Open Access Open Access  Restricted Access Subscription or Fee Access

Motor Vehicle Condition Monitoring and Recording System Using Arduino Mega


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iree.v16i3.18344

Abstract


Transportation is needed to overcome the gap in distance and communication between the place of origin and the one of destination. For this reason, transportation and communication systems have been developed in the form of facilities (vehicles) and infrastructures (roads). Safety and security in driving are important in every country in the world, especially in Indonesia. Over the past five years, traffic accidents in Indonesia have claimed nearly eight hundred thousand lives. About 17 percent of the accident rate has resulted in many deaths. Most motor vehicle accidents occur because of drivers and motor vehicle conditions. Therefore, a monitoring system for both the condition of the driver and the condition of the vehicle, especially on four-wheeled vehicles, is needed. This study is focused on monitoring and recording the condition of motorized vehicles. If a malfunction of the motor vehicle's vital functions occurs, this system will provide an early warning. Then the recording function is carried out as a preventive measure for periodic motor vehicle condition analysis so that prevention efforts can be made. The parameters to be monitored and recorded are the orientation of motion, speed, and position of the motorized vehicle. Then the vehicle recording data can be monitored in real-time and can be downloaded wirelessly. Based on the results of testing the system, both monitoring and recording have obtained an accuracy for Rolls of 99.50%, Pitches of 99.21%, and Yaw of 99.5%. As for the position with GPS, the accuracy results are very good at 99.99%.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Motion Orientation; Position; Monitoring; Recording

Full Text:

PDF


References


Central Bureau of Statistics, 2016, Number of Accidents, Dead Body, Severe Injuries, Minor Injuries, and Material Losses suffered in 1992-2016, accessed last 15 August 2018.
https://www.bps.go.id/linkTableDinamis/view/id/1134

Gilbert, E.P.K., Kaliaperumal, B., dan Rajsingh, E.B., 2012, Research Issues in Wireless Sensor Network Applications: A Survey, International Journal of Information and Electronics Engineering, Vol. 2, No. 5

Yu, S. H., Shih, O. dan Tsai, H. M., 2013, Smart Automotive Lighting for Vehicle Safety, IEEE Communications Magazine, December 2013

Nassar, A. dan Nassar, E., 2013, Design of Smart Car, Universal Journal of Mechanical Engineering, Vol. 1, No. 1

Graham, B. B., 2000, Using an Accelerometer Sensor to Measure Human Hand Motion, Thesis, Electrical Engineering, and Computer Science, Massachusetts Institute of Technology, Massachusetts

Tian, B., Liu, H., Yang, N., Zhao, Y. dan Jiang, Z., 2016, Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect, Sensor, Vol. 16, p. 1587.
https://doi.org/10.3390/s16101587

Trusov, A.A, 2011, Overview of MEMS Gyroscopes: History, Principles of Operations, Types of Measurements, laboratory report, Mechanical and Aerospace Engineering University of California, California

Xia D, Yu C, Kong L. The Development of Micromachined Gyroscope Structure and Circuitry Technology. Sensors. 2014; 14(1):1394-1473.
https://doi.org/10.3390/s140101394

Devare, A., Hande, A., Jha, A., Sanap, S., dan Gawade, S., 2016, Internet of Things for Smart Vehicles, Sensor, Vol. 5, Issue 5

Farooq, M.U., Waseem, M., Mazhar, S., Hairi, A. dan Kamal, T., 2015, A Review on Internet of Things, International Journal of Computer Applications, Vol. 113, N0. 1

Sharma, V. dan Tiwari, R.,2016, A Review Paper on IoT and it's Smart Applications, International Journal of Science, Engineering and Technology Research, Volume 5, Issue 2

Zanella, A., Bui, N., Castellani, A., Vangelista, L., dan Zorzi, M., 2014, Internet of Things for Smart Cities, IEEE Internet Of Things Journal, Vol. 1, No. 1
https://doi.org/10.1109/jiot.2014.2306328

Desai, M, 2017, Internet of Things based vehicle monitoring system 2017 Fourteenth International Conference on Wireless and Optical Communications Networks (WOCN) IEEE.
https://doi.org/10.1109/wocn.2017.8065840

Khan A., Bibi F., Dilshad M., Ahmed S., Ullah Z., Ali H., 2018, Accident Detection and Smart Rescue System using Android Smartphone with Real-Time Location Tracking. Int. J. Adv. Comput. Sci. Appl.;9:341–355
https://doi.org/10.14569/ijacsa.2018.090648

Al-Mayouf Y.R.B., Mahdi O.A., Taha N.A., Abdullah N.F., Khan S., Alam M., 2018, Accident Management System Based on Vehicular Network for an Intelligent Transportation System in Urban Environments. J. Adv. Transp.:6168981
https://doi.org/10.1155/2018/6168981

Ahmmed, N., Jenny, N.J., Houya, M.F.A., Alam, A.I.B., Arefeen, M.A., 2019, VADet : An Arduino based automated vehicle accident detection and messaging system, 2019 1st International Conference on Advances in Science, Engineering and Robotics Technology (ICASERT). IEEE, 2019(Icasert), pp. 1–5
https://doi.org/10.1109/icasert.2019.8934649

Guo, J., Du, J. and Xu, D., 2018, Navigation and positioning system applied in underground driverless vehicle based on IMU, Proceedings - 2018 International Conference on Robots and Intelligent System, ICRIS 2018, pp. 13–16.
https://doi.org/10.1109/icris.2018.00012

Srinivasan, A., 2018, IoT cloud based real time automobile monitoring system 3rd IEEE International Conference on Intelligent Transportation Engineering (ICITE) pages 231–235.
https://doi.org/10.1109/icite.2018.8492706

Fahmi, F., Nurmayadi, F., Siregar, B., Yazid, M., and Susanto, E., 2019, Design of Hardware Module for the Vehicle Condition Monitoring System Based on the Internet of Things, IOP Conference Series: Materials Science and Engineering 648, pp. 1 - 5
https://doi.org/10.1088/1757-899x/648/1/012039

Padmaja, B.V.S, Kolluru, V.M, and Kota, S.S., 2019, IoT based Implementation of Vehicle Monitoring and Tracking system using Node MCU, International Journal of Innovative Technology and Exploring Engineering (IJITEE), Volume-8 Issue-6

Shafi, U., Safi, A., Shahid, A.R., Ziauddin, S., and Saleem, M.Q., 2018, Vehicle Remote Health Monitoring and Prognostic Maintenance System, Journal of Advanced Transportation, Volume 2018, Hindawi.
https://doi.org/10.1155/2018/8061514

Babu, M. S., Anirudh, T. A., and Jayashree, P., 2016, Fuzzy system-based vehicle health monitoring and performance calibration, in Proceedings of the 2016 International Conference on Electrical, Electronics, and Optimization Techniques, ICEEOT 2016, pp. 2549–2554, India
https://doi.org/10.1109/iceeot.2016.7755153

Tsunashima, H., 2019, Condition Monitoring of Railway Tracks from Car-Body Vibration Using a Machine Learning Technique, Appl. Sci. 2019, 9, 2734
https://doi.org/10.3390/app9132734

Fizzah, B., Munam, A.S.,Carsten, M., and Saif, U.I., 2019, A Novel Internet of Things-Enabled Accident Detection and Reporting System for Smart City Environments, Sensors (Basel), 19(9): 2071
https://doi.org/10.3390/s19092071

Ahmed, S. M., Marhoon, H. M. and Nuri, O., 2018, Implementation of smart anti-theft car security system based on GSM, International Journal of Engineering & Technology, 7(4), pp. 5261–5265.

Bani Yassein, M., Aljawarneh, S., Al-Saad, M., An Efficient On-Demand Constrained Application Protocol for Internet of Things, (2018) International Journal on Communications Antenna and Propagation (IRECAP), 8 (3), pp. 232-239.
https://doi.org/10.15866/irecap.v8i3.13186

Sánchez Ocaña, W., Abata, A., Jácome, E., Mora, M., Distributed Systems and Industrial Communication Networks with the Internet of Things, Aimed at Industry 4.0, (2019) International Review of Automatic Control (IREACO), 12 (5), pp. 229-235.
https://doi.org/10.15866/ireaco.v12i5.17687

Zhalnin, V., Zakharova, A., Uzenkov, D., Vlasov, A., Krivoshein, A., Filin, S., Configuration-Making Algorithm for the Smart Machine Controller Based on the Internet of Things Concept, (2019) International Review of Electrical Engineering (IREE), 14 (5), pp. 375-384.
https://doi.org/10.15866/iree.v14i5.16923

Gehlot, A., Singh, R., Thakur, A., Choudhury, S., Das, P., Gupta, K., Wireless Monitoring and Acquisition of Engine Noise Data Using IoT, (2020) International Journal on Engineering Applications (IREA), 8 (6), pp. 215-222.
https://doi.org/10.15866/irea.v8i6.19430

Angrisani, L., Bonavolontà, F., Dassi, C., Liccardo, A., Schiano Lo Moriello, R., Tocchi, A., On the Suitability of Compressive Sampling for LoRa Signals Classification, (2020) International Review of Electrical Engineering (IREE), 15 (3), pp. 187-198.
https://doi.org/10.15866/iree.v15i3.18129


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize