Integration of the Basic Decisions of the Design of Cellular Manufacturing System


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


The current study provides a brief investigation of the literatures on the integration of the basic decisions on the design of Cellular Manufacturing (CM) system. These basic decisions are: (i) cell formation; (ii) cell layout and (iii) cell scheduling. The objectives and limitations of the integration of these fundamental decisions have been recognized. Future studies guidelines are suggested by taking into consideration the integration of another important issue in CM, this is the Feasibility Assessment (FA). The continuously considered of the real life data such as capacity of machines, sequence of processes, demand of products, alternative process plan has been suggested in the integration process to make the CMS more realistic
Copyright © 2013 Praise Worthy Prize - All rights reserved.

Keywords


Cellular Manufacturing; Feasibility Assessment; Cell Formation; Cell Layout; Cell Scheduling

Full Text:

PDF


References


A. Mukattash, S. Idwan, M.S. Ashhab, M. Samhouri and I.A. Matar, Optimal computerized model for designing cellular manufacturing systems using neural network, J. of Applied sciences, Vol. 11, n. 15, pp. 2837 -2842, 2011.
http://dx.doi.org/10.3923/jas.2011.2837.2842

U. Wemmerlov, and N.L. Hyer, Procedures for the part family, machine group identification problem in cellular manufacturing, J Opers Manag, Vol. 6, pp. 125–147, 1986.
http://dx.doi.org/10.1016/0272-6963(86)90021-5

T. J. Reene, and P.R. Sadowski, A review of cellular manufacturing assumptions, advantages and design technique, J Oper Manag, Vol. 4, n. 2, pp. 85–97, 1984.

X. Wu, C-H. Chu, Y. Wang and W. Yan, A genetic algorithm for cellular manufacturing design and layout, Eur J Oper Res, Vol. 181, pp. 156–167, 2007.
http://dx.doi.org/10.1016/j.ejor.2006.05.035

J. Arkat, M. H. Farahani and F. Ahmadizar, Multi-objective genetic algorithm for cell formation problem considering cellular layout and operations scheduling, International Journal of Computer Integrated Manufacturing, Vol. 25, n. 7, pp. 625–635, 2012.
http://dx.doi.org/10.1080/0951192x.2012.665182

M.D. Hassan, Layout design in group technology manufacturing, Int J Prod Econ, Vol. 38, pp. 173–188, 1995.
http://dx.doi.org/10.1016/0925-5273(94)00090-w

X. Wu, C-H. Chu, Y.Wang and D. Yue, Genetic algorithms for integrating cell formation with machine layout and scheduling, Comput. Ind. Eng, Vol. 53, pp. 277–289, 2007.
http://dx.doi.org/10.1016/j.cie.2007.06.021

B. Arvindh, and S. A. Irani, Principal component analysis for evaluating the feasibility of cellular manufacturing without initial machine-part matrix clustering, International Journal of Production Research, Vol. 32, n. 8, pp.1909-1938, 1994.
http://dx.doi.org/10.1080/00207549408957050

J. Arkat, M. H. Farahani and L. Hosseini, Integrating cell formation with cellular layout and operations scheduling, Int. J. Adv. Manuf. Technol, Vol. 61, n. 5, pp. 637-647, 2012.
http://dx.doi.org/10.1007/s00170-011-3733-4

J.L. Burbidge, Production Flow Analysis, The Production Engineer, Vol. 50, pp. 139, 1971.
http://dx.doi.org/10.1049/tpe.1971.0022

T.Wu, S. Chung and C. Chang, .A water flow-like algorithm for manufacturing cell formation problems, European Operational Research, Vol. 205, pp. 346–360, 2010.
http://dx.doi.org/10.1016/j.ejor.2010.01.020

S.P. Mitrofanov, Scientific Principles of Group Technology, Part I, Boston: National Lending Library of Science and Technology (Originally published in 1959 as Russian text), 1966.

P.K. Arora, A. Haleem and M. K. Singh, Cell Formation Techniques –A Study, International Journal of Engineering Science and Technology, Vol. 3, n. 2, pp. 1178-1181, 2011.

Chiha, I., Liouane, H., Liouane, N., A hybrid method based on Multi-Objective Ant Colony optimization and differential evolution to design PID DC motor speed controller, (2012) International Review on Modelling and Simulations (IREMOS), 5 (2), pp. 905-912.

Anari, R.G., Niknafs, S., Nasab, M.R.T., A new Fuzzy-Genetic algorithm for optimal capacitor placement and sizing in radial distribution systems, (2012) International Review on Modelling and Simulations (IREMOS), 5 (1), pp. 69-73.

Karami, M., Mariun, N., Ab Kadir, M.Z.A., Genetic algorithm-based optimal location of TCSC and SSSC in the power system network, (2010) International Review on Modelling and Simulations (IREMOS), 3 (6), pp. 1492-1500.

Y. Yin, and K. Yasuda, Similarity coefficient methods applied to the cell formation problem: a comparative investigation, Computers and Industrial Engineering, Vol. 48, pp. 471–489, 2005.
http://dx.doi.org/10.1016/j.cie.2003.01.001

Z. Albadawi, H.A. Bashir and M. Chen, A mathematical approach for the formation of cells, Computers and Industrial Engineering, Vol. 48, pp. 3-21, 2005.
http://dx.doi.org/10.1016/j.cie.2004.06.008

M. Murugan, and V. Selladurai, Manufacturing Cell Design with Reduction in Setup Time through Genetic Algorithm, Journal of Theoretical and Applied Information Technology, PP. 76-97, 2005.

H. Wafik, F. Masmoudi and M. Haddar, Principal component analysis model for machine-part cell formation problem in group technology. International Conference on Advances in Mechanical Engineering and Mechanics, Tunisie : eprint, 2006.

S.G. Ponnambalam, R. SudhakaraPandian, S.S. Mohapatra and S. Saravanasankar, Cell formation with workload data in cellular manufacturing system using genetic algorithm. International Conference on Industrial Engineering and Engineering Management, IEEE, 2-4 Dec, Monash Univ, Petaling Jaya, PP. 674 – 678, 2007.
http://dx.doi.org/10.1109/ieem.2007.4419275

B.H. Ateme-Nguema, and T-M. Dao, Optimization of Cellular Manufacturing Systems Design Using the Hybrid Approach Based on the Ant Colony and Tabu Search Techniques, International Conference on Industrial Engineering and Engineering Management, IEEE, 2-4 Dec, PP. 668 – 673, 2007.
http://dx.doi.org/10.1109/ieem.2007.4419274

A. Ahi, B. Ashtiani, M-B. Aryanezhad and A. Makui, An Investigation on the MultipleAttribute Decision Making (MADM) Methods for Solving the Cell Formation Problem. International Conference on Industrial Engineering and Engineering Management, IEEE, 2-4 Dec, 2007, PP. 709-712, 2007.
http://dx.doi.org/10.1109/ieem.2007.4419282

M.B. Aryanezhad, and J. Aliabadi, Considering Assembly Operations and Product Structure for Manufacturing Cell Formation, World Academy of Science, Engineering and Technology, Vol. 38, pp. 399-404, 2010.

T. Ghosh, M. Modak, P.K. Dan, SAPFOCS: a metaheuristic based approach to part family formation problems in group technology, International Journal of Management Science and Engineering Management, Vol.6, n. 3, pp. 231-240, 2011.

T. Ghosh, M. Modak, P.K. Dan, Coding and Classification Based Heuristic Technique for Workpiece Grouping Problems in Cellular Manufacturing System, International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, PP.53-72, 2011. eISSN: 1906-9642, Online Available at http://tuengr.com/V02/053-072.pdf.

M. Modak, T. Ghosh and P.K. Dan, Solving Component Family Identification Problems on Manufacturing Shop Floor, International Journal of Advancements in Technology, Vol. 2, n. 1, pp. 39- 56, 2011.

M. Chattopadhyay, S. Sengupta and P. K. Dan, Machine-Part cell formation through visual decipherable clustering of Self Organizing Map. International Journal of Advanced Manufacturing Technology, Vol. 52, n. 9-12, pp. 1019-1030, 2011.
http://dx.doi.org/10.1007/s00170-010-2802-4

M. S. Akturk, and A. Turkcan, Cellular manufacturing system design using a holonistic approach, Int. J. Prod. Res, Vol. 38, n. 10, pp. 2327-2347, 2000.
http://dx.doi.org/10.1080/00207540050028124

X. Wu, C-H. Chu, Y. Wang and W. Yan, A Genetic Algorithm for Integrated Cell Formation and Layout Decisions. Evolutionary Computation, CEC '02, Proceedings of the 2002 Congress, Vol. 2, pp. 1866-1871, 2002.
http://dx.doi.org/10.1109/cec.2002.1004527

C.P. Chiang, and S.D. Lee, Joint determination of machine cells and linear inter-cell layout. Computer and Operation Research, Vol. 31, n. 10, pp. 1603–1619, 2004.
http://dx.doi.org/10.1016/s0305-0548(03)00110-2

R. Tavakoli-Moghadam, B. Javadi, F.Jolai and S.M. Mirgorbani, Anefficient Algorithm to Inter and Intra-Cell Layout Problems in Cellular Manufacturing Systems with Stochastic Demands., IJE Transactions A: Basics, Vol. 19, n. 1, pp. 67-78, 2006.

X. Wu, C-H. Chu, Y. Wang and W. Yan, Concurrent design of cellular manufacturing systems: a genetic algorithm approach, Int J Prod Res, Vol. 44, n. 6, pp. 1217–1241, 2006.
http://dx.doi.org/10.1080/00207540500338252

C. Prafulla, P.C. Kulkarni and K. Shanker, A Genetic Algorithm for Layout problems in Cellular Manufacturing Systems. International Conference on Industrial Engineering and Engineering Management, IEEE, 2-4 Dec, PP. 694 – 698, 2007.
http://dx.doi.org/10.1109/ieem.2007.4419279

S. Kioon, Ah., Bulgak, A.A., and Bektas, Integrated cellular manufacturing systems design with production planning and dynamic system reconfiguration, European Journal of operational Research, Vol. 192, n. 2, pp. 414- 428, 2007.
http://dx.doi.org/10.1016/j.ejor.2007.09.023

I. Mahdavi, M. M. Paydar, A. Heidarzade and N. Mahdavi-Amiri, Application of Fuzzy Mathematical Approach for Cell Formation and Layout Design with Uncertain Condition, Proceedings of the World Congress on Engineering, Vol II, WCE July 2 - 4, London, U.K, 2008.

M.T. Leung, R. Quintana and An-S. Chen, A Paradigm for Group Technology Cellular Layout Planning in JIT Facility, International Conference on Industrial Engineering and Engineering Management, IEEM, IEEE, 8-11 Dec, PP. 1174-1178, 2008.
http://dx.doi.org/10.1109/ieem.2008.4738055

I. Mahdavi, B. Shiraziand M.M. Paydar, A flow matrix-based heuristic algorithm for cell formation and layout design in cellular manufacturing system, Int J Adv Manuf Tech, Vol. 39, pp. 943–953, 2008.
http://dx.doi.org/10.1007/s00170-007-1274-7

C-C. Chang, T-H. Wu and S-H. Chung, A novel approach for cell formation and cell layout design in cellular manufacturing system, International Conference on Management and Service Science, MASS '09, 20-22 Sept, PP. 1-4, 2009.
http://dx.doi.org/10.1109/icmss.2009.5304612

A. Ahi, M.B. Aryanezhad, B. Ashtiani and A. Makui, A novel approach to determine cell formation, intracellular machine layout and cell layout in the CMS problem based on TOPSIS method. Computer Operation Research, Vol. 36, pp. 1478–1496, 2009.
http://dx.doi.org/10.1016/j.cor.2008.02.012

S. Saghafian, and M. Reza AkbariJokar, Integrative Cell Formation and Layout Design in Cellular Manufacturing Systems, Journal of Industrial and Systems Engineering, Vol. 3, n. 2, pp. 97-115, 2009.

M.M. Paydar, and N. Sahebjamnia, Designing a mathematical model for cell formation problem using operation sequence, Journal of Applied Operational Research, Vol.1, n. 1, pp. 30–38, 2009.

I. Mahdavi, M.M. Paydar, M. Solimanpur and M. Saidi-Mehrabad, Amethematical model for integrating cell formation problem with machine layout, International Journal of Industrial Engineering & Production Research, Vol. 21, n. 2, pp. 61-70, 2010.

C-C. Lin, C-C. Chang and F-C. Li, An Efficient Tabu Search Approach to Determine Cell Formation Problem with Consideration of Cell Layout. International conference on industrial engineering and engineering management TEEM-IEEE, 6-9 Dec, PP. 1441-1445, 2011.
http://dx.doi.org/10.1109/ieem.2011.6118155

I. Mahdavi, M.M. Paydar and M. Solimanpur, Solving a new mathematical model for cellular manufacturing system: A fuzzy goal programming approach, Iranian Journal of Operations Research, Vol. 2, n. 2, pp. 35-47, 2011.
http://dx.doi.org/10.1109/ieem.2008.4738065

Sh. Ariafar, N. Ismail, S.H. Tang, M.K.A.M. Ariffin and Z. Firoozi, A stochastic facility layout model in cellular manufacturing systems, International Journal of the Physical Sciences, Vol. 6, n. 15, pp. 3754-3758, 2011.
http://dx.doi.org/10.1504/ijise.2011.043482

F. Khaksar-Haghani, R. Kia, I. Mahdavi, N. Javadianand M. Kazemi, Multi-floor layout design of cellular manufacturing systems, International Journal of Management Science and Engineering Management, Vol. 6, n. 5, pp. 356-365, 2011.
http://dx.doi.org/10.1109/iccsn.2011.6014997

C.M. Moncayo, D. A. Garzón Alvarado and J. M. Arroyo Osorio, Solution of cell manufacturing layout problem through a discrete hybrid BFOA-GA, Eng Opt – 3rd International Conference on Engineering Optimization Rio de Janeiro, Brazil, 1 - 5 July, 2012.

P.M. Franca, J. N. D. Gupta, A.S. Mendes P. Moscato and K. J.Veltink, Evolutionary algorithms for scheduling a flow shop manufacturing cell with sequence dependent family setups. Comput. Ind. Eng, Vol. 48, pp. 491–506, 2005.
http://dx.doi.org/10.1016/j.cie.2003.11.004

V.R. Ghezavatia, A new stochastic mixed integer programming to design integrated cellular manufacturing system: A supply chain framework, International Journal of Industrial Engineering Computations, Vol. 2, pp. 563-574, 2011.
http://dx.doi.org/10.5267/j.ijiec.2011.03.003

M.B. Aryanezhada, J. Aliabadia and R. Tavakkoli-Moghaddamb, A new approach for cell formation and scheduling with assembly operations and product structure, International Journal of Industrial Engineering Computations, Vol. 2, pp. 533–546, 2011.
http://dx.doi.org/10.5267/j.ijiec.2010.06.002

J. Geonwook, and R. L. Herman, Forming part families by using genetic algorithms and designing machine cells under demand changes. Computers and Operations Research, Vol. 33, pp. 263-283, 2006.
http://dx.doi.org/10.1016/j.cor.2005.03.033

H.A. Basher and S. Karaa, Assessment of clustering tendency for the design of cellular manufacturing systems, Journal of Manufacturing Technology Management, Vol. 19, n. 8, pp.1004-1014, 2008.
http://dx.doi.org/10.1108/17410380810911754

G.H. Dunteman, Principal Components Analysis, 2ndEdn, Sage Publication. Newbury Park, CA, USA, 1989.

R.A. Maleki,R, Flexible Manufacturing Systems: The Technology and Management, Prentice Hall, 1991.

L. Luong, J.He, K. Abhary and L. Qiu, A decision support system for cellular manufacturing system design, Comput. Ind. Eng, Vol. 42, pp. 457-70, 2002.
http://dx.doi.org/10.1016/s0360-8352(02)00032-3



Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize