A Review on Thermal Behavior Aspects of Nickel-Tungsten Alloy Coating


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


The recent developments in aerospace, missiles, rockets, automobile engines necessitate the development of thermal barrier coating to protect the costly, precious base structural components from the heat load. Because of the intermediate heat loads, the base materials explode due to high temperature corrosion, alterations in grains etc. Hence, it becomes a major concern to provide a thermal barrier coating which has the property of being easily applied, economical cost and durable life to protect the base materials. This review paper provides a detailed survey on the nickel - tungsten alloy coating by various processes viz electro-deposition, plasma spray, coating behavioural aspects, its mechanical properties, thermal properties and surface topography.
Copyright © 2013 Praise Worthy Prize - All rights reserved.

Keywords


Nickel Tungsten Alloy Coating; Thermal Barrier; Electro Deposition; Heat Load

Full Text:

PDF


References


V.V. Medvedev, B.V. Mochalov, Yu.B. Sazonov, L.G. Chernukha, I.P. Ezhov, Properties of high temperature alloys in short term service conditions, Material Science and Heat treatment, Vol. 41, No 4, pp. 151-153, 1999.

J.C. Miranda, A. Ramalho, Abrasion resistance of thermal sprayed composite coatings with a nickel alloy matrix and a WC hard phase effect of deposition technique and re- melting, Tribology Letters, Vol. 11, No. 1, pp. 37-48, 2001.

A.R. Jones, J. Hamman, A.C. Lund, C.A. Schuh, Nanocyrtalline Ni-W alloy coating for engineering application, Plating and Surface Engineering, A Technical Article, pp. 52-60, May 2010.

J.A. Hayner, Y. Zhang, K.M. Cooley, L. Walker, K.S. Reeves, B.A. Pint, “High-temperature diffusion barrier for protective coatings”, Surface & coating Technology, Vol. 188, pp.153-157, 2004.

Marielle wouters, Eric Creenmehar, Karin Tempelaass, Harmut Fisher, Niki Stroker, Joyce Van Zanten, Preparation and properties of novel emendable coating concepts, Process in Organic coatings, pp. 156-162, 2009.

M.Lindenmo, A.Coombs, D.Snell, Advantages, properties and types of coating on non-oriented electrical steels , Journal of Magnetism and Magnetic Materials, Vol. 215, pp. 79-82, 2000.

Y.C.Zhou. T.Tonomori, A.Yoshida, L.Liu, C.Bignall, T.Hashida, Fracture Characteristics of thermal barrier coatings after tensile and bending tests, Surface & coating Technology, Vol. 157, pp. 118-127, 2002.

M.Schutze, M.Malessa, V.Rohr, T.Weber, Development of coating for protection in specific high temperature environments, Surface & coating Technology, Vol. 01, pp. 3872-3879, 2006.

Huibin Xu, Hongbo Guo, Fushun Liu, Shengkai Gong, Development of gradient thermal barrier coating and their hot-fatigue behaviour, Surface & Coating Technology, Vol. 130, pp.133-139, 2000.

Per Carlsson, Ulf Bexell, Mikael Oission, “Triboligical behaviour of thin organic permanent coating deposited on hot-dip coated steel sheet-A laboratory study, Surface & Coating Technology, Vol. 132, pp.169-180, 2000.

A.M.Rashidi, A.Amadeh, Effect of Electroplating parameters on Microstructure of Nano-Crystalline Nickel Coating”, Journal of Material Science Technology, Vol. 26, No. 1, pp. 82-86, 2010.

Z.Galikova, M.Chovancova, V.Danielik., Properties of Ni alloy coating on steel substrate, Chemistry Papers ,Vol. 60, pp. 353-359, 2006.

Maria Poroch- Seritan, Sonia Gutt, Ghearghr Gutt, Igor Cretesccu, Corneliu Cojo Caru, Traian Severin, Design of experiments for statistical modelling and multi-response optimization of Nickel electroplating process, Chemical Engineering Research and Design, Vol. 8, No.9, pp. 136-147, 2011.

C.M.Chun, G.Bhargava, T.A.Ramanarayanan, “Metal dusting corrosion of nickel based alloys”, Journal of the Electrochemical Society, Vol. 154, No. 5, pp. 231-240, 2007.

Louis.J.Ghosn, Dongming Zhu, Thermal barrier and protective coating to improve the durability of a combustor under a pulse detonation engine environment, NASA Technical Reports, NASA/T,M-2008-214915, 2008.

