Issue | Title | |
Vol 6, No 1 (2014) | Spectroscopic Studies on the Degradation of Methylene Blue by Using TiO2 and TiO2 - (x) ZnFe2O4 | Abstract |
Violeta Dimitrova Kassabova-Zhetcheva, Lilyana Parvanova Pavlova | ||
Vol 14, No 1 (2022) | Spreadsheet Calculation of Energy Based Method to Predict Temperature in Concrete Slabs | Abstract |
P. Panedpojaman | ||
Vol 5, No 3 (2013) | Stereoscopic Particle Image Velocimetry Analysis of Air-Water Flow in a Pipe Separator | Abstract |
Eyitayo A. Afolabi, J. G. M. Lee | ||
Vol 5, No 3 (2013) | Strain and Stress Analysis of Vacuum Chamber | Abstract |
S. Boutabba, A. Chettah, A. Boukercha | ||
Vol 15, No 1 (2023) | Strength and Durability of High Performance Concrete Using Local Materials | Abstract |
I. Gumidi, Y. Abdelaziz, T. Rikioui | ||
Vol 8, No 6 (2016) | Structural and Magnetic Study of a Metal Excess Spinel: Cu1.15Cr1.15Zr0.85Se4 | Abstract |
K. Belakroum, Z. Ouili, P. Molinié, A. Leblanc-Soreau | ||
Vol 6, No 4 (2014) | Studies on Performance Characteristics of Diverging – Converging Fluidized Bed Biofilm Reactor with Special Reference to Lactic Acid Synthesis from Molasses and Cheese Whey | Abstract |
C. M. Narayanan, Ananya Basak, Arpita Saha, Soni Jha | ||
Vol 8, No 6 (2016) | Study of Reticulation RTM6 System by DSC and FTIR Spectroscopy | Abstract |
L. Merad, M. Cochez, F. Jochem, M. Ferriol, P. Bourson, B. Benyoucef | ||
Vol 7, No 2 (2015) | Study of the Influence Mode of Polishing on the Tribological Parameters and Surface Quality of Nonallied Steels | Abstract |
A. Elazzizi, A. Belalia, A. Benamar, A. Maghraoui | ||
Vol 7, No 3 (2015) | Surface Effect on Ions Distributions in Nanoporous Media, a Molecular Dynamics Study | Abstract |
Jalal Dweik, Mahmoud Srour, Mohamad Tawbe, Khalil Abou-Saleh | ||
Vol 8, No 5 (2016) | Swelling of Poly (Acrylates) Interpenetrating Polymer Networks in Isotropic Solvents | Abstract |
Kamel Eddine Boudraa, Tewfik Bouchaour, Ulrich Maschke | ||
Vol 7, No 4 (2015) | Synthesis of Proton Exchange Membranes from Natural Rubber | Abstract |
Alvaro Realpe, Karen Barrios, María T. Acevedo | ||
Vol 7, No 4 (2015) | Synthesis of Proton Exchange Membranes from Vinyl Acetate and Acrylic Ester for Fuel Cell | Abstract |
Alvaro Realpe, Nayilis Mendez, María T. Acevedo | ||
Vol 6, No 6 (2014) | The Combined Effects of Piezoresistance Coefficient π44 and Temperature Coefficients (α and β) in Resistive Behaviour of Silicon Type P | Abstract |
M. Ras Lain, A. Chaabi | ||
Vol 9, No 2 (2017) | The Effect of Elaboration Process on the Wear Behaviour of Leaded Brass | Abstract |
R. Elleuch, N. Bouzayani | ||
Vol 7, No 5 (2015) | The Effect of Microstructure Size on Bar Cross-Sectional Area Changes in Elastic Tensile Deformation | Abstract |
Olufemi T. Akintayo | ||
Vol 6, No 3 (2014) | The Influence of Hydrogen and Chromium on Behavior Mechanic of the Welded Joints | Abstract |
A. Aboura, A. Seddak, A. Hebbar | ||
Vol 15, No 1 (2023) | The Material Consumption of the Wastewater Treatment Infrastructure in China: an Index Decomposition Analysis | Abstract |
Wanxin Hou, Hiroki Tanikawa | ||
Vol 14, No 1 (2022) | The Stability of Ecosystems and Paradox of Enrichment via Spatial Prey-Predator Distributions with Active Dispersal | Abstract |
Tri Nguyen-Quang | ||
Vol 5, No 3 (2013) | The Surface Morphology, Mechanical Characteristics and Corrosion Resistance of Plasma Sprayed Titanium Dioxide Nanostructured Coatings | Abstract |
Z. Ahmad, M. Ahsan | ||
Vol 8, No 1 (2016) | The Vigorous Bubbling Step in the Potato Immersion Frying Process: Influence of a Previous Water Thermal Treatment | Abstract |
Luis T. Villa, Ricardo F. Lozano, Maria del Socorro Vilte | ||
Vol 11, No 1 (2019) | The Yule Process Revisited: Exploring its Potential in the Engineering Analysis of Certain Chemical Reactions | Abstract |
Thomas Zoltan Fahidy | ||
Vol 7, No 4 (2015) | Three-Dimensional Simulation of Metal-Semiconductor-Metal Photodetectors Based InAlAs/InGaAs | Abstract |
S. Benzeghda, F. Hobar | ||
Vol 8, No 2 (2016) | Tin Ions Irradiation Effects on Gold | Abstract |
Farrakh Shahzad, Muhammad Shahbaz Anwar | ||
Vol 7, No 5 (2015) | Tool Wear Phenomena by Drilling of Microholes in Particle-Reinforced Al-Alloy Matrix Composites | Abstract |
L. Kudla | ||
151 - 175 of 182 Items | << < 2 3 4 5 6 7 8 > >> |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize