Modeling and Parameter Identification of a Synchronous Machine by Using Singular Perturbation Approach

Mourad Hasni; Omar Touhami; Rachid Ibtiouen; M. Fadel

doi:10.15866/irecon.v5i2.11977

Modeling and Parameter Identification of a Synchronous Machine by Using Singular Perturbation Approach

Mourad Hasni^(1*), Omar Touhami⁽²⁾, Rachid Ibtiouen⁽³⁾, M. Fadel⁽⁴⁾

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/irecon.v5i2.11977

Abstract

In this paper a salient-pole synchronous machine is modeled by an approach of singular perturbations. Experimental determination of synchronous machine parameters is proposed. Frequency response characteristics are plotted in the Gaussian plane to show the transient and sub-transient dynamics. The operational reactances calculated from the global model are compared to those obtained from the reduced model.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords

Classical and Standstill Tests; Frequency Response Characteristics; Singular Perturbation; Synchronous Machine

Full Text:

PDF

References

S. H. Minnich, M.V.K. Chari, and J.F. Bekery. Operational inductances of turbine generators by the finite-element method. IEEE Trans. On Power Apparatus and Systems, vol.PAS-102, n°1, pp.20-27, 1983
http://dx.doi.org/10.1109/tpas.1983.317993

I. Kamwa, P. Viarouge, R. Mahfoudi, Phenomenogical models of large synchronous machines from short-circuit tests during commissioning – a classical/modern approach, IEEE Transaction on Energy Conversion, Vol.9, N°1, March 1994, pp. 85- 97

E.C Bortoni, J. A. Jardini, A Standstill frequency response method for large salient pole synchronous machines, IEEE Trans On Energy Conversion, Vol 19, N°4, pp687_691, December 2004
http://dx.doi.org/10.1109/tec.2004.832047

O. Touhami, H. Guesbaoui, and C. Iung. Synchronous machine parameter identification by a multi-time scale technique. IEEE Trans. On Industry Applications, vol.30, n°6, pp.1900-1908, 1994
http://dx.doi.org/10.1109/ias.1992.244297

Nele Dedene, Rik Pintelon and Philipe Lataire. Estimation of a global synchronous machine model using a multiple input multiple output estimators. IEEE Trans. On Energy conversion, vol.18, n°1, pp.11-16, Feb.2003
http://dx.doi.org/10.1109/tec.2002.805198

S. Ahmed-Zaïd, P.W. Sauer, M.A. PAI, and M.K. Sarioglu. Reduced order modeling of synchronous machine using singular perturbation. IEEE Trans. On Circuits and Systems, vol.CAS-29, n°11, pp.782-786, 1982
http://dx.doi.org/10.1109/tcs.1982.1085101

L.F. Lopez and H.A Nour-Eldin. Modelling and model reduction of the synchronous machine through singular perturbation. Proc. of the Conf. Modelling & Simulation of Electrical Machines & converters. Belgium, pp.141-149, 1984
http://dx.doi.org/10.1109/icelmach.2008.4799886

P.W. Sauer, S. Ahmed-Zaïd and P.V. Kokotovic. An integral manifold approach to reduced-order dynamic modeling of synchronous machines. IEEE Trans. On Power System, vol.3, n°1, pp.17-23, Feb.1988

P.W. Sauer, and P.V. Kokotovic. Integral manifolds as a tool for reduced-order modeling of a nonlinear system: A synchronous machine case study. IEEE Trans. On Circuits and Systems, vol.36, n°3, pp.403-410, March 1989

X. Xu, R.M. Mathur, J. Jiang, G.J. Rogers, and P. Kundur. Modeling of generators and their control in Power system simulations using singular perturbation. IEEE Trans. On Power Systems, vol.13, n°1, pp.109-114, Feb.1998

S.D. Pekarek, M.T. Lemanski and Eric A. Walters. On the use of singular perturbations to neglect the dynamic saliency of synchronous machine. IEEE Trans. On Energy Conversion, vol.17, n°3, pp.385-391, Sep.2002
http://dx.doi.org/10.1109/tec.2002.801988

EPRI Report. Confirmation of test methods for synchronous machine dynamic performance models. EPRI EL-5736, Project 2328-1, final report, 1987

IEC.34-4. Standard on rotating electrical machines: Part 4: Methods for determining synchronous machine quantities from tests. IEC Publication 24-4, 1985.

ANSI-IEEE Std.115. Test procedures for synchronous machines, Part.I-Acceptance and performance testing. Part.II-Test procedures and parameter determination for dynamic analysis. Approved, Dec.1995

IEEE Task force on definition (P.L. Dandeno, Chairman). Current usage & suggested practices in power system stability simulations for synchronous machines. IEEE Trans. On Energy Conversion, vol.EC-1, n°1, pp.77-93, 1980
http://dx.doi.org/10.1109/tec.1986.4765673

I.M. Canay. Determination of the model parameters of machines from the reactances operators Xd (p), Xq(p) (evaluation of standstill frequency response test). IEEE Trans. On Energy Conversion, vol.8, pp.272-279, June 1993

Refbacks

There are currently no refbacks.

Username
Password
Remember me