Email this article 
Active Vibration Control of Smart Composite Shells
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
This paper addresses the active control of mechanical vibrations induced in laminated composite doubly curved shells. A three dimensional energy based finite element model has been developed for this analysis. The laminated shell is integrated with a patch of active constrained layer damping (ACLD) treatment in which vertically reinforced 1-3 piezoelectric composite is used as the material of the constraining layer. Both in-plane and out-of-plane actuations of the constraining layer of the ACLD treatment have been utilized for deriving the finite element model. Investigation has been carried out to see the performance of the patch when the orientation angle of the piezoelectric fibers of the constraining layer is varied in the two mutually orthogonal vertical planes. The analysis revealed that the vertically reinforced 1-3 piezoelectric composites which are in general being used for the distributed sensors can be potentially used for the distributed actuators of high performance light-weight smart composite shells.
Copyright © 2013 Praise Worthy Prize - All rights reserved.
Keywords
References
Bailey, T. and Hubbard, J.E., 1985. Distributed piezoelectric polymer active vibration control of a cantilever beam, Journal of Guidance, Control and dynamics, Vol. 8, pp. 605–611.
Baz, A. and Poh, S., 1988. Performance of an active control system with piezoelectric actuators, Journal of Sound and Vibration, Vol. 126, pp. 327–343.
Hanagud, S., Obal, M.W. and Calise, A.J., 1992. Optimal vibration control by the use of piezoceramic sensors and actuators, Journal of Guidance, Control and dynamics, Vol. 15, No.5, pp. 1199–1206.
Ghosh, K. and Batra, R.C.,1995. Shape control of plates using piezoceramic elements, AIAA Journal, Vol. 33, No. 7, pp. 1354–1357.
Kim, J., Varadan, V.V., Varadan, V.K. and Bao, X.Q., 1996. Finite element modeling of a smart cantilever plate and comparison with experiments, Smart Materials and Structures, Vol. 5, No. 2, pp.165–170.
Lim, Y.H., Gopinathan, S.V., Varadan, V.V. and Varadan, V.K., 1999. Finite element simulation of smart structures using an optimal output feedback controller for vibration and noise control, Smart Materials and Structures, Vol. 8, No. 3, pp. 324–337.
Ray, M.C., 2003. Optimal control of laminated shells with piezoelectric sensor and actuator layers, AIAA Journal, Vol. 41, pp. 1151–1157.
Xu, S.X. and Koko, T.S., 2004. Finite element analysis and design of actively controlled piezoelectric smart structures, Finite Elements in Analysis and Design, Vol. 40, No. 3, pp. 241–262.
Peng, F., Ng, A. and Hu, Y.R., 2005. Actuator placement optimization and adaptive vibration control of plate smart structures, Journal of Intel Mater Syst Struct, Vol. 16, pp. 263–271.
Meng, G., Ye, L., Dong, X.J. and Wei, K.X., 2006. Closed loop finite element modeling of piezoelectric smart structures, Shock Vib, Vol. 13, No. 1, pp. 1–12.
Baz, A. and Ro, J., 1995. Optimum Design and Control of Active Constrained Layer Damping, ASME Journal of Vibrations and Acoustics, Vol. 117B, pp. 135-144.
Smith, W.A. and Auld, B.A., 1991. Modelling 1-3 composite piezoelectrics: thickness mode oscillations, IEEE Trans. Ultrason. Ferroelect. Freq. control, Vol. 31, pp. 40-47.
Hellen, L.C., Kun L. and Chung, L.C., 2003. Piezoelectric ceramic fiber/epoxy 1–3 composite for high frequency ultrasonic transducer application, Mater. Sci. Eng. B, Vol. 99, pp. 29–35.
Ray, M. C. and Pradhan, A. K., 2007. On the Use of Vertically Reinforced 1-3 Piezoelectric Composites for Hybrid Damping of Laminated Composite Plates, Mechanics of Advanced Materials and Structures, Vol. 14, pp. 245-261.
Jeung, Y. S. and Shen, I. Y., 2001. Development of Isoparametric, Degenerate Constrained Layer Element for Plate and Shell Structures, AIAA Journal, Vol. 39, pp. 1997-2005.
Kwak, M. K., Heo, S. and Jeong, M., 2009. Dynamic modelling and active vibration controller design for a cylindrical shell equipped with piezoelectr ic sensors and actuators, Journal of Sound and Vibration, Vol. 321, pp. 510-524.
Sheng, G.G. and Wang, X., 2009. Active control of functionally graded laminated cylindrical shells, Composite Structures, Vol. 90, pp. 448-457.
Tavakolpour, A.R., Mailah, M., Mat Darus, I.Z., Active vibration control of a rectangular flexible plate structure using high gain feedback regulator, (2009) International Review of Mechanical Engineering (IREME), 3 (5), pp. 579-587.
Reddy, J. N., 1997. Mechanics of Laminated Composite Plates Theory and Analysis, CRC Press, Boca Raton, FL.
Reddy, J.N. and Liu, C.F., 1985. A higher order shear deformation theory of laminated elastic shells, International Journal of Engineering Sciences, Vol. 23, No. 3, pp. 319-330.
Darus, I.Z.M., Zahidi Rahman, T.A., Mailah, M., Experimental evaluation of active force vibration control of a flexible structure using smart material, (2011) International Review of Mechanical Engineering (IREME), 5 (6), pp. 1088-1094.
Saad, M.S., Jamaluddin, H., Darus, I.Z.M., Iterative algorithm for active vibration control of flexible beam, (2012) International Review of Mechanical Engineering (IREME), 6 (1), pp. 61-73.
Isvandzibaei, M.R., Transient analysis vibration of two type FGM circular cylindrical shell based on third order theory using hamilton's principle with simply support-simply support boundary conditions, (2011) International Review on Modelling and Simulations (IREMOS), 4 (4), pp. 1920-1928.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
