of developing flow and thermal regime on momentum and heat transfer in micro-scale heat sink. International Journal of Heat and Mass Transfer, 2007. 50(15-16): p. 3100-3114.
Reyes, M., et al., Experimental study of heat transfer and pressure drop in micro-channel based heat sinks with tip clearance. Applied Thermal Engineering, 2011. 31(5): p. 887-893.
Megahed, A., Experimental investigation of flow boiling characteristics in a cross-linked microchannel heat sink. International Journal of Multiphase Flow, 2011. 37(4): p. 380-393.
Lee, J. and I. Mudawar, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I––pressure drop characteristics. International Journal of Heat and Mass Transfer, 2005. 48(5): p. 928-940.
Mansoor, M.M., K.-C. Wong, and M. Siddique, Numerical investigation of fluid flow and heat transfer under high heat flux using rectangular micro-channels. International Communications in Heat and Mass Transfer, 2012. 39(2): p. 291-297.
Kim, S.-M. and I. Mudawar, Analytical heat diffusion models for heat sinks with circular micro-channels. International Journal of Heat and Mass Transfer, 2010. 53(21-22): p. 4552-4566.
Dasgupta, E.S., F.A. Siddiqui, and A. Fartaj, Experimental Study on Air Side Heat Transfer and Fluid Flow Characteristics of Microchannel Heat Exchanger. SAE International Journal of Materials & Manufacturing, 2011. 4(1): p. 1198-1210.
Lee, J. and I. Mudawar, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics. International Journal of Heat and Mass Transfer, 2005. 48(5): p. 941-955.
Jang, Y., et al., Flow boiling heat transfer coefficients and pressure drops of FC-72 in small channel heat sinks. International Journal of Refrigeration, 2008. 31(6): p. 1033-1041.
Cheng, L. and D. Mewes, Review of two-phase flow and flow boiling of mixtures in small and mini channels. International Journal of Multiphase Flow, 2006. 32(2): p. 183-207.
Lee, J. and I. Mudawar, Critical heat flux for subcooled flow boiling in micro-channel heat sinks. International Journal of Heat and Mass Transfer, 2009. 52(13-14): p. 3341-3352.
Hetsroni, G., et al., Explosive boiling of water in parallel micro-channels. International Journal of Multiphase Flow, 2005. 31(4): p. 371-392.
Sung, M.K. and I. Mudawar, Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module. International Journal of Heat and Mass Transfer, 2008. 51(15-16): p. 3882-3895.
Krishnamurthy, S., Flow boiling of water in a circular staggered micro-pin fin heat sink. International Journal of Heat and Mass Transfer, 2008(51(5-6): p. 1349-1364.
Kim, S.-M. and I. Mudawar, Flow condensation in parallel micro-channels – Part 2: Heat transfer results and correlation technique. International Journal of Heat and Mass Transfer, 2012. 55(4): p. 984-994.
Al-Rjoub, M.F., et al., Assessment of an active-cooling micro-channel heat sink device, using electro-osmotic flow. International Journal of Heat and Mass Transfer, 2011. 54(21-22): p. 4560-4569.
Bello-Ochende, T., L. Liebenberg, and J.P. Meyer, Constructal cooling channels for micro-channel heat sinks. International Journal of Heat and Mass Transfer, 2007. 50(21-22): p. 4141-4150.
Bogojevic, D., et al., Two-phase flow instabilities in a silicon microchannels heat sink. International Journal of Heat and Fluid Flow, 2009. 30(5): p. 854-867.
Megahed, A., Local flow boiling heat transfer characteristics in silicon microchannel heat sinks using liquid crystal thermography. International Journal of Multiphase Flow, 2012. 39: p. 55-65.
Liu, M., et al., Experimental study on liquid flow and heat transfer in micro square pin fin heat sink. International Journal of Heat and Mass Transfer, 2011. 54(25-26): p. 5602-5611.
Lee, J. and I. Mudawar, Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 2. Subcooled boiling pressure drop and heat transfer. International Journal of Heat and Mass Transfer, 2008. 51(17-18): p. 4327-4341.
Lee, J. and I. Mudawar, Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 1: Experimental methods and flow visualization results. International Journal of Heat and Mass Transfer, 2008. 51(17-18): p. 4315-4326.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
