| Issue | Title | |
| Vol 3, No 4 (2015) | A Differential-Algebraic Approach for Dynamic Modeling of Diesel Engine Particulate Aftertreatment Systems | Abstract |
| F. Su, B. W. Gordon, H. Hong | ||
| Vol 1, No 2 (2013) | A Hydrodynamic and Mass Comparative Study in the Field of Energy Consumption between a Chamfered and a Straight Bladed | Abstract |
| Benyamina Leila, Rebhi Mebrouk, Draoui Belkacem, Beloufa Larbi | ||
| Vol 2, No 5 (2014) | A Method for Accurate Low-Dimensional Approximation of Luikov Equations | Abstract |
| E. Palomo del Barrio, A. Sempey, M. Duquesne | ||
| Vol 2, No 2 (2014) | A Neural Approach to Estimate the Radiation Damage of the Solar Panels | Abstract |
| F. Djeffal, M. Chahdi | ||
| Vol 4, No 3 (2016) | A Novel Analysis and Simulation for MQW Laser Including Rollover Effect | Abstract |
| M. Dehghan | ||
| Vol 3, No 4 (2015) | A Sensitivity Study Approach on Heat Transfer in the Internal Combustion Engine | Abstract |
| S. Larbi, M. T. Attouchi | ||
| Vol 1, No 6 (2013) | A Simplified Model for Flow Boiling in Expanding Circular Micro-Channels | Abstract |
| Essam A. Ibrahim, Milton R. Jaime, Patrick J. Geoghegan | ||
| Vol 2, No 4 (2014) | Air Flow Patterns and Thermal Behavior in “King Tutankhamen Tomb” | Abstract |
| E. E. Khalil | ||
| Vol 1, No 1 (2013) | Analysis and Modeling of Heat Generation in Overcharged Li-Ion Battery with Passive Cooling | Abstract |
| Paul T. Coman, Christian T. Veje | ||
| Vol 3, No 2 (2015) | Analysis of a Heat Source and Sink in a Partially Open Enclosure | Abstract |
| Matthew McGarry, James Kohl | ||
| Vol 1, No 5 (2013) | Analysis of the Anomalous Thermal Properties of Phase Change Materials Based on Paraffin Wax and Multi Walls Carbon Nanotubes | Abstract |
| W. G. Alshaer, E. Palomo del Barrio, M. A. Rady, O. E. Abdellatif, S. A. Nada | ||
| Vol 3, No 2 (2015) | Analysis of the Quasi Periodic Scenario Leading to Chaos in a Square Cavity | Abstract |
| S. Laouar, E. Mezaache, M. Daguenet | ||
| Vol 2, No 4 (2014) | Analysis of the Thermal Behavior of a Ventilated Disc Brake | Abstract |
| M. Kaffel, H. Kchaou, M. Baccar | ||
| Vol 3, No 3 (2015) | Bubble Two-Phase Flow Simulation with Volume of Fluid Interface Tracking Method | Abstract |
| D. Merrouche, K. Mohammedi, I. Belaidi | ||
| Vol 1, No 4 (2013) | Catering Meals Under Blast-Cooling: Comparison between Zero and First-Order Modeling with Respect to Spatial Dependence of Temperature | Abstract |
| José A. Rabi, Isabelle Trezzani-Harbelot, Elisabeth Morelli, Jacques Guilpart | ||
| Vol 2, No 4 (2014) | CFD Analysis of Heat Transfer in Reciprocating Helical Coil with Piston Cooling Application | Abstract |
| P. W. Deshmukh, S. N. Sapali | ||
| Vol 1, No 2 (2013) | CFD Simulation and Experimental Investigation of Convection Heat Transfer in a Rectangular Convergent Channel with Staggered Ribs | Abstract |
| K. Sivakumar, E. Natarajan, N. Kulasekharan | ||
| Vol 2, No 6 (2014) | Comparison of Optimum Finite Element Method vs. Differential Quadrature Method in Two-dimensional Heat Transfer Problem | Abstract |
| M. M. Fakir, S. Basri, R. Varatharajoo, A. A. Jaafar, A. S. M. Rafie, D. L. A. Majid | ||
| Vol 4, No 1 (2016) | Comparison of the VOF Methods with One and Two Fluids for Simulating the Free Surface Tracking Problem | Abstract |
| M. Hammami, M. Baccar, M. Mseddi | ||
| Vol 2, No 5 (2014) | Computation of Turbulent Forced Convection in Heat Exchangers Equipped with the Transverse Baffles | Abstract |
| R. Saim, S. Abboudi, B. Benyoucef, A. Azzi | ||
| Vol 1, No 3 (2013) | Condensation Heat Transfer Characteristics of R22, R134a, R410A and R407C on Single Horizontal Plain and Finned Tubes | Abstract |
| Talaat A. Ibrahim, Mohamed A. M. Hassan | ||
| Vol 4, No 2 (2016) | Continuous Cooling Transformation (CCT) Diagram for the AISI H13 Hot Work Tool Steel | Abstract |
| S. Ben Slima, J. Briki | ||
| Vol 2, No 5 (2014) | Contribution to Thermo-Hydrodynamic Study of Journal Bearing Under a Stationary Load | Abstract |
| Redouane Benzeguir, Djelloul Rezini, Nacer Tala Ighil, Abdelhamid Bounif | ||
| Vol 1, No 6 (2013) | Design Simulation of Filing Sequence and Solidification Time for Cast Metal Matrix Composite by Low Pressure Die Casting | Abstract |
| R. S. Taufik, S. Shamsuddin, K. K. Mak, A. A. Tajul, M. A. M. Khairul Anuar, B. B. T. Hang Tuah | ||
| Vol 1, No 1 (2013) | Determination of Stationary Temperature Distribution in Shielded Cables of Finite Length | Abstract |
| Florian Loos, Karl Dvorsky, Hans-Dieter Ließ | ||
| 1 - 25 of 101 Items | 1 2 3 4 5 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize