Implementation of Power Operational Amplifier with Source-Sink Output Stage
(*) Corresponding author
DOI: https://doi.org/10.15866/iree.v10i2.5663
Abstract
The paper deals with the design and realization of the power operational amplifier. Its parameters are optimized for using in four-quadrant source, especially the frequency range, slew rate, wide range of output voltage, large output current, fast current limitation and low power losses. The power operational amplifier can find utilization in the output stage of the four-quadrant power supply, low-frequency amplifiers, supply sources of servomotors etc. Whole connection is divided into single blocks and they are described in detail. The experimental results that show important static and dynamic parameters of the realized power operational amplifier are presented in the paper.
Copyright © 2015 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
J. H. Huijsing, Operational amplifiers – Theory and design (Kluwer Academic Publishers, Boston, 2001).
http://dx.doi.org/10.1007/978-1-4757-3341-9
J. K. Roberge, K. H. Lundberg, Operational Amplifiers: Theory and Practice (Massachusetts Institute of Technology, 2007).
J. Puncochar, History and present of operational amplifiers (BEN, Prague, 2002).
Jafari, A., Artificial neural networks based approach for parametric optimization of CMOS operational amplifiers, (2011) International Review on Modelling and Simulations (IREMOS), 4 (4), pp. 2032-2037.
Lin, C.-H., The voltage control for PMSM direct-driven PMSG/battery renewable energy system using modified elman neural network, (2013) International Review of Electrical Engineering (IREE), 8 (2), pp. 654-662.
V. Sladecek, P.Palacky, P.Vaculik, J.Oplustil, Voltage Converters with Switched-capacitor, Progress in Electromagnetics Research Symposium (PIERS 2012), pp. 934-937, 2012, Kuala Lumpur, Malaysia.
P. Chlebis, P. Vaculik, P. Moravcik, Z. Pfof, Direct Torque Control Methods for Three-level Voltage Inverter, The 10th International Scientific Conference on Electric Power Engineering 2009, pp. 352-356, 2009, Kouty nad Desnou, Czech Republic.
W. M. Leach, Jr., The Leach amp, [online] available at: .
E. Arslan, Self-Biasing High Precision CMOS Current Subtractor for Current-Mode Circuits, Advances in Electrical and Computer Engineering, vol. 13, no. 4, 2013, pp. 19-24.T. Gucky et al., Measurement of integrated circuits (SNTL, Prague, 1977).
http://dx.doi.org/10.4316/aece.2013.04004
A. Chaziachmetovas, Driver Topology Influence on LED Luminescence Response Dynamics, Elektronika ir Elektrotechnika, vol. 20, no. 5, pp. 104-107.
http://dx.doi.org/10.5755/j01.eee.20.5.7061
Vlaicu, C., Florescu, A., Oancea, C.D., Radoi, C., Calibration system for electric energy quality measurement equipment, (2010) International Review of Electrical Engineering (IREE), 5 (5), pp. 2171-2176.
P. Spanik, J. Sedo, P. Drgona, M. Frivaldsky, Real Time Harmonic Analysis of Recuperative Current through Utilization of Digital Measuring Equipment, Elektronika ir Elektrotechnika, vol. 19, no. 5, 2013, pp. 33-38.
http://dx.doi.org/10.5755/j01.eee.19.5.4364
E. Yuce, S. Minaei, S. Tokat, Root-mean-square measurement of distinct voltage signals, IEEE Transactions on Instrumentation and Measurement, vol. 56, no. 6, 2007, pp. 2782-2787.
http://dx.doi.org/10.1109/tim.2007.908153
J. Mohylova and J. Puncochar, “Signal Flow Graph of the Transformer Model,” The 13th International Scientific Conference on Electric Power Engineering 2012, pp. 129-132, 2012, Brno, Czech Republic.
R. Majer, Design and realization of power operational amplifier, Diploma Thesis, VSB-Technical University of Ostrava, 2011.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize