Preliminary Comparative Study of Several Structures of Permanent-Magnet Synchronous Generator Used in Wind Energy System Optimization

Jacques Gbadebo Aredjodoun; Karimou Chabi-Sika; Sossou Houndedako; Christophe Espanet; Antoine Vianou

doi:10.15866/iree.v12i3.11347

Preliminary Comparative Study of Several Structures of Permanent-Magnet Synchronous Generator Used in Wind Energy System Optimization

Jacques Gbadebo Aredjodoun^(1*), Karimou Chabi-Sika⁽²⁾, Sossou Houndedako⁽³⁾, Christophe Espanet⁽⁴⁾, Antoine Vianou⁽⁵⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/iree.v12i3.11347

Abstract

This paper presents a preliminary comparative study of several structures of permanent- magnet synchronous generators used for wind energy system optimization. The present contribution is to demonstrate that an analytical approach can be used as preliminary mean for carrying out a quantitative comparison of several rotors structures. The method allows an optimal choice of the rotor topology considering the techno-economical aspect of the wind system. The air gap magnetic induction is expressed as a function of the geometrical dimensions of the machine and other electromagnetic properties. The analysis of the results obtained from the simulations with Matlab software, made it possible to compare and to classify according to their performance zone, the different structures of permanent magnets synchronous generators. The goal is to make an optimal choice of a rotor for existing stator to match each specific site requirement for wind energy.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords

Preliminary Comparative Study; Technological and Economical Optimization; PM Synchronous Generators in Wind System

Full Text:

PDF

References

Eriksson, Sandra; Bernhoff, Hans, “Rotor design for PM generators reflecting the unstable neodymium price” In: Electrical Machines (ICEM), 2012 XXth International Conference on Electrical Machines, 2012, pp. 1419-1423, ISBN: 978-1-4673-0143-5; 978-1-4673-0141-19/ICElMach.2012.6350064.
http://dx.doi.org/10.1109/icelmach.2012.6350064

S. Belakehal, H. Benalla and A.Bentuonsi“Power maximization control of small wind system using permanent magnet synchronous generator”, Revue des Energies Renouvelables, Vol. 12, N°2, Juin 2009, pp. 307-319.
http://dx.doi.org/10.1541/ieejpes.123.1573

Mayouf. Messaoud, Rachid.Abdessamed,‘‘Modeling and optimization of wind turbine driving permanent magnet synchronous generator’’, Jordan Journal of Mechanical and Industrial Engineering, Vol.5 N°6 Dec.2011, pp. 489-494.
http://dx.doi.org/10.1049/iet-tv.44.19487

D. Tran, B. Sareni, X.Roboam, C. Espanet “Integrated optimal design of a passive wind turbine system: An experimental validation”, 2010, IEEE Transactions on Sustainable Energy, Vol.1 (n°1). Pp.48-56. ISSN 1949-3029.
http://dx.doi.org/10.1109/tste.2010.2046685

A. Abdelli, B. Sareni, X. Roboam,“Optimization of a small passive wind turbine generator with multiobjective genetic algorithms”, International Journal of Applied Electromagnetics and Mechanics, 2007, Vol. 26, pp. 175-182.
http://dx.doi.org/10.1016/j.renene.2009.04.024

A. B. Proca, A. Keyhani, A. El-Antably, W. Lu and M. Dai, “Analytical model for permanent magnet motors with surface mounted magnets”, IEEE Transactions on energy conversion, Vol. 18, N°. 3, Sept. 2003.
http://dx.doi.org/10.1109/tec.2003.815829

N. Bracikowski, M. Rossi, M. Hecquet, F. Gillon“Multi-physics rules using lumped models for a permanent magnet synchronous machine”, International Journal of Applied Electromagnetics and Mechanics, 2013, Vol. 43(n° 1,2), pp. 13-23.
http://dx.doi.org/10.1109/iemdc.2011.5994863

F. Martin, A. Belahcen and M. El HadjiZaim“Impact of magnet losses on optimal design of a high speed synchronous machine”, 2014 International Conference on Electrical Machines (ICEM), Berlin, Germany, 2-5sept.2014.
http://dx.doi.org/10.1109/icelmach.2014.6960547

Figuerea J, Radaorozandry L., “Comparative analysis of surface mount PM motors structures for a traction application”, ICEM, 2006. Chania, Crete Island, Greece, 2-5 Sept. 2006
http://dx.doi.org/10.1109/isie.2006.295923

J. Gieras, E. Santini, and M. Wing, ‘’Calculation of synchronous reactance of small permanent magnet alternating-current motors: Comparison of analytical approach and finite element method with measurents’’, IEEE Trans on Magnetics, Vol.34, N°.5, Sept 1998.
http://dx.doi.org/10.1109/20.718533

D. Fodorean, M. Rura, L. Szabo, and A. Miraoui, “Comparisonof the main types of fault-tolerant electrical drives used in automobile applications”, Proc. Of the IEEE International Symposium on Power Electronics, Electrical Drives Automation and Motion-SPEEDAM’08, Ischia, Italy, pp. 895-900, 11-13 juin 2008.
http://dx.doi.org/10.1109/speedham.2008.4581328

K. Indirajith, R. Bharani Kumar“Analytical design of axial flux PMG for low speed direct drive wind applications”, International Journal of Electrical and Electronics Engineers, Vol. 9 issue 01, 2017.
http://dx.doi.org/10.1109/ias.2010.5615364

Miller T. J. E., and al“Performance estimation of interior permanent magnet brushless motors using the voltage driven flux MMF diagram”, IEEE Transactions on magnetics, vol. 42, 7, pp. 1867-1872, 2006.
http://dx.doi.org/10.1109/tmag.2006.874512

L Vido, Y. Amara, E. Hoang, M.Gabsi and M. Lecrivain“Comparison and design of interior permanent magnet synchronous machines for a hybrid vehicle application”, International Conference on Electrical Machines ICEM, CD Proceedings, September 2004.
http://dx.doi.org/10.1109/icelmach.2008.4799854

A. Arkkio, T. Jokinen, and E. Lanto, “Induction and permanent-magnet synchronous machines for high-speed applications”, In proceedings of the 8th International Conference on Electrical Machines and Systems, pages 871-876. ICEMS 2005, 2005.
http://dx.doi.org/10.1109/icems.2005.202668

Y. Chen, P. Pillay, A. Khan, “PM Wind Generator Comparison of Different Topologies”, 0-7803-8487-3/04/20.00 2004 IEEE.
http://dx.doi.org/10.1109/ias.2004.1348606

Cavallaro, C., Di Tommaso, A.O., Miceli, R., Raciti, A., Ricco Galluzzo, G., Trapanese, M., Analysis a DSP Implementation and Experimental Validation of a Loss Minimization Algorithm Applied to Permanent Magnet Synchronous Motor Drives, (2003) IECON Proceedings (Industrial Electronics Conference), 1, pp. 312-317.
http://dx.doi.org/10.1109/iecon.2003.1279998

Attaianese, C., Nardi, V., Tomasso, G., A self-commissioning algorithm for VSI-fed induction motors, (2002) IEEE Transactions on Power Electronics, 17 (6), pp. 1017-1023.
http://dx.doi.org/10.1109/tpel.2002.805599

Essalmi, A., Mahmoudi, H., Bennassar, A., Akherraz, M., Abbou, A., Genetic Algorithm Vector Control of Permanent Magnet Synchronous Motor based on Neuro Space Vector Modulation, (2014) International Review on Modelling and Simulations (IREMOS), 7 (3), pp. 436-443.

Pradeep, J., Devanathan, R., Fault Diagnosis of PMSM Using Artificial Neural Network, (2014) International Review on Modelling and Simulations (IREMOS), 7 (5), pp. 760-767.
http://dx.doi.org/10.15866/iremos.v7i5.3156

Refbacks

There are currently no refbacks.

Username
Password
Remember me