Permanent Magnet Motor Design Optimisation for Sensorless Control
(*) Corresponding author
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
This paper looks at a novel optimisation approach to the design of surface mounted permanent magnet (SMPM) machines with self-sensing capabilities. A methodology will be presented which will look at the use of genetic algorithms (GA) to contemporarily maximise the output torque and the self sensing properties of such machines. A GA optimisation environment has been grafted with a finite element analysis (FEA) environment to enable the designer to account for both geometrical and saturation saliencies for an effective determination of the machine’s self sensing characteristics. Satisfactory results were obtained in terms of torque maximization and self sensing capability. Sensitivity of the major geometrical parameters of the machine will be discussed in terms torque density and the self-sensing and sensorless design and performance for high loading conditions will be considered
Copyright © Praise Worthy Prize - All rights reserved.
L. Harnefors, Instability Phenomena and Remedies in Sensorless Indirect Field Oriented Control, IEEE Transactions on Power Electronics, vol. 15 n. 4, pp. 733-743, July 2000.
Aymen, F., Sbita, L., Mouna, B.H., Online MRAS-PSO PMSM parameters estimation, (2011) International Review on Modelling and Simulations (IREMOS), 4 (3), pp. 980-987.
R.D. Lorenz, Future motor drive technology issues and their evolution, EPE-PEMC 2006, Slovenia.
J. I. Ha, M. Ohto, J. H. Jang, S. K. Sul, Design and selection of AC machines for saliency-based sensorless control, 37th IAS Annual Meeting 2002.
C.A. Silva, Sensorless vector control of surface mounted permanent magnet machines without restriction of zero frequency. Ph.D. dissertation, Dept. Elect. Eng., PEMC Group, University of Nottingham, 2003.
R. Wrobel, A.S. Budden, D. Salt, D. Holliday, P.H. Mellor, A. Dinu, P. Sangha, M. Holme, Rotor Design for Sensorless Position Estimation in Permanent-Magnet Machines, IEEE Transactions on Industrial Electronics, vol. 58 n. 9, September 2011, pp. 3815-3824.
N. Bianchi, S. Bolognani, M. Zigliotto, Design hints of an IPM synchronous motor for an effective position sensorless control, IEEE 36th Power Electronics Specialists Conference (PESC '05), June 16th, 2005.
A.S. Budden, R. Wrobel, D. Holliday, P.H. Mellor, A. Dinu, P. Sangha, M. Holme, Impact of rotor design on sensorless position estimation, 32nd Annual Conference on IEEE Industrial Electronics, IECON 2006.
R. Wrobel, A.S. Budden, D. Holliday, P.H. Mellor, P. Sangha, Design considerations for permanent magnet brushless machines for zero-speed sensorless position estimation, IEEE Industry Applications Conference, 41st IAS Annual Meeting, 2006.
N. Bianchi, S. Bolognani, Sensorless-Oriented Design of PM Motors, IEEE Transactions on Industry Applications, vol. 45 n. 4, July-Aug. 2009, pp. 1249 – 1257.
N. Bianchi, S. Bolognani, A. Faggion, Predicted and measured errors in estimating rotor position by signal injection for salient-pole PM synchronous motors, IEEE International Electric Machines and Drives Conference, IEMDC '09.
S-C. Yang, R.D. Lorenz, T. Suzuki, T.M. Jahns, Surface Permanent Magnet Synchronous Machine Design for Saliency-Tracking Self-Sensing Position Estimation At Zero and Low Speeds, IEEE Industry Applications, vol. 47 n. 5, 2011, pp. 2103-2116.
Besmi, M.R., Rezvani, S.M., Optimized structure design of interior permanent magnet motors for electric vehicles using a method based on FEM, (2011) International Review on Modelling and Simulations (IREMOS), 4 (4), pp. 1572-1577.
Mendaci, S., Mekideche, M.R., Allag, H., Analytical model of radial surface permanent magnet synchronous motor dedicated to optimal design, (2011) International Review on Modelling and Simulations (IREMOS), 4 (4), pp. 1542-1549.
Mirtalaei, S.M.M., Abdi, B., Shaloudegi, K., Ghasemi, R., Design and optimization of BLDC generator for wind turbine applications, (2012) International Review on Modelling and Simulations (IREMOS), 5 (2), pp. 899-904.
Tavana, N.R., Shoulaie, A., Performance improvement of linear permanent-magnet synchronous motor with Halbach array, (2009) International Review of Electrical Engineering (IREE), 4 (6), pp. 1210-1214.
S. Vaez-Zadeh and A.R. Ghasemi, Design Optimization of Permanent Magnet Synchronous Motors for High Torque Capability and Low Magnet Volume, Electric Power Systems Research, vol.74 n. 2, 2005, pp. 307–313.
W. Ouyang, D. Zarko, T.A. Lipo, Permanent magnet machine design practice and optimization, IEEE conference on Industrial Applications, 2006, Glasgow, UK.
N. Bianchi, S. Bolognani, Design optimisation of electric motors by genetic algorithms, IEE Proceedings: Electric Power Applications, vol. 145, Sept. 1998.
G. Pellegrino, F. Cupertino, FEA-based multi-objective optimization of IPM motor design including rotor losses, ECCE’10, Sept 12-16. 2010.
R. Wrobel, P.H. Mellor, Design Considerations of a Direct Drive Brushless Machine with Concentrated Windings, IEEE Transactions on Energy Conversion, vol. 23 n. 1, March 2008, pp. 655-658.
Y. Duan, R.G. Harley, T.G. Habetler, Comparison of particle swarm optimization and genetic algorithm in the design of permanent magnet motors, IPEMC’09, 2009.
R. Wrobel, P.H. Mellor, The use of a genetic algorithm in the design optimisation of a brushless DC permanent magnet machine rotor, Second International Conference on Power Electronics, Machines and Drives, (PEMD 2004).
M. Łukaniszyn, M. JagieŁa, R. Wróbel, Optimization of Permanent Magnet Shape for Minimum Cogging Torque Using a Genetic Algorithm, IEEE Transactions on Magnetics, vol.40 n. 2, part 2, 2004, pp. 1228 – 1231.
J. Arellano-Padilla, C. Gerada, G. Asher, M. Sumner, Inductance characteristics of PMSMs and their impact on saliency-based sensorless control, 14th Intl. Conf., EPE-PEMC 2010.
MAGNET. Infolytica Corporation.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2023 Praise Worthy Prize