Open Access Open Access  Restricted Access Subscription or Fee Access

Implementation of the Different Modulus UP/DOWN Sequence Synchronous Digital Decade Counter by IC 74HC190 and its Simulation


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iree.v16i2.20064

Abstract


This paper focuses on designing digital circuits, which enables the integrated circuit with fixed-function to perform the specific sequential behavior and simulation of the implemented circuit by computer simulation program. A large number of fixed-function Integrated Circuits (IC) that can be used to achieve specific functions according to designer requirements, depending on specific applications in digital systems. For circuit designers, before the manual hardware design, it is very important to simulate the designed circuits, using software tools, enabling the designer to verify the functionality of the designed circuit in every step during this process. The IC 74HC190 with fixed-function can be configured to perform the UP/DOWN sequence synchronous digital decade counters with different modulus, according to the specific cases of the operation. Using the CAD (Computer Aided Design) tools during designing phase of any digital circuits significantly improves the efficiency of the digital systems depending on designing system requirements. The obtained results through the software tools after simulating the implemented circuits will help designers to predict the performance of the new designed circuits, as well to detect mistakes during this phase.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Asynchronous Load; Binary State; Binary Sequence; Cascade; Modulus; Truncated Sequence

Full Text:

PDF


References


Adel S. Sedra, Kenneth C. Smith, Microelectronic Circuits (7th edition, Oxford University Press, 2019).

Richard C. Jaeger, Travis N. Blalock, Microelectronic Circuit Design (5th edition, McGraw-Hill, 2016).

Sung-Mo Kang, Yusuf Leblebici,Chulwoo Kim, CMOS Digital Integrated Circuits (4th edition, McGraw-Hill, 2014).

Sarah Harris, David Harris, Digital Design and Computer Architecture (1st edition, Morgan Kaufmann, 2015).

John F. Wakerly, Digital Design: Principles and Practices (5th edition, Pearson, UK, 2018).

R. Jacob Baker, CMOS: Circuit Design, Layout, and Simulation (4th edition, Wiley-IEEE Press, 2019).

M. Morris Mano, Michael Ciletti, Digital Design: With an Introduction to the Verilog HDL, VHDL, and SystemVerilog (6th edition, Pearson, 2017).

Bakar, A., Utomo, W., Taufik, T., Ponniran, A., Modeling of FPGA- and DSP-Based Pulse Width Modulation for Multi-Input Interleaved DC/DC Converter, (2019) International Review of Electrical Engineering (IREE), 14 (1), pp. 79-85.
https://doi.org/10.15866/iree.v14i1.13928

Max Rabiee, Goodheart-Willcox, Programmable Logic Controllers Hardware and Programming (3nd edition, Goodheart-Willcox, 2012).

El Kari, B., Ayad, H., El Kari, A., Mjahed, M., Pozna, C., Design and FPGA Implementation of a New Intelligent Behaviors Fusion for Mobile Robot Using Fuzzy Logic, (2019) International Review of Automatic Control (IREACO), 12 (1), pp. 1-10.
https://doi.org/10.15866/ireaco.v12i1.14802

M. Ferdjallah, Introduction to Digital Systems: Modeling, Synthesis, and Simulation Using VHDL (Wiley, 2011).
https://doi.org/10.1002/9781118007716

L. A. Ajao, M. A. Adegboye, J. Agajo, A. O. Ajao, A. A. Yunus, FPGA Logic Circuit Implementation and Synthesis with VHDL Programming: A Learning Approach, International Journal of Computer Science and Communication, vol 2 n. 1, November 2017, pp. 1-11,

Alkurwy, S., Al-Azawi, S., Al Darraji, N., FPGA Implementation of FIR Filter Design Based on Novel Vedic Multiplier, (2019) International Review on Modelling and Simulations (IREMOS), 12 (2), pp. 66-71.
https://doi.org/10.15866/iremos.v12i2.16322

Thomas L. Floyd, Digital Fundamentals (11th edition Pearson, Education Limited, England, 2015).

M. Morris Mano, Michael Ciletti, Digital Design: With an Introduction to the Verilog HDL, VHDL, and SystemVerilog (6th edition, 2017, Pearson, UK, 2017).

Richard S. Sandige, Michael L. Sandige, Fundamentals of Digital and Computer Design with VHDL (1st edition, McGraw-Hill, New York, NY 10020, 2012).

Dennis Fitzpatrick, Analog Design and Simulation using OrCAD Capture and PSpice (2nd edition, Newnes, Oxford, UK, 2017).
https://doi.org/10.1016/b978-0-08-097095-0.00013-1

Nassir H. Sabah, Circuit Analysis with PSpice: A Simplified Approach (1st edition, CRC Press, 2017).

James W. Nilsson, Susan A. Riedel, Introduction to PSpice Using OrCad Release 16.2: Electric Circuits (9th edition, Prentice Hall, 2010).

Bashir Al-Hashimi, The Art of Simulation Using PSpice: Analog and Digital (1st edition, CRC Press, 2019).

Galia Marinova, Dimitar Dimitrov, Learning Optimal Synthesis of Voltage Regulators using PSPICE, COMPEL International journal for computation and mathematics in electrical and electronic engineering, vol. 30 n. 4, 2011, pp. 1433-1448.
https://doi.org/10.1108/03321641111133307

Lihua Yuan, Guodong Ren, Chunni Wang, Synchronization of Neuronal Circuits with Ring Connection on PSpice, Journal of Control Science and Engineering, vol. 2016, Article ID 3414909, pp, 1-10.
https://doi.org/10.1155/2016/3414909

Muchlas Muchlas, Pramudita Budiastuti, Development of Learning Devices of Basic Electronic Virtual Laboratory Based on PSPICE Software, Journal of Vocational Education Studies (JOVES), vol. 3 n, 1, 2020, pp. 1-18, 2020.
https://doi.org/10.12928/joves.v3i1.2085

Syed Abdul Rahman Kashif, Muhammad Asghar Saqib,The use of Simulink and PSpice as educational tools in the teaching of power electronics, Australian Journal of Electrical and Electronics Engineering, vol. 4 n. 1, 2015, pp. 55-61, 2015.
https://doi.org/10.1080/1448837x.2008.11464172

Farzin Asadi, Nurettin Abut, KUCA: Kocaeli University Converter Analysis simulation software in power electronics, International Journal of Advanced and Applied Sciences, vol. 3 n.12, December 2016, pp. 55-61.
https://doi.org/10.21833/ijaas.2016.12.008

Abeer Alsadoon, P.W.C. Prasad, Azam Beg, Using software simulators to enhance the learning of digital logic design for the information technology student, European Journals of Engineering, vol. 42 n.5, 2016, pp. 533-546.
https://doi.org/10.1080/03043797.2016.1196344

Ogri J. Ushie, Maysam Abbod, Evans Ashigwuike, Matlab Symbolic Circuit Analysis and Simulation Tool using PSpice Netlist for Circuits Optimization, International Journal of Engineering and Technology Innovation, vol. 5 n. 2, 2015, pp. 75-86.

Jobaneh, H., The Design of an Ultra-Low-Power 7.5 GHz LNA in 0.13µm CMOS Technology with Cascode and Common-Source Topology, (2020) International Review of Electrical Engineering (IREE), 15 (4), pp. 336-343.
https://doi.org/10.15866/iree.v15i4.18226

Noori, A., Kamal, A., Mohammed, S., Humada, A., Design and Implementation of Biquad Filters Using CMOS Circuit Based Active Elements, (2019) International Review of Electrical Engineering (IREE), 14 (2), pp. 141-147.
https://doi.org/10.15866/iree.v14i2.16373

S. Douss, F. Touati and M. Loulou, Design Optimization Methodology of CMOS Active Mixers for Multi-Standard Receivers, World Academy of Science, Engineering and Technology, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, vol. 1 no. 9, 2007, pp. 1328-1336.

Anastasios Vilouras, Hadi Heidari, Shoubhik Gupta, Ravinder Dahiya, Modeling of CMOS Devices and Circuits on Flexible Ultrathin Chips, IEEE Transactions on Electron Devices, vol. 64 n. 5, 2017, pp. 2038- 2046.
https://doi.org/10.1109/ted.2017.2668899


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize