Materials Developed by Mechanical Alloying and Melt Spinning
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
Materials science is a multidisciplinary research topic related to the development of physics and technology. Mechanical alloying of ribbon flakes is a two steps route to develop advanced materials. In this work, a Fe based alloy was obtained using three pathways: mechanical alloying, melt-spinning and mechanical alloying of previously melt-spun samples. Processing conditions allow us to obtain amorphous or nanocrystalline structures. Furthermore, a bibliographic revision of mechanical alloying is here presented.
Copyright © 2016 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
W. Klement Jr et al, Non-crystalline structure in solidified gold-silicon alloys, Nature 186 (2005), 869-870 .
J.S. Garitaonandia et al. Low-temperature magnetic properties of Fe nanograins in an amorphous Fe-Zr-B matrix, Physical Review B, 26-9 (2000), 6150-6155.
T.D. Shen et al, Soft magnetism in mechanically alloyed nanocrystalline materials, Physical Review B 72 (2005), 014431.
M. Pekala et al., Magnetic and structural studies of ball milled Fe78B13Si9, J. Non-Cryst. Solids, 287 (2001), 380-384.
J.J. Suñol et al, Termal and structural studies changes induced by mechanical alloying in melt-spun Fe-Ni based amorphous alloys, Mater. Sci. Eng. A, 375 (2004), 881-887.
J.S. Benjamin, Dispersion-strengthened electrical heating alloys by powder metallurgy. US Patent US3 660 049. May 2 (1972).
J.S. Benjamin. Powder metallurgical products. British patent 1 298 944. December 6 (1972).
J.S. Benjamin, Dispersion strengthened superalloys by mechanical alloying, Metallurgical Transactions 1(10) (1970), 2943.
C. Suryanarayana, Mechanical alloying and milling, Progress in Materials Science 46(1-2) (2001), 1-184.
C.F. Tang et al, Spark plasma sintering of ODS cobalt base alloy powder by mechanical alloying, Rare Metal Materials and Engineering 36 (2007), 1461-1464.
J.C. Crivello et al, Limits of the Mg-Al gamma-phase range by ball milling, Intermetallics 15 (2007), 1432-1437.
V. Chawla et al, State of the art: Applications of mechanically alloyed materials – A review, Materials and Manufacturing processes 22 (2007), 469-473.
V.V. Cherdyntsev et al, Structure and properties of mechanically alloyed composite materials Al/Al-Cu-Fe quasicrystal, Physics of Metals and Metallography 104 (2007), 497-504.
M. Krasnowski et al, Nanocrystalline FeAl-TiN composites obtained by hot-pressing consolidation of reactively milled powders, Scripta Materialia 57 (2007), 553-556.
M. Karttunen et al, Electrically conductive composite powders and compounds produced with solid state synthesis, Materials and Manufacturing processes 20 (2005), 887-892.
S. Sharma et al, Mechanical crystallization of Fe-based amorphous alloys, Journal of Applied Physics 102 (2007), 083544.
E.Y. Lee et al, Syntheis of composite Mg-Ni-Ca metal hydride by mechanical alloying, Journal of Alloys and Compounds 446 (2007) 129-133.
Y. Ueda et al, Magnetoresistance and Magnetism in Fe-Cu alloys produced by electrodeposition and mechanical alloying methods, Mater. Sci. Eng. A, 217 (1996), 371-375.
C. Suryanarayana et al, The science and technology of mechanical alloying, Mater. Sci. Eng. A 304 (2001), 151-158.
Murthy B.S: et al. Novel materials synthesis by mechanical alloying/milling. International Materials Reviews 1998, 43(3) 101-141.
www.isinet.com. 15/02/2008.
H. Schropf et al, Ordering versus disordering tendencies in mechanically alloyed (NixFe1-x) Al alloys, Scripta Metallurgica and Materialia, 30 (1994), 1569-1574.
R.J. Pérez et al, Thermal stability of nanocrystalline Fe-10 wt.% Al produced by cryogenic mechanical alloying, Nanostructured Materials, 7 (1996), 565-572.
C. Stiller et al, The influence of alloy composition and thermal treatment on structural and magnetic properties of mechanically alloyed Fe-Transition metal-based alloys, Metastable, Mechanically Alloyed and Nanocrystalline Materials, 225 (1996), 695-700.
T. Koyano et al, Mechanical alloying process of Fe-Cr powders studied by magnetic measurements, Journal of Applied Physics, 73 (1993), 429-433.
N. Kataoka et al, Magnetic properties of iron-base bcc alloys produced by mechanical alloying, Journal of Materials Science, 26 (1991), 4621-4625.
A. Hightower et al, Mechanical alloying of Fe and Mg, Journal of Alloys and Compounds, 252 (2007), 238-244.
S.K. Xia et al, Phase segregation in mechanically alloyed Invar Fe-Ni alloys, Metastable, Mechanically Alloyed and Nanocrystalline Materials, 225 (1996), 453-457.
M. Abdellaoui et al, Far from equilibrium crystalline to amorphous phase-transition induced by mechanical alloying in the Fe-Si system, Journal de Physique IV, 2 (1992), 73-78.
A.F. Cabrera et al, Mechanical alloying of iron and tin powders: A Mössbauer study, Metastable, Mechanically Alloyed and Nanocrystalline Materials, 179 (1995), 231-235.
S. Suriñach et al, Preparation of Fe-Ni based metal-metalloid amorphous powders by mechanical alloying, Mater. Sci. Eng. A 182 (1994), 1285-1290.
N.E.Fenineche et al, Structure and magnetic properties of nanocrystalline Co-Ni and Co-Fe mechanically alloyed, Materials Letters 27 (2003), 4165-4169.
J. Eckert et al, Nanostructure formation and properties of ball-milled NiAl intermetallic compound, Mater. Sci. Eng. A 240 (1997), 619-624.
J.J. Suñol et al, Development of Fe based nanocrystalline materials by mechanical alloying, Revista de Metalurgia (2008). In press.
J.J. Suñol et al, Thermal and structural changes induced by mechanical alloying in melt-spun Fe-Ni based amorphous alloys, Mater. Sci. Eng. A 375 (2004), 881-887.
H.E. Kissinger, Reaction kinetics in differential thermal analysis. Analytical chemistry, 29 (1957), 1702-1706.
J.J. Suñol et al, Mechanically induced thermal changes in amorphous metallic melt-spun alloys, Materials Letters, 57 (2003), 4222-4226.
J.J. Suñol et al, Comparison of Fe-Ni-P-Si alloys prepared by ball milling, J. Non-Cryst. Solids, 287 (2001), 114-119.
A. Grabias et al, Structure of the nanocrystalline Fe41Ni20Co20Zr7B12 alloy formed by ball milling, Journal of Alloys and Compounds, 434 (2007), 493-496.
R. Brüning et al, A comparison between the thermal properties of Ni-Zr amorphous alloys obtained by mechanical alloying and melt-spinning, Mater. Sci. Eng. A, 97 (1988), 317-320.
L.J. Chang et al, Synthesis of the magnesium-based nano/amorphous composite alloy powder by the combination method of melt-spinning and mechanical alloying, Key Engineering Materials, 313 (2006), 97-103.
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize