Research on Battery Cell Thermal Characteristics


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


The battery cell is simplified in this paper, and the material properties of the components and thermal sources in the cell are investigated accordingly. The correctness and practicability of simplified model are validated by experimental data, and the results indicate that the error between simulated data and experimental data is within 10% in full range of charge and discharge process. The influence of discharge rate, environment temperature, radiation and contact resistance are analyzed accordingly, and the results indicate that higher discharge rate will result in higher temperature, and higher environment temperature will result in higher final charge or discharge temperature. If the discharge rate is low, the effect of radiation on battery thermal characteristics will below 1.5°C. The influence of contact resistance on temperature variation is significant, and the maximum temperature inside the battery cell can increase 39.03°C with 5C discharge rate comparing with that without considering the contact thermal resistance
Copyright © 2015 Praise Worthy Prize - All rights reserved.

Keywords


Battery Cell; Thermal Characteristic; Experiment Verification; Numerical Simulation

Full Text:

PDF


References


D BERNARDI, E PAWLIKOWSKI, J NEWMAN. A general energy balance for battery Systems, Journal of the Electrochemical Society132(1) (1985)5–12．

SATO N. Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles, Journal of Power Sources,99 (2001)70–77.
http://dx.doi.org/10.1016/s0378-7753(01)00478-5

V.JOHNSON. Battery performance models in ADVISOR110 (2) (2002) 321–329.
http://dx.doi.org/10.1016/s0378-7753(02)00194-5

SMITH K, WANG C Y. Power and thermal characterization of a lithium-ion battery Pack for hybrid-electric vehicles, Journal of Power Source 160(2006)662–673.
http://dx.doi.org/10.1016/j.jpowsour.2006.01.038

YUE MA, HO TENG, MARINA THELLIEZ. Electro-Thermal Modeling of a Lithium-ion Battery System, SAE International (2010) 2204–2205.
http://dx.doi.org/10.4271/2010-01-2204

DONG HYUP JEON, SEUNG MAN BAEK. Thermal modeling of cylindrical lithium Ion battery during discharge cycle, Energy Conversion and Management 52(2011)2973–2981.
http://dx.doi.org/10.1016/j.enconman.2011.04.013

Che Dulan. Thermal characteristics research and optimization design of Electric vehicle lithium-ion battery pack. Wu Han University of technology, Wu Han, 2009.

Li Chengtao, Li Tang, Chen Shiquan. Analysis of the heat dissipation capability influence factors of LiMn2O4 based Lithium-ion power battery, ACTA ARMAMENTARII31 (1) (2010)88–93.

Fang Peimin. New type of LiFePO4 power battery, Electronic Products China 9(2007)95–98.

Kathryn Striebel. The development of low cost LiFePO4-based high power lithium-ion batteries, Journal of Power Sources146(1-2)(2005)33-38.
http://dx.doi.org/10.1016/j.jpowsour.2005.03.119

K. Zaghib. An improved high-power battery with increased thermal operating range: C–LiFePO4//C–Li4Ti5O12,Journal of Power Sources 216(2012)192-200.
http://dx.doi.org/10.1016/j.jpowsour.2012.05.025

Sergio Brutti. A high power Sn–C/C–LiFePO4 lithium ion battery, Journal of Power Sources217(2012)72-76.
http://dx.doi.org/10.1016/j.jpowsour.2012.05.102

Ren Baofu. The study on thermal characteristics of the charge/discharge process in high capacity Li-ion power batteries. Beijing Jiao tong University, Bei Jing, 2012.

Jens Groot. On the complex ageing characteristics of high-power LiFePO4/graphite battery cells cycled with high charge and discharge currents, Journal of Power Sources286(2015)475-487.
http://dx.doi.org/10.1016/j.jpowsour.2015.04.001

Fei Chaohui, Wang Xuelin, Ling Ling. Thermal analysis of Lithium-ion power battery pack based on CFD, Machinery & Electronics 7(2012)13–16.

Zhonghao Rao. Simulation and experiment of thermal energy management with phase change material for ageing LiFePO4 power battery, Energy Conversion and Management52(12)(2011)3408-3414.
http://dx.doi.org/10.1016/j.enconman.2011.07.009

Zhang Bin, Lin Chengtao, Chen Shiquan. Performance of LiFePO4 /C Li-ion battery for electric vehicle, Journal of Power Sources 32 (2) (2008)95–98.

C.-W. PARK, A.K. JAURA, Dynamic thermal model of Li-ion battery for predictive behavior in hybrid and fuel cell vehicles, SAE(2003)2286-2287.
http://dx.doi.org/10.4271/2003-01-2286

Li Zhe, Han Xuebing, Lu Languang. Temperature characteristics of power LiFePO4 batteries, JOURNAL OF MECHANICAL ENGINEERING, 47(18) (2011)115–120.
http://dx.doi.org/10.3901/jme.2011.18.115

P.G.Balakrishnan.Safety mechanisms in lithium-ion batteries, Journal of power sources155(2)(2006)401-414.
http://dx.doi.org/10.1016/j.jpowsour.2005.12.002

Wu Kan, Zhang Yao, Zeng Shuqun. Safety performance of lithium-ion battery, PROGRESS IN CHEMISTRY 23(2/3) (2011)401–408.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize