The Influence of Cross Edge Effect on Mechanical Characteristics of Electrodynamic Damping Element with Double Hollow Rotor

Marina Gumerova; Flur Ismagilov; Irek Khairullin; Viacheslav Vavilov; Oksana Yushkova; Rustam Gareev

doi:10.15866/iree.v11i4.8126

The Influence of Cross Edge Effect on Mechanical Characteristics of Electrodynamic Damping Element with Double Hollow Rotor

Marina Gumerova⁽¹⁾, Flur Ismagilov⁽²⁾, Irek Khairullin⁽³⁾, Viacheslav Vavilov^(4*), Oksana Yushkova⁽⁵⁾, Rustam Gareev⁽⁶⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/iree.v11i4.8126

Abstract

The steady-state of mathematical model of electromagnetic processes in the air gap of electrodynamic damping element with double hollow rotor (EDE DHR) are discussed. The influence on the mechanical characteristics of EDE DHR of cross edge effect is investigated.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords

Cross Edge Effect; Electrodynamic Damping Element; Double Hollow Rotor; Mechanical Characteristics; Electromagnetic Torque; Indirect Measurement

Full Text:

PDF

References

Yongdae Kim, Heon Lee, Semyung Wang, and Kyihwan Park. Design of a New Linear Magnetic Damper for Shock-Absorbing from Crash Accident of High Speed Vehicles. In: IEEE 2006 Electromagnetic Field Computation, 12th Biennial IEEE Conference; 30 April-3 May 2006; Miami, FL. New York, NY, USA: IEEE. pp. 35-37.
http://dx.doi.org/10.1109/cefc-06.2006.1633030

A. Looser, J. Kolar. An Active Magnetic Damper Concept for Stabilization of Gas Bearings in High-Speed Permanent-Magnet Machines. IEEE Transactions on Industrial Electronics 2014; 61; 6: 3089 –3098.
http://dx.doi.org/10.1109/tie.2013.2284152

V. Nguyen, J Delamare, J. P. Yonnet.. A passive damper for magnetic suspension. Magnetics, IEEE Transactions on 1994; 30; 6: 4794-4751.
http://dx.doi.org/10.1109/20.334210

M. Enokizono. T. Todaka, S. Nagata, E. Ishibashi. Dynamic finite element analysis of a magnetic damper system. Magnetics, IEEE Transactions on 1999; 35; 5: 3733-3735.
http://dx.doi.org/10.1109/20.800647

Lei Zuo, Xiaoming Chen, Samir Nayfeh. Design and Analysis of a New Type of Electromagnetic Damper With Increased Energy Density. Journal of Vibration and Acoustics 2011; 133:1–8.
http://dx.doi.org/10.1115/1.4003407

Zheng Shui-Ying, Pan Xiao-Hong, Ma Zhen-Fei. Studies on a passive electromagnetic damper. Journal Zhejiang Univ 2006; 7: 271-276.
http://dx.doi.org/10.1631/jzus.2006.as0271

Babak Ebrahimi Development of Hybrid Electromagnetic Dampers for Vehicle Suspension Systems. MSc, University of Waterloo, Ontario, Canada, 2009.

R. Ravaund, G. Lemarquand, V. Lemarquand, “Force and Stiffness of Passive Magnetic Bearings Using Permanent Magnets. Part 1: Axial Magnetization, “ IEEE Transctions on Magnetics. 2009. V.45 . I. 7. p.2996–3002.
http://dx.doi.org/10.1109/tmag.2009.2016088

R Ravaund, G. Lemarquand, V. Lemarquand, “Analytical Calculation of the Magnetic Field Created by Permanent–Magnet Rings,” IEEE Transctions on Magnetics. 2008. v.44. n. 8. p.1982–1989.
http://dx.doi.org/10.1109/tmag.2008.923096

Li W., Х. Zhang, S. Cheng, “Thermal Optimization for a HSPMG Used for Distributed Generation Systems,” IEEE Transactions on Industrial Electronics. 2013. Vol. 60 № 2. pp. 474–482.
http://dx.doi.org/10.1109/tie.2012.2187418

Rakotoarison,H.,J. Yonnet,and B. Delinchant,“Using coulombian approach for modelling scalar potential and magnetic field of a permanent magnet with radial polarization,” IEEE Trans. Magn.,Vol. 43,No. 4,1261–1264, Apr. 2007.
http://dx.doi.org/10.1109/tmag.2007.892316

Zhilichev,Y.,“Calculation of magnetic field of tubular permanent magnet assemblies in cylindrical bipolar coordinates,” IEEE Trans. Magn.,Vol. 43,No. 7,3189–3195,Jul. 2007.
http://dx.doi.org/10.1109/tmag.2007.894636

Lindell,I. V.,“Electromagnetic field in self-dual media in different-form representation,” Progress In Electromagnetics Research,PIER 58,319–333,2006.
http://dx.doi.org/10.2528/pier05072201

Azzerboni,B. and E. Cardelli,“Magnetic field evaluation for disk conductors,” IEEE Trans. Magn.,Vol. 29,No. 6,2419–2421,1993.
http://dx.doi.org/10.1109/20.280997

Xu,X. B. and L. Zeng,“ Ferromagnetic cylinders in earth’s magnetic field: A two-dimentional model of magnetization of submarine,” Progress In Electromagnetics Research,PIER 19, 319–335,1998.
http://dx.doi.org/10.2528/pier97120100

Babic,S. I. and C. Akyel,“ New mutual inductance calculation of the magnetically coupled coils: Thin disk coil-thin wall solenoid,” Journal of Electromagnetic Waves and Applications,Vol. 20, No. 10,1661–1669,2006.
http://dx.doi.org/10.1163/156939306779276794

Lemarquand ,G. and V. Lemarquand,“Annular magnet position sensor,” IEEE. Trans. Magn.,Vol. 26,No. 5,2041–2043,Sep. 1990.
http://dx.doi.org/10.1109/20.104612

Lemarquand,G. and V. Lemarquand,“Variable magnetic torque sensor,” J. Appl. Phys.,Vol. 70,No. 10,6630–6632,1991.
http://dx.doi.org/10.1063/1.349880

Pulyer,Y. and M. Hrovat,“Generation of remote homogeneous magnetic fields,” IEEE Trans. Magn.,Vol. 38,No. 3,1553–1563, May 2002.
http://dx.doi.org/10.1109/20.999131

Berkouk,M.,V. Lemarquand, and G. Lemarquand,“Analytical calculation of ironless loudspeaker motors,” IEEE Trans. Magn., Vol. 37,No. 2,1011–1014,Mar. 2001.
http://dx.doi.org/10.1109/20.917185

Abdi, B., Bahrami, H., Ghiasi, M.I., Ghasemi, R., PM machine optimization in variable speed EMB application, (2012) International Review of Electrical Engineering (IREE), 7 (3), pp. 4412-4418.

Li, Z., Magnetic field analysis of a novel deflection-type PM multi-DOF actuator, (2013) International Review of Electrical Engineering (IREE), 8 (1), pp. 89-95.

Liu, H., Hao, Y., Niu, S., Fu, W., Computation of Electromagnetic Losses in Double-Rotor Vernier PM Motors with Three Topologies Using TS-FEM, (2015) International Review of Electrical Engineering (IREE), 10 (1), pp. 22-27.
http://dx.doi.org/10.15866/iree.v10i1.4970

Sattorov R.R, F.R Ismagilov, Gumerova M.B. Mechanical characteristics of electromagnetic damping elements with double rotor. Herald SUSU 2010; 32 ( 208 ): 59-63 .

F. R. Ismagilov, R. R. Sattar. Electromagnetic processes in electromechanical damping elements. Elektrichestvo 2008; 10: 46-52.

L. A. Potapov, I. L. Simonov. Criterion for determining the maximum mechanical characteristics of electromechanical devices with hollow nonmagnetic rotors. Elektrichestvo 2010; 2: 47-50.

G. H. Tamoyan, I Khayrullin. Determination of power losses in the motor stator nonmagnetic screen. Elektrichestvo 1969; 6: 78 – 79.

Refbacks

There are currently no refbacks.

Username
Password
Remember me