X.C. Zhang , B.S. Xu, S.T. Tu , F.Z. Xuan, H.D. Wang, Y.X. Wu, “Effect of spraying power on the microstructure and mechanical properties of supersonic plasma-sprayed Ni-based alloy coatings, Applied Surface Science , Vol. 254, pp. 6318–6326, 2008.

S.C. Wu .H.O. Zhang , Q. Tangb, L. Chenb, G.L. Wangd “Meshless analysis of the substrate temperature in plasma spraying process”, International Journal of Thermal Sciences, Vol. 48, pp. 674–681, 2009.

William D. Sproul, “Physical vapor deposition tool coatings”, Surface and Coatings Technology, Vol. 8l, pp. l-7, l996.

B. Navinsek , P. Panjan, I. Milosev , “PVD coatings as an environmentally clean alternative to electroplating and electrolyses processes”, Surface and Coatings Technology, Vol. 116–119, pp. 476–487, 1999.

Takashi Goto, “High-speed deposition of zirconia films by laser-induced plasma CVD”, Solid State Ionics, Vol. 172, pp. 225-229, 1994.

Heejin Lee, Min Young Song, Jongsoo Jurng, Young-Kwon Park, “The synthesis and coating process of TiO2 Nano-particles using CVD process”, Powder Technology, Vol. 214, pp. 64–68, 2011.

Tohru Yamasaki, “High strength nano-crystalline Ni-W alloys produced by Electro-deposition”, Mater. phys. Mech, Vol. 1, pp.127-132, 2000.

D.M.Allen, N.Duclos, I.Garbutt, M.Saumer, Ch.Dhum, M.Schmitt, J.E.Hoffmann, “The effects of additives on the physical properties of electroformed nickel and on the stretch of photo-electroformed nickel components”, DITP, 2006.

Chein-Ho-Huang, “Effect of imides on Ni-W alloy forming”, Journal of Material Science, Vol. 34, pp. 1373-1377, 1999.

A.S.M.A.Haseeb, K.Bade, “LIGA fabrication of nanocrystalline Ni-W alloy micro specimens from ammonia Citrate bath”, Microsyst Technol, Vol. 14, pp. 379-388, 2008.

S.Kabi, K.Raseissi, A.Saatchi, “Effect of polarization type on properties of Ni-W nanocrystallites Electrodeposits”, Journal of Applications of Electrochemistry, Vol. 39, pp. 1279-1285, 2009.

S.Franz, A.Marlot, P.L.Cavallotti , D.Landolt , “ Pulse plating of Ni W alloy films from model electrodes”, Transactions of the Institute of metal finishing, Vol. 86, No 2, pp. 92-97, 2008.

M.S.Chandrasekar, Malathy Pushpavanam, “Pulse and pulse reverse plating – conceptual, advantages and applications”, Electrochimica Acta, Vol. 53, pp. 3313-3322, 2008.

Aygun, Patric Daniels, Willam Borland, Jon-Paul Maria, “Hot sputtering of barium strontium titanate on Ni foils”, Journal of Applied Physics, Vol. 103, No. 8, pp. 084123, 2008.

N.Eliaz, T.M.Sridhar, E.Gileadi, “Synthesis and characterization of Ni-W alloy by electro deposition”, Electrochimica Acta, Vol.50, pp. 2893-2904, 2005.

A.S.M.A. Haseeb, U.Albers, K.Bade, “Friction and Wear characteristics of electrodeposited nano-crystalline Ni-W alloy films”, Wear, Vol. 264, Issue1-2, pp.106-112, 2008.

R.Juskenas, I.Valsiunas, V.Pakstas, R.Giraitis, “On the state of W in electro-deposited Ni-W alloys”, Electrochimica Acta, Vol. 54, No. 9, pp. 2616-2620, 2009.

G.A.Dosovitskiy, S.V.Samoilenkou, A.R.Kaul , D.P.Radionov, “Thermal expansion of Ni-W, Ni-Cr, Ni-Cr-W alloys between room temperature and 8000C”, Int. Journal of Thermophysics, Vol. 30, No. 6, pp. 1931-1937, 2009.

I.G.Kampalova, Yu.P.Perelygin, T.S.Semchenko, “Electro deposition of Ni-W alloy from acetate electrolyte”, Russian Journal of Applied chem., Vol. 76, No. 9 pp.1524-1526, 2003.

V.L.Kotov, M.V.Shmuker, “Electroplating kinetics of Ni-W alloys”, Protection of metals, Vol. 42, No 2: pp. 153-157, 2006.

O.Younes, E.Gileadi, “Electroplating of Ni-W alloys I.Ammonical Citrate Baths”, Journal of Electrochemical society, Vol. 149, No. 2, pp. 100-111, 2002.

O.Younes , E.Gileadi, “Electroplating of high tungsten content Ni-W alloy”, Electrochemical and solid state letters, Vol. 3, No. 12, p 543-545, 2000.

T.M.Sridhar, N.Eliaz, E.Gileadi, “Electroplating of Ni4 –W”, Electrochemical and solid state letters, Vol. 8, No. 3, pp. 58-61, 2000.

Anna Gajewska-Midzialek, Benigna Szeptycka, Daniela Derewnicka, AleksanderNakonieczny, “Wear resistance of nanocrystalline composite Ni-B coatings”, Tribology International, Vol. 39, pp.763-768, 2006.

Chein-Ho-Huang, “A study of the effects of diammonium Citrate on electroperformed nickel- tungsten alloy”, Plating & Surface Finishing, Vol 84, No. 4, pp. 62-65, 1997.

H.Cesiulis, A.Baltukiene, M.Donten, M.L. .Donten, “Increase in rate of electrodeposition and in Ni(II) concentration in the bath as a way to control grain size of amorphous/ nanocrystalline Ni-W alloys”, Journal of .Solid State Electrochemistry, Vol. 6, No.4, pp.237-244, 2002.

R.M. Krishnan, C. Joseph Kennedy, Sobha Jayakrishnan,S. Sriveeraraghavan, and S.R. Natarajan, P.G. Venkatakrishnan, “Electrodeposition of Nickel-Tungsten Alloys”, Metal finishing (USA), Vol. 93, No. 7, pp. 33-39, 1995.

G.T.J.Arnison, “The production of thin self supporting foils using an electroplating method”, Nuclear Instruments and methods, Vol. 53, pp. 357-358, 1967.

W.E J.Neal , Alia. H.Musa, “Observations on block nickel foils selective surfaces”, Surface technology, Vol. 14, pp. 346-352, 1981.

Sriraman, KR and Ganesh Sundara Raman, S. and Seshadri, S.K., “Corrosion behaviour of electrodeposited nanocrystalline Ni--W and Ni--Fe--W alloys”, Materials Science and Engineering: A, Vol. 460, pp. 39-45, 2007.

E.Salavcheva, W.Mokwa, U.Schnakenberg,“ Electrodeposition and properties of Ni-W films for MEMS application”, Electrochimica Acta, Vol. 50, pp. 5573-5580, 2005.

Tohru Yamasaki, “High strength nanocrystalline Ni-W alloys produced by electro-deposition and their embrittlement behaviours during grain growth”, Scripta mater, Vol. 44, pp. 1497-1502, 2001.

Natsuko Odaa, Takako Okadaa, Masako Sonobe, Tohru Yamasaki , Takeshi Fukami, “Formation of high-strength nano-micro duplex structures in electrodeposited Ni-based alloys”, Journal of Alloys and Compounds, Vol. 434-435, pp. 283-285, 2007.

Kung-Hsu Hou, Yun- FengChang, Sha-Ming Chang, Chia–HuaChang, “The heat treatment effect on the structure and mechanical properties of electrodeposited nano grain size Ni-W alloy coatings”, Thin Solid Films, Vol. 518, pp. 7535-7540, 2010.

M.G.Hosseini, M.Abolmaleki, S.A.Sayed Sadjadi, M.Raghibi Boroujeni, M.R.Arshadi, H.Khoshvaght, “Electrodeposition of Ni-W-B nanocomposite from tartate electrolyte as alternative to chromium plating”, Surface Engineering, Vol. 25, No. 5, pp. 382-388, 2009.

R.A.C.Santana, S.Prasad, A.R.N.Campos, F.O.Araujo,G.P.Da Silva, P.De.Lima-Neta, “Electrodeposition and corrosion behaviour of a Ni-W-B amorphous alloy”, Journal of Review in Applied Electrochemistry, Vol. 36, No. 63, pp. 957-972, 2006.

L.Zhu, Q.Zhong, J.Liu, “Study of corrosion resistance of Ni-W-B amorphous alloy deposits”, Plating & Surface Finishing, Vol. 87, No. 10, pp. 74-77, May 2000.

R.C.Agarwala, Vijaya Agarwala, “Electrolyses alloy/ composite coatings: A Review”, Sadhana, Vol. 28, No. 3&4, pp. 475-493, 2003.

Honqili, Feng Jiang, Song Ni, Li Li, Gang Sha, Xiaozhou Liao, Simon P.Ringer, Hahn Choo, Peter K. Liawb, Amit misra, “Mechanical behaviors of as-deposited and annealed nanostructured Ni–Fe alloys” , Scripta Materialia Vol. 65, pp. 1-4, 2011.

Ting Liu,ZhanchenGuo, Zhi Wang and Mingyong Wang., “Structure and corrosion resistance of Ni foils deposited in a vertical gravity field”, Applied surface science, Vol. 256, pp. 6634-6640. 2010.

S.Perusin, B.Viguier, J.C.Salabura, D.Oquab, E.Andrieu, “Behaviour of the oxide scale during SEM in situ plastic deformation of pure nickel foil”, Material science and engineering, A387-389, pp. 763-767, 2004.

C.Rau, V.Crecea, C.P.Richter, K.M.Peterson, P.R.Jemian, U.Neuhausler, G.schneider, XYu, P.V.braun, T.C.Chiang, I.K.Robinson, “Imaging of micro and nano structure with hard–rays”, Micro and nanoletters, Vol. 2,No. 1,pp. 1-5, 2007.

A.cziraki, B.Fogarassy, I.Gerocs, “Microstructure and growth of electrodeposited nanocrystalline nickel foils”, Journals of material science, Vol. 29, pp.4771, 1994.

D. Stoever, C. Funke, “Directions of the development of thermal barrier coatings in energy applications”, Journal of Materials Processing Technology, Vol. 92-93, pp.195-202, 1999.

Fang Qing , Cheng Yan, Jian Xuyu , Zhu Lei, YU Haijun, Wang Zhong, Jiang Lijun, “Effects of flaky rare earth oxide additives on the high temperature performance of nickel electrodes”, Journal of rare earths, Vol. 28, No. 1, pp. 72, 2010.

Shih-Kang Tiena, Jenq-Gong Duh A, and Yung-I Chenb, “Structure, Thermal Stability and Mechanical Properties of Electroless Ni–P–W Alloy Coatings During Cycle Test”, Surface and Coatings Technology, Vol. 177-178, No. 30, pp. 532-536, January 2004.

K. Kanlayasiri, B.K. Paul, “A nickel aluminide microchannel array heat exchanger for high-temperature applications” Journal of Manufacturing Processes ,Vol. 6, No. 1, pp. 72-80, 2004.

Arturas Babilius, “Influence of temperature on Tungsten Carbide coating sprayed by different spray systems”, Material science, Vol. 11, No. 2, pp.105-109, 2005.

M.J. Pomeroy, “Coatings for gas turbine materials and long term stability issues”, Materials and Design, Vol. 26, pp. 223-231, 2005.

Wenchao Wang, “Application of a high temperature self-lubricating composite coating on steam turbine components”, Surface and Coatings Technology, Vol. 177-178, pp. 12–17, 2004.

Poh Koon Aw, Annie Lai Kuan Tan, Tai Phong Tan b, Jianhai Qiu, “Corrosion resistance of tungsten carbide based cermet coatings deposited by High Velocity Oxy-Fuel spray process”, Thin Solid Films, Vol. 516, pp. 5710–5715, 2008.

G.W. Goward, “Progress in coatings for gas turbine airfoils”, Surface and Coatings Technology, Vol. 108–109, pp. 73–79, 1998.

A.Cambe, E.Gauthier, J.M.Layet, S.Bentivegna, “Development of tungsten coating for fusion applications”, Fusion Engineering and Design, Vol. 56–57, pp.331–336, 2001.

V. Higuera Hidalgo, F.J. Belzunce Varela, A. Carriles Menendez, S. Poveda Martinez, “A comparative study of high-temperature erosion wear of plasma sprayed NiCrBSiFe and WC–NiCrBSiFe coatings under simulated coal-fired boiler conditions”, Tribology International, Vol. 34, pp.161–169, 2001.

K. Tokunaga, Y. Kubota, N. Noda, Y. Imamura, A. Kurumada, N. Yoshida, T. Sogabe, T. Kato, B. Schedler, “Behavior of actively cooled mock-ups with plasma sprayed tungsten coating under high heat flux conditions”, Fusion Engineering and Design, Vol. 81 , pp.133–138, 2006.

B. Vamsi Krishna, V.N. Misra, P.S. Mukherjee, Puneet Sharma, “Microstructure and properties of flame sprayed tungsten carbide coatings”, International Journal of Refractory Metals & Hard Materials , Vol. 20, pp. 355–374, 2002.

Marcelino P. Nascimento, Renato C. Souza, Ivancy M. Miguel, Walter L.Pigatin, Herman J.C. Voorwald, “Effects of tungsten carbide thermal spray coating by HP_HVOF and hard chromium electroplating on AISI 4340 high strength steel”, Surface and Coatings Technology, Vol. 138 , pp.113-124, 2001.

Yaran Niu, Deyang Hu, Heng Ji, Liping Huang, Xuebin Zheng, “Effect of bond coatings on properties of vacuum plasma sprayed tungsten coatings on copper alloy substrate”, Fusion Engineering and Design , Vol. 86, pp. 307–311, 2011.

E. Lugscheider, O. Knotek, K. Bobzin, S. Barwulf, “Tribological properties, phase generation and high temperature phase stability of tungsten- and vanadium-oxides deposited by reactive MSIP-PVD process for innovative lubrication applications”, Surface and Coatings Technology, Vol. 133-134, pp. 362-368, 2000.

J.P.Tu, M.S.Liu, Z.Y.Mao, “Erosion resistance of Ni-W C self-fluxing alloy coating at high temperature”, Wear, Vol. 209, pp.43-48, 1997.

Yaran Niu, Xuebin Zheng, Heng Ji, Lingjun Qi, Chuanxian Ding,Junling Chen, Guangnan Luo, “Microstructure and thermal property of tungsten coatings prepared by vacuum plasma spraying technology”, Fusion Engineering and Design, Vol. 85, pp.1521–1526, 2010.

Jiri Matejicek, Yoshie Koza, Vladimir Weinzettl, “Plasma sprayed tungsten-based coatings and their performance under fusion relevant conditions”, Fusion Engineering and Design, Vol. 75–79, pp. 395–399, 2005.

A.Zoikis-Karanthanais, E.A.Davlatou, N.Spyrellis, “ The effect of heat treatment on the structure and hardness of pulse electrodeposited NiP-WC composite coating”, Electrochimica Acta, Vol. 54, pp. 2563-2570, 2009.

M.Pushpavanam, S.R.Natarajan, K.BalaKrishnan, “Properties of Ni-WC electrocomposites”, Plating & surface Finishing, Vol. 84, No. 6, pp. 88-91, June 1997.

Kobayashi Akira, Puric Jagos, “Microstructure and hardness of tungsten coating for high hest resistant material produced by means of gas tunnel type plasma spraying”, Transactions of JWRI, Vol. 38, No. 1, pp. 57-62, 2009.

David R Clarke, Simon R. Phillpot, “Thermal barrier coating materials”, Materials Today, Vol. 8, No. 6, pp. 22-29, 2005.

Yang Tan, Jon P.Longtin, Sanjay sampth, Dongming Zhu “Temperature gradient effects in thermal barrier coatings: An investigation through modelling, High heat flux tests, and Embedded Sensor”, J. Am. Ceram. Soc, Vol. 93, No. 10, pp. 3418-3426, 2010.

Eiichi Sakuma, Kenneth M.Evenson, “Protection of materials by advanced high temperature coatings”, Journal De Physique 1V, Vol. 15, pp. 17-41, Dec. 1993.

Jana schloesser, Tatiana Fedorova, Martin Baker,Joachim Rosler, “Thermal barrier coatings on Copper substrates for rocket applications” , Journal of Solid Mechanics & materials Engineering, Vol. 4, No. 2, pp. 189-195, 2010.

Zhihong Zhong, Hun-chea Jung, Tatsuya Hinoki,Akira Kohyana, “Effect of joining temperature on the microstructure and strength of tungsten/ferrite steel joints diffusion bonded with a nickel interlayer”, Journal of Material Processing Technology, Vol. 210, Issue 13, pp. 1805-1810, 2010.

V.M.Azhazha, A.N.Ladygin, V.Ja.Sverdlov, P.D.Zhemanyuk, V.V.klochikhin, “Morphological transition in the cellular structure of single crystals of Ni-W alloys near the congruent melting point”, Crystallography reports, Vol. 50, Supplement 1, pp. 5130-5135, 2005.

N.Sulitanu, F.brinza, “Structure properties relationships in electrodeposited Ni-W thin films with columnar nanocrystallites, Journal of Optoelectronics and advanced materials, Vol. 5, No. 2, pp 421-427, 2003.

Sunil Badwe, K.S.Raja, M.Misra, “A study of corrosion behaviour of Ni-22Cr-13Mo-3W alloy under hygroscopic salt deposits on hot surface”, Electrochimica Acta, Vol. 51, pp. 5836-5844, 2006.

D.S.Dunn, Y.M.Pan, K.T.Chiang, I.Yang, G.A.Cragnolino, X.He, “The localized corrosion resistance and mechanical properties of alloy 22 waste package outer containers”, JOM Journal of the Minerals, Metals and Materials Society, Vol. 57, No. 1, pp. 49-55, 2005.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize