Open Access Open Access  Restricted Access Subscription or Fee Access

Energy Generation from Footsteps Using Piezo-Electric Tiles


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irecon.v9i4.19956

Abstract


Piezoelectric generation and Dynamo generation can be used as means of converting waste energy into electrical energy, which can then be processed and used to run various gadgets. An Electric Harvesting Tile has been designed and constructed in this research. Mechanical stress has been applied on a Piezoelectric plate via walking/running. The different configurations of the Piezo-plates determine the electrical output. The configurations used in this study require twenty-four Piezo-plates, configured with four banks in parallel to each other. Each bank consists of six Piezo-plates connected in series. This configuration allows maximum energy to be generated since placing the four banks in parallel increases the current produced. The six Piezo-plates in each bank are configured in series since when piezoelectric plates are connected in series, the internal resistance will increase, and the voltage will be more stable. Using this configuration, a comparison has been made between the weight applied at the center and the external boundaries of the tile. It has been discovered that the voltage, the energy, the power, and the current have been higher for the weight applied at the center of the Tile. This increase can be attributed to the fact that applying force at the center ensures that an even force is applied to all the crystals, thereby producing higher voltage. Force applied to other sections indicates a lower voltage reading because the pressure is not applied to all the Piezo-plates, since their configuration includes four banks in parallel and each one consists of 6 Piezo-plates in series. Therefore, if pressure is not applied to one of Piezo-plates in series then the entire bank is open and no voltage is produced. It has been also discovered that the total voltage stored in the capacitor is the highest with the largest force applied since increasing the force increases the displacement of atoms, resulting in a higher voltage produced. The energy generated has been stored in a rechargeable battery, which has been used to power a mobile device.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Piezoelectric; Mechanical Stress; Electric Harvesting; Tile; Footsteps

Full Text:

PDF


References


Beeby, S. P., Tudor, M. J. and White, N. M. (2006) Energy harvesting vibration sources for microsystems applications, Measurement Science and Technology, vol. 17, no. 12, pp. R175-R195.
https://doi.org/10.1088/0957-0233/17/12/R01

Priya, S. (2007) Advances in energy harvesting using low profile piezoelectric transducers, Journal of Electro-ceramics, vol. 19, no. 1, pp. 165-182.
https://doi.org/10.1007/s10832-007-9043-4

Anton, S. R. and Sodano, H. A. (2007) A review of power harvesting using piezoelectric materials (2003-2006s), Smart Materials and Structures, vol. 16, no. 3, pp. R1-R21.
https://doi.org/10.1088/0964-1726/16/3/R01

Cook-Chennault, K. A., Thambi, N. and Sastry, A. M. (2008) Powering MEMS portable devices-a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems, Smart Materials and Structures, vol. 17, no. 4, Article ID 043001.
https://doi.org/10.1088/0964-1726/17/4/043001

He, M.; Wang, S.; Zhong, X.; Guan, M. (2019) Study of a Piezoelectric Energy Harvesting Floor Structure with Force Amplification Mechanism. Energies, 12, 3516.
https://doi.org/10.3390/en12183516

Zhang, Y.-H.; Lee, C.-H.; Zhang, X.-R. (2019) A novel piezoelectric power generator integrated with a compliant energy storage mechanism. J. Phys. D Appl. Phys. 2019, 52, 455501.
https://doi.org/10.1088/1361-6463/ab3605

Edlund, C.; Ramakrishnan, S. (2018) An analytic study of vibrational energy harvesting using piezoelectric tiles in stairways subjected to human traffic. Eur. J. Appl. Math. 30, 968-985.
https://doi.org/10.1017/S095679251800058X

Cho, J.Y.; Kim, K.-B.; Hwang, W.S.; Yang, C.H.; Ahn, J.H.; Hong, S.D.; Sung, T.H. (2019) A multifunctional road-compatible piezoelectric energy harvester for autonomous driver-assist LED indicators with a self-monitoring system. Appl. Energy, 242, 294-301.
https://doi.org/10.1016/j.apenergy.2019.03.075

Petrov, R., Nikitin, A., Bichurin, M., Srinivasan, G., Magnetoelectric Antenna Array, (2020) International Journal on Communications Antenna and Propagation (IRECAP), 10 (6), pp. 371-376.
https://doi.org/10.15866/irecap.v10i6.18658

Kim, Heung Soo; Kim, Joo-Hyong and Jaehwan Kim. (2011). 'A Review of Piezoelectric Energy Harvesting Based on Vibration', International Journal of Precision Engineering and Manufacturing, 12 (06), 1129-1141.
https://doi.org/10.1007/s12541-011-0151-3

Zhu D, Almusallam A, Beeby S, Tudor J, White N and Harris N (2010) A bimorph multilayer piezoelectric vibration energy harvester. At PowerMEMS 2010, Leuven, Belgium, 01-03 Dec 2010.

Raja S and Ikeda T (2008) Concept and Electro-Elastic Modeling of Shear Actuated Fiber Composite using Micro-Mechanics Approach. Journal of Intelligent Material Systems and Structures 19: 1173-1183.
https://doi.org/10.1177/1045389X07084177

Lefeuvre E, Badel A, Benayad A, Lebrun L, Richard C and Guyomar D (2005) A comparison between several approaches of piezoelectric energy harvesting. Journal of Physique Coll 128: 177-186.
https://doi.org/10.1051/jp4:2005128027

Kenji Uchino and Gómez Muñoz, C. Q., Zamacola Alcalde, G., & García Márquez, F. P. (2020). Analysis and Comparison of Macro Fiber Composites and Lead Zirconate Titanate (PZT) Discs for an Energy Harvesting Floor. Applied Sciences, 10(17), 5951.
https://doi.org/10.3390/app10175951

Shin D-J, Kang W-S, Koh J-H, Cho K-H, Seo C-E, and Lee S-K (2014) Comparative study between the pillarand bulk-type multilayer structures for piezoelectric energy harvesters. Phys. Status Solidi A 211: 18121817.
https://doi.org/10.1002/pssa.201330505

Rödel, J.; Webber, K.G.; Dittmer, R.; Jo, W.; Kimura, M.; Damjanovic, D. (2015) Transferring lead-free piezoelectric ceramics into application. J. Eur. Ceram. Soc. 35, 1659-1681.
https://doi.org/10.1016/j.jeurceramsoc.2014.12.013

Maamer, B.; Boughamoura, A.; El-Bab, A.M.F.; Francis, L.A.; Tounsi, F. A (2019) review on design improvements and techniques for mechanical energy harvesting using piezoelectric and electromagnetic schemes. Energy Convers. Manag. 199, 111973.
https://doi.org/10.1016/j.enconman.2019.111973

Piliposian, G.; Hasanyan, A.; Piliposyan, D. (2019) The effect of the location of piezoelectric patches on the sensing, actuating and energy harvesting properties of a composite plate. J. Phys. D Appl. Phys. 52, 445501.
https://doi.org/10.1088/1361-6463/ab37be

Yoon, S.; Shin, D.-J.; Ko, Y.-H.; Cho, K.-H.; Koh, J.-H. (2019) Flexible Energy Harvester Based on Poly (vinylidene fluoride) Composite Films. J. Nanosci. Nanotechnol. 19, 1289-1294
https://doi.org/10.1166/jnn.2019.16180

Mishra, S.; Unnikrishnan, L.; Nayak, S.K.; Mohanty, S. (2018) Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A Systematic Review. Macromol. Mater. Eng. 2018, 304, 1800463.
https://doi.org/10.1002/mame.201800463

Sappati, K.; Bhadra, S. Piezoelectric Polymer and Paper Substrates: A Review. Sensors. 18, 3605.
https://doi.org/10.3390/s18113605

Kumar, A. (2011). Electrical Power Generation Using Piezoelectric Crystal. Accessed October 14, 2019.
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.301.2140&rep=rep1&type=pdf

Sujatmiko, T. (2014) Volcanic Ash Turned into an Art Sculpture, Kedaulatan Rakyat, 20 February. Available from:
http://krjogja.com/read/205629/abu-vulkanik-disulap-jadi-patung-seni.kr

Pramethesth, T and Ankur, S. (2013) Piezoelectric Crystals: Future Source of Electricity, International Journal of Scientific Engineering and Technology, 2 (4), 260-262. [Accessed 26 February 2014] Available from: http://ijset.com/ijset/publication/v2s4/paper15.pdf

Kalyanaraman, K and Babu, J. (2010). Power Harvesting System in Mobile Phones and Laptops using Piezoelectric Charge Generation. Accessed October 14, 2019.
https://pdfs.semanticscholar.org/b38f/d313298cb7386a0d81e9ee57b8ec59721d25.pdf

Babu, A.S; Joseph, D; Harikrishnan, G. and Raj, S. M. (2019). Foot Step Power Generation-Power Generating Slabs, International Journal of Engineering Science Invention, Vol. 8, No. 6, 4-10.

Livingston, J. J. and Hemalatha, M. (2011). Charging an Electronic Gadget using Piezoelectricity. Accessed October 21, 2019.
https://pdfs.semanticscholar.org/778b/03446e34f5b116b006eb069f5b02e8a892df.pdf

Mendoza Casseres, D., Valencia, G., Duarte Forero, J., In-Cylinder Pressure Signal Processing Applied to the Diagnosis of Combustion in Low Displacement Diesel Engine, (2020) International Journal on Communications Antenna and Propagation (IRECAP), 10 (2), pp. 137-144.
https://doi.org/10.15866/irecap.v10i2.18640


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize