| Issue | Title | |
| Vol 2, No 6 (2014) | Influence of Heat Treatments on the Impact Strength for Welded Constructions | Abstract |
| M. Zaoui, A. Bouchoucha | ||
| Vol 1, No 4 (2013) | Instant Hot Water Generation System for Domestic Utility in Rural Areas | Abstract |
| P. Selvakumar, P. Somasundaram | ||
| Vol 1, No 1 (2013) | Investigation on Thermal Balance of CI Engine Fuelled by Pongamia Pinnata Biodiesel and Hydrogen as Secondary Fuel | Abstract |
| C. Jegadheesan, P. Somasundaram | ||
| Vol 4, No 1 (2016) | Kinetic Study of Thermal Degradation of RTM6 Containing TiO2 by Thermogravimetry | Abstract |
| L. Merad, M. Cochez, F. Jochem, Y. Guedra, M. Ferriol, B. Benyoucef | ||
| Vol 3, No 4 (2015) | LBM Mesoscale Modeling of Porous Media | Abstract |
| A. Nabovati, A. C. M. Sousa | ||
| Vol 1, No 1 (2013) | Liquid Internal Cooling of High-Power Synchronous Permanent Magnet Generator Winding in Arctic Conditions | Abstract |
| M. Polikarpova, P. Röyttä, J. Pyrhönen | ||
| Vol 3, No 2 (2015) | Manufacturing Extrusion Process for Forced Convection Micropolar Fluids Flow with Magnetic Effect Over a Stretching Sheet | Abstract |
| Kai-Long Hsiao | ||
| Vol 2, No 3 (2014) | Measurement of Thermal Expansion by Moiré Interferometry | Abstract |
| S. Meguellati, D. Bouzid | ||
| Vol 2, No 6 (2014) | Mechanical and Tribological Characterization of an Alloy of Surface Fe-Cr Formed by Laser Remelting and the Effect of the Heat Treatment on the TTS | Abstract |
| H. Boudoukha, S. Djabi, B. Coquillet | ||
| Vol 2, No 2 (2014) | Mixed Convection of Micropolar Fluids Flow with Ohmic and Radiation Effects Past a Stretching Sheet | Abstract |
| Kai-Long Hsiao | ||
| Vol 1, No 1 (2013) | Model-Based Approach for Investigation of Ladle Lining Damages | Abstract |
| Emil G. Mihailov, Venko I. Petkov, Ivan V. Doichev, Kosta P. Boshnakov | ||
| Vol 1, No 1 (2013) | Numerical Analysis on Heat Transfer Enhancement and Wall Shear Stress of an Alumina Nanofluid for Different Forced Convection Flows | Abstract |
| Alina A. Minea, Oronzio Manca | ||
| Vol 1, No 2 (2013) | Numerical Flow and Heat Transfer in a Channel with Various Shaped Ribs | Abstract |
| M. Kanoun, M. Baccar, M. Mseddi | ||
| Vol 3, No 1 (2015) | Numerical Heat and Mass Transfer for Viscous Flow Past a Nonlinearly Stretching Sheet | Abstract |
| Kai-Long Hsiao, Guan-Bang Chen | ||
| Vol 1, No 6 (2013) | Numerical Investigation of Laminar Forced Thin Film Condensation of a Saturated Vapor Along a Vertical Wall Covered with a Porous Material: Effect of Prandtl and Froude Numbers | Abstract |
| Momath Ndiaye, Cheikh Mbow, Joseph Sarr, Belkacem Zeghmati, Modou Faye | ||
| Vol 4, No 3 (2016) | Numerical Investigation on Potential Effects Induced by Rotor-Stator Interaction in an Axial Turbine | Abstract |
| C. Deslot, P. Kulisa, F. Bario | ||
| Vol 1, No 2 (2013) | Numerical Simulation of Capillary Pump Evaporator Using Water for Different Inclination Angles | Abstract |
| Nikolaos A. Avgerinos, Dionissios P. Margaris | ||
| Vol 2, No 1 (2014) | Numerical Simulation of Natural Convection of Nanofluid in a Square Enclosure with a Protruding Isothermal Heater | Abstract |
| Mohamed El Hattab, Rachid Mir, Youness El Hammami | ||
| Vol 3, No 4 (2015) | Numerical Simulation of Solidification Processes in Continuous Casting. Part II: Influence of Cooling Intensity | Abstract |
| R. Boumedmed, M. Belahouel | ||
| Vol 1, No 5 (2013) | Numerical Simulation Study of the Structure of the Separated Flow Around Obstacles: Curved Edge Effect | Abstract |
| Z. Sari-Hassoun, K. Aliane, O. Sebbane | ||
| Vol 2, No 2 (2014) | Numerical Study of Natural Convection in a Square Porous Cavity Heated by Bottom Wall | Abstract |
| W. Alimi, R. Chouikh, A. Guizani | ||
| Vol 1, No 6 (2013) | Numerical Study of the Thin Film-Type Condensation of Saturated Forced Into a Vertical Wall Covered with a Porous Material Vapor Convection | Abstract |
| Momath Ndiaye, Cheikh Mbow, Joseph Sarr, Belkacem Zeghmati | ||
| Vol 1, No 1 (2013) | Numerical Study of Turbulent Heat Transfer in Separated Flow: Review | Abstract |
| Hussein Togun, Tuqa Abdulrazzaq Fliyyah, Kazi Md Salim Newaz, Abdul Amir H. Kadhum, Ahmed Badarudin, Mohd Khairol Anuar Mohd Ariffin, Emad Sadeghinezhad | ||
| Vol 1, No 1 (2013) | Optimization of Rectangular Microchannel Depth Under Forced Convection Heat Transfer Condition | Abstract |
| B. S. Gawali, D. A. Kamble | ||
| Vol 3, No 1 (2015) | Optimum Time Available for Fast Ignition in Inertial Confinement Fusion | Abstract |
| M. J. Tabatabaei, A. Ghasemizad | ||
| 51 - 75 of 101 Items | << < 1 2 3 4 5 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize