Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels
(*) Corresponding author
The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner’s damage summation. Predicted results are compared with available experimental data.
Copyright © 2015 Praise Worthy Prize - All rights reserved.
J.R. Vinson, The behaviour of sandwich structures of isotropic and composite materials, Technomic, Westport (1999).
R.A.W. Mines, C.M. Worrall and A.G. Gibson, Low velocity perforation behaviour of polymer composite sandwich panels, Int J Impact Engng 21 (1998) (10), pp. 855–879.
L. Torre and J.M. Kenny, Impact testing and simulation of composite sandwich structures for civil transportation, Compos Struct 50 (2000), pp. 257–267. 4] A. Kootsookos and P.J. Burchill, The effect of the degree of cure on the corrosion resistance of vinyl ester/glass fibre composites, Composites A 35 (2004), pp. 501–508
A. Kootsookos and P.J. Burchill, The effect of the degree of cure on the corrosion resistance of vinylester/glass fibre composites, Composites A 35 (2004), pp. 501–508
J.F. Allard, Propagation of sound in porous media: modelling sound absorbing materials, Elsevier Applied Science (1993).
S. Sahraoui, E. Mariez and M. Etchessahar, Mechanical testing of polymeric foams at low frequency, Polym Test 20 (2001), pp. 93–96.
C.A. Steeves and N.A. Fleck, Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part I: analytical models and minimum weight design, Mech Sci 46 (2003), pp. 561–583.
C.A. Steeves and N.A. Fleck, Material selection in sandwich beam construction, Scripta Mater 50 (2004), pp. 1335–1339.
W. Hwang and KS. Han: Fatigue modulus concept and life prediction, J Comps Mater. Vol. 154-165. (1986), pp. 20.
HA. Whitworth: A stiffness degradation model for composite laminates under fatigue loading, Compos Struct. Vol. 95-101. (1998), pp. 40.
HA. Whitworth, Evaluation of residual strength degradation in composite laminates under fatigue loading. Comps Struct. Vol. 261-304. (2000), pp. 48
KL. Reifsnider, C. Scott and D. Jermy, The mechanics of composite strength evaluation. Compos Sci Technol. Vol. 2539-2546. (2000), pp. 60
R. Talreja: Fatigue of composite materials, Technomic Publishing Company (1987).
KL. Reifsnider, K. Schulte and JC. Duck: Long term behaviour of composite materials. In: long term of behaviour of composites, ASTM STP. Vol. 136-159. (1983), pp. 813
Wen-Fang. Wu, LJ. Lee and ST. Choi, A study of fatigue damage and fatigue life of composites laminates, J Compos Mater. Vol. 123-137. (1996), pp. 30
TP. Philippidis and AP. Vassilopoulos, Fatigue of composites laminates under off-axis loading, Int J Fatigue. Vol. 253-262. (1999), pp. 21
HJ. Kin, Evaluation of durability and strength of stitched foam core sandwich structures, Compos Struct. Vol. 543-550. (1999), pp. 47
RA. Shenoi, SD. Clark and HG. Allen, Fatigue behaviour of polymer composite sandwich beams, J Compos Mater. Vol. 2423-2445. (1995), pp. 29
HA. Withworth, Modelling stiffness reduction of graphite/epoxy composite laminates. J Compos Mater. Vol. 362-372. (1987), pp. 21
W. Hwang, CS. Lee, HC. Park and KS. Han, Single and multi-stress level fatigue life prediction of glass-epoxy composites, J Adv Mater. Vol. 3-9. (1995).
G. Caprino and G. Giorleo, Fatigue lifetime of glass fabric/epoxy composites, Compos part A: Appl Sci Manufact. Vol. 299-304. (1999), pp. 30
S. D. Clark, R. A. Shenoi and H. G. Allen, Modelling the fatigue behaviour of sandwich beams under monotonic, 2-step and block-loading regimes. Composites science and technology 59 (1999), pp 471-486.
K. Azouaoui, S. Rechak, Z. Azari, S. Benmedakhen, A. Laksimi and G. Pluvinage: Modelling of damage and failure of glass/epoxy composite plates subject to impact fatigue. Vol. 877-885. (2001), pp. 23.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2023 Praise Worthy Prize