Open Access Open Access  Restricted Access Subscription or Fee Access

Design of Brushless DC Motor with Stator Magnetic Core Made of Amorphous Magnetic Material for Gas and Oil Industry


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/iree.v13i4.15233

Abstract


This paper presents the design of a permanent-magnet brushless DC motor with stator magnetic core made of an amorphous magnetic material, which allows to increase the efficiency of the developed brushless DC motor for gas and oil industry. A comparison of different winding types of BLDC based on the results of computer simulation and calculations is presented. In addition, the experimental prototype of the developed brushless DC motor and its control system have been created, and an experimental research has been made. The discrepancy between the experimental results and computer simulation data is below 7 %. The obtained results can be used in the BLDC design.
Copyright © 2018 Praise Worthy Prize - All rights reserved.

Keywords


Brushless DC Motor; Stator Magnetic Core; Amorphous Magnetic Material; Winding Type; Gas and Oil Industry

Full Text:

PDF


References


L. Durantay, N. Velly, J. F. Pradurat, M. Chisholm, New testing method for large high-speed induction motors. IEEE Transactions on Industry Applications, vol. 53, n. 1, 2017, 7571166, pp. 660–666.
http://dx.doi.org/10.1109/tia.2016.2602331

R. El-Mahayni, Al-Qahtani, A. H. Al-Gheeth, Large Synchronous Motor Failure Investigation: Measurements, Analysis, and Lessons Learned. IEEE Transactions on Industry Applications, vol. 52, n. 6, 2016, 7515236, pp. 5318–5326.
http://dx.doi.org/10.1109/tia.2016.2592461

M. De Martin, F. Luise, S. Pieri, A. Tessarolo, C. Poloni, Numerical multi-objective optimization of a squirrel cage induction motor for industrial application. Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems, 2016 March 7, 7426999, pp. 170–175.
http://dx.doi.org/10.1109/optim.2015.7426999

G. Pellegrino, A. Vagati, B. Boazzo, P. Guglielmi, Comparison of Induction and PM Synchronous Motor Drives for EV Application Including Design Examples. IEEE Transactions on Industry Applications, vol. 48, n. 6, 2012, 13191400, pp. 2322–2332.
http://dx.doi.org/10.1109/tia.2012.2227092

Rami Dabbousi, Djordje Savinovic, Yngve Anundsson, A comparison between Induction & Synchronous motors for applications in the Oil & Gas industry. Petroleum and Chemical Industry Technical Conference. PCIC 2008. 55th IEEE Cincinnati, OH, USA 22-24 Sept. 2008
http://dx.doi.org/10.1109/pcicon.2008.4663976

Zheng Ye, Ryan Semple, Saeed Rafie, Approach for Assessing Dormant Reliability in Dual Electrical Submersible Pump (ESP) Systems in High-pressure, High-temperature (HPHT) Environments. Proceedings of the Annual Offshore Technology Conference. 2015 May 04-07, Houston, Texas, USA, pp. 1–15.
http://dx.doi.org/10.4043/25925-ms

Sensorless Control [Online]. Avaliable at:
https://www.celeroton.com/en/technology/sensorless-control.html

BLDC Motor Control with Hall Sensors Based on FRDM-KE02Z [Online]. Avaliable at: https://www.nxp.com/docs/en/application-note/AN4776.pdf

H. Moradi Cheshmeh Beigi, Design, optimization and FEM analysis of a surface-mounted permanent-magnet brushless DC motor, International Journal of Engineering, Transactions B: Applications, vol. 31, n. 2, 2018, pp. 339–345.
http://dx.doi.org/10.5829/ije.2018.31.02b.19

B. M. Dinh, D. H. Linh, Electromagnetic and thermal calculation of surface mounted permanent magnet motor using finite element method, IEEE International Conference on Sustainable Energy Technologies, ICSET9, 2017, 7811809, pp. 355–358.
http://dx.doi.org/10.1109/icset.2016.7811809

P. Renaud, S. Louis, P. Damien, A. Miraoui, Design optimization method of BLDC motors within an industrial context, 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, United States, 2017 May 21-24; CFP17EMD-ART; 129783.
http://dx.doi.org/10.1109/iemdc.2017.8002263

A. Dwivedi, S. K. Singh, R. K. Srivastava, S. N. Mahendra, Comparative study and performance evaluation of analytical methods for surface mounted permanent magnet brushless motors IET Power Electronics, vol. 9, n. 11, 2016, pp. 2289–2297.
http://dx.doi.org/10.1049/iet-pel.2016.0179

H. Hao, J. Shen, C. Yuan, Q. Qu, Influences of machine structure on high speed PM BLDC motor, 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014, 2015, 7014063, pp. 3309–3312.
http://dx.doi.org/10.1109/icems.2014.7014063

P. Mukherjee, M. Sengupta, Design, analysis and fabrication of a brush-less DC motor, 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems, PEDES 2014, 7042056.
http://dx.doi.org/10.1109/pedes.2014.7042056

Ismagilov, F., Vavilov, V., Bekuzin, V., Ayguzina, V., High-Speed Magneto-Electric Slotless Generator, Integrated into Auxiliary Power Unit: Design and Experimental Research of a Scaled-Size Prototype, (2016) International Review of Aerospace Engineering (IREASE), 9 (5), pp. 173-179.
http://dx.doi.org/10.15866/irease.v9i5.10432

B. Abdi, J. Milimonfared, J. Moghani, Simplified Design and Optimization of Slotless Synchronous PM Machine for Micro-Satellite Electro-Mechanical Batteries, Advances in Electrical and Computer Engineering, vol. 9, n. 3, 2009, pp. 84–88.
http://dx.doi.org/10.4316/aece.2009.03015

A. Looser, T. Baumgartner, J. W. Kolar, C. Zwyssig, Analysis and Measurement of Three-Dimensional Torque and Forces for Slotless Permanent-Magnet Motors, IEEE Transactions on Industry Applications, vol. 48, n. 4, 2012, pp. 1258–1266.
http://dx.doi.org/10.1109/tia.2012.2199070

Jung-Moo Seo, Joo-Han Kim, In-Soung Jung, Hyun-Kyo Jung, Design and Analysis of Slotless Brushless DC Motor, IEEE Transactions on Industry Applications, vol. 47, n. 2, 2011, 11874567, pp. 730–735.
http://dx.doi.org/10.1109/tia.2010.2091611

P. Ragot, M. Markovic, Y. Perriard, Analytical determination of the phase inductances for a brushless dc motor with faulhaber winding, Proceedings of 42nd IEEE Industry Applications Society Annual Meeting (IAS ’07), 2007, pp. 1538–1543.
http://dx.doi.org/10.1109/07ias.2007.238

S. M. Jang, S. S. Jeong, D. W. Ryu, and S. K. Choi, Comparison of three types of PM brushless machines for an electro-mechanical battery, IEEE Transactions on Magnetics, vol. 36, n. 5, 2000, pp. 3540–3543.
http://dx.doi.org/10.1109/20.908892

Maxon DC motor. Permanent magnet DC motor with coreless winding [Online]. Available at:
https://www.maxonmotor.com/medias/sys_master/root/8803450421278/maxonDCmotor-Handouts.pdf?attachment=true

F. R. Ismagilov, V. Ye. Vavilov, N. G. Tarasov, V. V. Ayguzina, Minimization of Energy Losses in Ultra-High-Speed Electrical Rotating Machines, Elektrotehniški Vestnik, vol. 84, n. 1-2, 2017, pp. 56–60.

Ismagilov, F., Vavilov, V., Bekuzin, V., Ayguzina, V., Topology Evaluation of a Slotless High-Speed Electrical Machine with Stator Core Made of an Amorphous Alloy for the Aerospace Industry, (2017) International Review of Aerospace Engineering (IREASE), 10 (3), pp. 131-139.
http://dx.doi.org/10.15866/irease.v10i3.12615

D. K. Hong, D. S. Joo, B. C. Woo, Y. H. Jeong, D. H. Koo, Investigations on a Super High Speed Motor-Generator for Microturbine Application Using Amorphous Cores, IEEE Trans. Magn, vol. 49, 2013, pp. 4072–4075.
http://dx.doi.org/10.1109/tmag.2013.2239276

NPO “Introtest”, RE 4276.020.20872624.2009. [Online]. Availableat : http://www.introtest.com/.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize