Sn and Pb Additives Experimental Influence on Internal Combustion Engine Lubricant Concentration and Viscosity


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


The aim of this paper is to investigate the possibilities to use experimental model test to look the influence in concentration between commercially lubricant only and the same lubricant with solid additives in internal combustion engine. The tests were performed in a bus and tractor engines. The influences of different additives are studied. This study proved that the use of additives like Sn and Pb can cause decreased concentration in metal in internal combustion engine, and make it operate in a better condition. It was also seen that the solid additives package appears not to be enough as a lubricant concentration data, at least not in the tribological conditions.
Copyright © 2013 Praise Worthy Prize - All rights reserved.

Keywords


Tribo Catalytic; Regeneration; Lubricant

Full Text:

PDF


References


S. ATTYAOUI 'System self regeneration oil for MCI'-UVCSP-2001.

CASTROL. ABC lubrication structure, ownership and use of lubricants 08/2007.

J. Demension 'Understand and carry out experimental designs AFNOR 1996.

JLEGROUF: ABC lubrication 'Edition Technip 1961.

HITACHI: Ground Control No.: 6 Spring 2008 Series EX-6.

CASTROL: ABC lubrication, Structure, Properties and use: lubricants'.

MAN: 'Driver's Manual - Trucknology Generation Basoline TGA' 6th edition.

Regional Activity Center for Cleaner Production (RAC / CP): Opportunities for recycling and use of oils, 11/2000

SHELL ASEOL: Fuels and lubricants - SAB 09.03 600 f

AYEL J. M. BORN "Lubricants and fluids for automobiles", Editions Technip, 1998.

MONIKA IVANTYSYNOVA: Design and Modeling of Fluid Power Systems ME 597/ABE 591.

TOTAL: Paths of Sustainable Development - The disposal of waste oils, 02/2004.

RAFAELV.-D.: Environmental impact of used motor oil, Elsevier SP 79 (1989) 1 23.

R. LARSSON: Modelling the Effect of surface roughness on lubrication in all regimes, Tribology International 42 (2009) 512-516.

RADOSLAV Rakic: The Influence of lubricants on cam failure, Tribology International 37 (2004) 365-373.

A. Amoresano, G. Quaremba, V. Niola, Experimental Characterization of a Pressure Swirl Atomizer Working with High Viscous Fluids, (2012) International Review of Mechanical Engineering (IREME), 6 (6), pp. 1117-1124.

A. Benhamou, P. Maspeyrot, A. Bounif, An Experimental Model of Measurement of the Profile of Lubricating Film of the System Piston Cylinder, (2009) International Review of Mechanical Engineering (IREME), 3 (2), pp. 182-187.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize