Email this article 
Mechanical Properties Evaluation of New AuNP-PMMA Composite
(*) Corresponding author
DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
Abstract
A new self-polymerized AuNP-PMMA composite has been prepared and subjected to dynamic mechanical analysis (DMA). The tests were performed on the basis of the Young’s Modulus’ approximation to investigate the viscoelasticity and the thermal conductivity of rectangular and cylindrical test specimens. The thermal conductivity of the samples was conducted over a physiologic temperature range (0 to70 oC). The results indicated that the gold nanoparticles fillers have potential as added components in denture bases to provide increased thermal diffusivity and well enhanced viscoelastic responses, which could lead to more dental patient satisfaction
Copyright © 2013 Praise Worthy Prize - All rights reserved.
Keywords
References
G. Shklar, D. Chernin, Chapter 22, Dental Science and Practice in the Twentieth Century, Part 2. A Sourcebook of Dental Medicine. (Wabam, Maro Publications, 2002).
S. H. Supplee, Notes on the Evolution of Complete and partial dentures." In: Boucher C. O. "Swenson’s Complete Dentures." (6th edn. St. Louis, Mosby, C. V., 1970: 561-569).
M. E. Boone, New materials and techniques in Prosthodontics, Dent. Clin. North Am. 27 (1983), 793-803.
R. W. Phillips, Skinner’s Science of Dental Materials. (10th edn. Philadelphia, Saunders, W. B., 1996: 1-12).
R. W. Phillips, Skinner’s Science of Dental Materials. (10th edn. Philadelphia, Saunders, W. B., 1996: 237-300).
R. D. Phoenix, Denture Base Materials. Dent. Clin. North Am. 40 (1996), 113-120.
A. P. Brady, H. Lee, J. A. Orlowski, Thermal conductivity studies of composite dental restorative materials. J. Biomed. Mater. Res. 8 (1974), 471-85.
http://dx.doi.org/10.1002/jbm.820080614
R. G. Craig, Restorative dental materials. St Louis: Mosby C. V. (1993).
A. Koroglu, T. Ozdemir, A sanmaz. Comparative Study of the Mechanical Properties of Fiber-Reinforced Denture Base Resin. J. App. Polymer Sci. 2009, 113(2), 716-720
http://dx.doi.org/10.1002/app.30123
G. Zappini, A. Kammann, W. Wachter. Comparison of fracture tests of denture base materials. J Prosthetic Dent 2003;90(6):578-85
http://dx.doi.org/10.1016/j.prosdent.2003.09.008
K. K. Narva, L. V. Lassila, P. K. Vallittu. The static strength and modulus of fiber reinforced denture base polymer. Dent Mater 2005;21(5):421-8
http://dx.doi.org/10.1016/j.dental.2004.07.007
B. Marrs, R. Andrews, T. Rantell, D. Pienkowski. Augmentation of acrylic bone cement with multiwall carbon nanotubes. J Biomed Mater Res A 2006;77(2):269-76
http://dx.doi.org/10.1002/jbm.a.30651
R. Rodford. The development of high impact strength denture-base materials. J Dent 1986; 14: 214-17.
http://dx.doi.org/10.1016/0300-5712(86)90004-7
R. Rodford. Further development and evaluation of high impact strength denture-base materials. J Dent 1990; 18: 151-57.
http://dx.doi.org/10.1016/0300-5712(90)90056-k
S. H. Kim, D. C. Watts. The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin. J Prosthetic Dent 2004;91(3):274-80
http://dx.doi.org/10.1016/j.prosdent.2003.12.023
A. E. Ellakwa, M. A. Morsy, A. M. El-Sheikh. Effect of aluminum oxide addition on the flexural strength and thermal diffusivity of heat-polymerized acrylic resin." J. Prosthodont. 2008; 17(6): 439-44.
http://dx.doi.org/10.1111/j.1532-849x.2008.00318.x
G. Arrachart, I. Karatchevtseva, A. Heinemann, D. J. Cassidy, G. Triani. Synthesis and characterisation of nanocomposite materials prepared by dispersion of functional TiO2 nanoparticles in PMMA matrix. J. Mat. Chem. 2011, 21(34), 13040-13046.
http://dx.doi.org/10.1039/c1jm11964h
G. Barbillon, F. Hamouda, S. Held, P. Gogol, B. Bartenlian. Gold nanoparticles by soft UV nanoimprint lithography coupled to a lift-off process for plasmonic sensing of antibodies. Microelectronic Engineering 2010, 87(5-8), 1001-1004.
http://dx.doi.org/10.1016/j.mee.2009.11.114
E. Yilmaz, S. Suzer. Au nanoparticles in PMMA matrix: In situ synthesis and the effect of Au nanoparticles on PMMA conductivity. App. Surf. Sci. 2010, 256 (22), 6630-6633.
http://dx.doi.org/10.1016/j.apsusc.2010.04.060
Ozkaraoglu, E., Tunc, I., Suzer, S. “Preparation of Au and Au-Pt nanoparticles within PMMA matrix using UV and X-ray irradiation” Polymer 2009, 50 (2), Pages 462-466.
http://dx.doi.org/10.1016/j.polymer.2008.12.008
L. A. Garcia-Cerda, L. E. Romo-Mendoza, M. A. Quevedo-Lopez. Synthesis and characterization of NiO nanoparticles and their PMMA nanocomposites obtained by in situ bulk polymerization. J. Mat. Sci. 2009, 44(17), 4553-4556.
http://dx.doi.org/10.1007/s10853-009-3690-6
A. Kraft, V. Arrighi, M. A. Khlifa. Thermal and dynamic mechanical properties of solution-dispersed nanoparticle filler-PMMA composites. 239th ACS National Meeting, San Francisco, CA, United States, March 21-25, 2010, PMSE-435.
E. A. Zaragoza-Contreras, C. A. Hernandez-Escobar, M. E. Mendoza-Duarte,S. G. Flores-Gallardo, R. Ibarra-Gomez, A. Marquez-Lucero. Thermal and mechanical analysis of silver/carbon nanoparticle-PMMA nanocomposites obtained by miniemulsion polymerization. Polymer Journal (Tokyo, Japan) 2009, 41(10), 816-821.
http://dx.doi.org/10.1295/polymj.pj2009090
A. O. Alhareb, Z. A. Ahmad. Effect of Al2O3/ZrO2 reinforcement on the mechanical properties of PMMA denture base. J. Reinforced Plastics and Composites 2011, 30(1), 86-93. Published: JAN 2011.
http://dx.doi.org/10.1177/0731684410379511
M. Mirzataheri, M. Atai, A. R. Mahdavian. Physical and Mechanical Properties of Nanocomposite Barrier Film Containing Encapsulated Nanoclay. J. Appl. Poly. Sci. 2010, 118(6), 3284-3291.
http://dx.doi.org/10.1002/app.32711
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize
