Comparison of Three-Phase Induction Motor Control Models Incorporating Mutual Flux Saturation Effect
(*) Corresponding author
Two different field oriented control (FOC) – schematics are deployed to control a three phase induction motor represented by two of its different respective models. The first case incorporates a microprocessor-based discrete time operation, unlike the second case which involves continuous time operation. The flux saturation effect implied by the magnetizing inductance is studied and compared for validation purposes in both cases, where each case depicts the effect of flux saturation differently, yielding the time varying speed and torque outputs. The persistence of saturation effect is found evident in both cases, however, its implications differ due to the different parameters, different FOC schemes, different driving techniques, and different saturation depictions. Results obtained ensure that if the flux saturation took place, there will exist performance oscillations and slight temporary deviations from desired values regarding required speed and torque of the induction motor. Performance and operation during a three-phase fault occurring on the supply voltage was studied with both the inclusion and exclusion of the saturation effect. The same effects were then analyzed provided that the induction motor is realized as a double-cage rotor induction motor, instead of the squirrel cage one.
Copyright © 2017 Praise Worthy Prize - All rights reserved.
Popescu M., "Induction Motor Modelling for Vector Control Purposes", Helsinki University of Technology, Laboratory of Electromechanics, Report, Espoo 2000, 144 p.
Texas Instruments Europe, "Field oriented control of 3-phase AC motors", Report, Literature Number BPRA073, February 1998.
Ong C. M., "Dynamic Simulation of Electric Machinery using Matlab/ Simulink", textbook, School of electrical & computer engineering, Purdue University, pp 202-204.
Qu Z., Ranta M., Hinkkanen M., and Luomi J., "Loss-Minimizing flux level control of induction motor drives", IEEE Transactions on industry applications, Vol. 48, No.3, May/June 2012, pp. 952-961.
Donescu V., Charette A., Yao Z., and Rajagopalan V., "Modeling and simulation of saturated induction motors in phase quantities", IEEE Transactions on energy conversion, Vol.14, No.3, September 1999, pp. 386-393.
Huang M. S., and Liaw C. M., "Transient performance improvement control for IFO induction motor drive in field-weakening region", IEE proceedings on Electric power applications, Vol.150, No.5, September 2003, pp.521-530.
Reynauld J., and Pillay P., "Modeling of saturation effects in the magnetizing branch of an induction motor using PSpice", Proceedings of IEEE Southeastcon '92 Conference, April 1992, pp.513-516.
Hinkkanen M., Repo A .K., Ranta M., and Luomi J., "Small-signal modeling of mutual saturation in induction machines", IEEE Transactions on industry applications, Vol. 46, No. 3, May/June 2010, pp.965-973.
Tuovinen T., Hinkkanen M., and Luomi J., "Modeling of saturation due to main and leakage flux interaction in induction machines", IEEE Transactions on industry applications, Vol. 46, No. 3, May/June 2010, pp.937-945.
Zhao L., Huang J., Chen J., and Ye M., "A parallel speed and rotor time constant identification scheme for indirect filed oriented induction motor drives", IEEE Transactions on power electronics, Vol. 31, No. 9, September 2016, pp.6494-6503.
Shuqiu G., and Zhongli L., "Induction motor vector control based on adaptive identification of rotor resistance", Proceedings of IEEE international conference on control engineering and communication technology, December 2012, pp.145-148.
Accetta A., Alonge F., Cirrincione M., Pucci M., and Sferlazza A., "Feedback Linearizing control of induction motor considering Magnetic saturation effects", IEEE Transactions on industry applications, Vol. 52, No. 6, November-December 2016, pp.4843-4854.
Kiselychnyk O., Bodson M., and Wang J., "Comparison of two magnetic saturation models of induction machines and experimental validation", IEEE Transactions on industrial electronics, Vol. 64, No. 1, January 2017, pp.81-90.
Smith A. C., Healey R. C., and Williamson S., "A transient induction motor model including saturation and deep bar effect", IEEE Transactions on energy conversion, Vol. 11, No. 1, March 1996, pp.8-15.
Run-hao P., Haisen Z., Dongdong Z., and Jiaxuan L., "Analytical method for starting performance calculation of induction motors considering skin effect and leakage flux saturation", IEEE proceedings of 17th international conference on electrical machines and systems, October 2014, pp.135-138.
Lorenz R., and Novotny D.W., "Saturation effects in field-oriented induction machines", IEEE Transactions on industry applications, Vol. 26, No. 2, March/April 1990, pp.283-289.
Martinez J., Belahcen A., Arkkio A., "3D permeance model of induction machines taking into account saturation effects and its connection with stator current and shaft speed spectra", IET electric power applications, Vol. 9, No. 1, January 2015, pp.20-29.
Preston T. W., Reece A. B. J., and Sangha P. S., "Induction motor analysis by time-stepping techniques", IEEE Transactions on Machines, Vol. 24, No. 1, January 1988, pp.471-474.
Arkkio A., "Finite element analysis of cage induction motors fed by static frequency converters", IEEE Transactions on magnetics, Vol. 26, No. 2, March 1990, pp.551-554.
Campeanu A., Radulescu M., Vlad I., and Enache S., "influence of cross-saturation for modeling and simulation of the dynamic processes in the induction motor", proceedings of IEEE EUROCON international conference on 'computer as a tool', September 2007, pp.1830-1833.
Wallscheid O., Meyer M., and Bőcker J., "An open-loop operation strategy for induction motors considering iron losses and saturation effects in automotive applications", Proceedings of IEEE 11th international conference on power electronics and drive systems, June 2015, pp.981-985.
Boglietti A., Cavagnino A., and Lazzari M., "Computational algorithms for induction-motor equivalent circuit parameter determination- part I: resistances and leakage reactances", IEEE Transactions on industrial electronics, Vol. 58, No. 9, September 2011, pp.3723-3733.
Ouadi H., Giri F., and Dugard L., "Accounting for magnetic saturation in induction machines modelling", International Journal of Modelling, Identification, and Control, Vol. 14, issue 1-2, December 2011, pp.27-36.
Wang K., Yao W., Chen B., Shen G., Lee K., and Lu Z., "Magnetizing - curve identification for induction motors at standstill without assumption of analytical curve functions", IEEE Transactions on industrial electronics, Vol. 62, No. 4, April 2015, pp.2144-2155.
Therrien F., Wang L., Chapariha M., and Jatskevich J., "constant – parameter interfacing of induction machine models considering main flux saturation in EMTP-type programs", IEEE Transactions on energy conversion, Vol. 31, No. 1, March 2016, pp.12-26.
Monjo L., Cơrcoles F., and Pedra J., "Saturation effects on torque - and current -slip curves of squirrel – cage induction motors", IEEE Transactions on energy conversion, Vol. 28, No. 1, March 2013, pp.243- 254.
El-Faouri F. S., Mohamed O., and Elhaija W. A., “D-Q model and control of a three-phase induction motor considering mutual flux saturation effect”, Proceedings of 10th Jordanian international electrical and electronics engineering conference, May 2017, Amman, Jordan.
Liu L., Du X., and Shen S., “Indirect field-oriented torque control of induction motor considering magnetic saturation effect: error analysis”, IET electric power application, Vol. 11, No. 6, July 2017, pp. 1105-1113.
Ljušev P., Štumberger G., and Dolinar D., “Rotor flux linkage oriented control of induction motor with included magnetic saturation”, IEE proceedings- Electric power applications, Vol. 152, No. 1, January 2005, pp.112-118.
Faiz J., Ebrahimi B. H., and Toliyat H. A., “Effect of magnetic saturation on static and mixed eccentricity fault diagnosis in induction motor”, IEEE Transactions on magnetics, Vol. 45, No. 8, August 2009, pp. 3137-3144.
Sprooten J., and Maun J. C., “influence of saturation level on the effect of broken bars in induction motors using fundamental electromagnetic laws and finite element simulations”, IEEE Transactions on energy conversion, Vol. 24, No. 3, September 2009, pp.557-564.
Tenhunen A., Holopainen T. P., and Arkkio A., “Effects of saturation on the forces in induction motors with whirling cage rotor”, IEEE Transactions on magnetics, Vol. 40, No. 2, March 2004, pp.766-769.
Holtz J., and Pan H., “elimination of saturation effects in sensorless position controlled induction motors”, IEEE Transactions on industry applications, Vol. 40, No. 2, March/April 2004, pp.623-631.
Mathworks, Simulink Real-time. Retrieved from Matlab Simulink.
Ramdasi, S., Senthil Kumar, A., Thipse, S., Marathe, N., Development of DTC for Induction Motor Fed with Multilevel Inverter & Improved PWM Control Strategy to Maximise Energy Efficiency in EV/HEV/FCV, (2015) International Review of Electrical Engineering (IREE), 10 (4), pp. 477-491.
Essalmi, A., Mahmoudi, H., Bennassar, A., Abbou, A., Zahraoui, Y., Akherraz, M., Real Time Implementation of Sliding Mode Control for Induction Motor Drives Using dSPACE, (2015) International Review of Electrical Engineering (IREE), 10 (1), pp. 36-41.
Benmiloud, T., Improved Adaptive Flux Observer of an Induction Motor with Fast Lyapunov Optimization Method, (2014) International Review of Electrical Engineering (IREE), 9 (2), pp. 300-306.
Chacko, S., Bhende, C., Jain, S., Nema, R., Model Reference Adaptive Controller Based Rotor Resistance Estimation for Vector Controlled Induction Motor Drive Using Artificial Intelligence, (2015) International Review on Modelling and Simulations (IREMOS), 8 (4), pp. 418-426.
Sen, T., Bansal, H., Dynamic Modelling and Fault Diagnosis of an Induction Motor, (2014) International Review on Modelling and Simulations (IREMOS), 7 (4), pp. 575-583.
Othmani, H., Sassi, F., Mezghani, D., Mami, A., Comparative Study between Fuzzy Logic Control and Sliding Mode Control for Optimizing the Speed Deportment of a Three Phase Induction Motor, (2016) International Review of Automatic Control (IREACO), 9 (3), pp. 175-181.
Utrata, G., Rolek, J., Kaplon, A., The Genetic Algorithm for an Electromagnetic Parameters Estimation of an Induction Motor Secondary Multi-Loop Equivalent Circuit, (2014) International Review of Electrical Engineering (IREE), 9 (6), pp. 1111-1118.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2023 Praise Worthy Prize