Diagnostic Study of the Possibility of Damaged Sewn Sandwiches to Undergo a New Impact
(*) Corresponding author
DOI: https://doi.org/10.15866/irece.v14i4.21955
Abstract
Over the past decades, sandwich structures have shown impressive performances in impact resistance and damage tolerance, which has allowed their innovations in various disciplines to flourish. The birth of sewn sandwiches has given, on the one hand, elements with structural cores that participate in the resistance to transverse shearing and, on the other hand, sandwich skins that contribute to resisting forces from the same direction to achieve an assembly, giving the structure an optimal lightness. After evaluating the behavior of said structure against impact stresses, in this study, it is proposed to start by evaluating the effect of damage caused by impacts of different energies. Then, their influence on the structure's mechanical properties and its ability to undergo one or more new impacts will be checked. For this, by using a microscope, diagnostic tests have been carried out for each sample after the first impact, followed by characterization by non-destructive tests based on vibration analysis in order to examine and compare the properties of a healthy plaque with those of the affected plaques. The tests are carried out on samples of dimensions 150 × 200 × (1.5 + 20 + 1.5 = 23) mm3. The results obtained by using the specialized software PULSE have encouraged a second series of effects on these samples.
Copyright © 2023 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
Cucinotta, F., Sfravara, F., Neri, P., Razionale, A. (2019). Composite sandwich impact response: Experimental and numerical analysis, Frat. Ed Integrita Strutt., 13(47), pp. 367-82.
https://doi.org/10.3221/IGF-ESIS.47.27
Mocian, O.A., Constantinescu, D.M., Sorohan, Ş., Sandu, M. (2019). Low velocity failure and integrity assessment of foam core sandwich panels, Frat. Ed Integrita Strutt., 13(48), pp. 230-41.
https://doi.org/10.3221/IGF-ESIS.48.24
Staroverov, O.A., Strungar, E.M., Wildemann, V.E. (2021). Evaluation of the survivability of cfrp honeycomb-cored panels in compression after impact tests, Frat. Ed Integrita Strutt., 15(56), pp. 1-15.
https://doi.org/10.3221/IGF-ESIS.56.01
Akmaluddin, A., Murtiadi, S., Anshari, B., Flexural Stiffness of Normal and Sandwich Reinforced Concrete Beam Exposed to Fire Under Fixed Loading, (2020) International Review of Civil Engineering (IRECE), 11 (1), pp. 36-44.
https://doi.org/10.15866/irece.v11i1.17550
Bendada, A., Boutchicha, D., Chouiter, A., Miri, M. (2019). Numerical-experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination, Frat. Ed Integrita Strutt., 13(49), pp. 655-65.
https://doi.org/10.3221/IGF-ESIS.49.59
Drake, D.A., Sullivan, R.W., Lovejoy, A.E., Clay, S.B., Jegley, D.C. (2021). Influence of stitching on the out-of-plane behavior of composite materials - A mechanistic review, J. Compos. Mater., 55(23), pp. 3307-21.
https://doi.org/10.1177/00219983211009290
Mouritz, A.P., Leong, K.H., Herszberg, I. (1997). A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites, Compos. Part A Appl. Sci. Manuf., 28(12), pp. 979-91.
https://doi.org/10.1016/S1359-835X(97)00057-2
Mouddene, B., Labbaci, B., Missoum, L., Abdeldjebar, R. (2017). Mechanical properties identification of stitched sandwich by compression, Int. J. Mech. Eng. Technol., 8(11), pp. 376-84.
Shigang, A., Yiqi, M., Yongmao, P., Daining, F., Liqun, T. (2013). Effect of stitching angle on mechanical properties of stitched sandwich panels, Mater. Des., 50, pp. 817-24.
https://doi.org/10.1016/j.matdes.2013.03.058
Che, L., Xu, G. dong., Zeng, T., Cheng, S., Zhou, X. wei., Yang, S. cai. (2014). Compressive and shear characteristics of an octahedral stitched sandwich composite, Compos. Struct., 112(1), pp. 179-87.
https://doi.org/10.1016/j.compstruct.2014.02.012
Safri, S.N.A., Sultan, M.T.H., Yidris, N., Mustapha, F. (2014). Low velocity and high velocity impact test on composite materials - A review, Int. J. Eng. Sci., 3(9), pp. 50-60.
https://doi.org/10.1177/1464420711409985
David-West, O.S., Nash, D.H., Banks, W.M. (2008). An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact, Compos. Struct., 83(3), pp. 247-58.
https://doi.org/10.1016/j.compstruct.2007.04.015
Ma, Q., Rejab, M.R.M., Siregar, J.P., Guan, Z. (2021). A review of the recent trends on core structures and impact response of sandwich panels, J. Compos. Mater., 55(18), pp. 2513-55.
https://doi.org/10.1177/0021998321990734
van Hoorn, N., Kassapoglou, C., Turteltaub, S., van den Brink, W. (2022). Experimental damage tolerance evaluation of thick fabric carbon/epoxy laminates under low-velocity and high-velocity impact and compression-after-impact, J. Compos. Mater., 56(5), pp. 761-78.
https://doi.org/10.1177/00219983211060501
Papa, I., El Hassanin, A., Langella, T., Lopresto, V. (2021). Experimental and analytical model for the penetration and indentation prediction on BFRP laminates under low velocity impacts, J. Compos. Mater., 55(10), pp. 1331-8.
https://doi.org/10.1177/0021998320969790
Lascoup, B., Aboura, Z., Khellil, K., Benzeggagh, M. (2005). Stitching Effect on Static and Dynamic Behaviour of Sandwich Structures, Sandw. Struct. 7 Adv. with Sandw. Struct. Mater., pp. 681-90.
https://doi.org/10.1007/1-4020-3848-8_69
Lascoup, B., Aboura, Z., Khellil, K., Benzeggagh, M. (2006). On the mechanical effect of stitch addition in sandwich panel, Compos. Sci. Technol., 66(10), pp. 1385-98.
https://doi.org/10.1016/j.compscitech.2005.09.005
Santhanakrishnan, R., Samlal, S., Joseph Stanley, A., Jayalatha, J. (2018). Impact study on sandwich panels with and without stitching, Adv. Compos. Mater., 27(2), pp. 163-82.
https://doi.org/10.1080/09243046.2017.1410376
Kaya, G., Selver, E. (2019). Impact resistance of Z-pin-reinforced sandwich composites, J. Compos. Mater., 53(26-27), pp. 3681-99.
https://doi.org/10.1177/0021998319845428
Bounoua, T., Mohamed, D., Izzeddine, B., Ahmed, T. (2017). Experimental study of the behavior of a stitched sandwich plate under a rapid dynamics "shock," Int. J. Civ. Eng. Technol., 8(12), pp. 185-93.
Nasiri, M.R., Mahjoob, M.J., Aghakasiri, A. (2011). Damage detection in a composite plate using modal analysis and artificial intelligence, Appl. Compos. Mater., 18(6), pp. 513-20.
https://doi.org/10.1007/s10443-011-9231-x
Daoui, A., Zerizer, A. (2018). Identification of elasticity modulus by vibratory analysis (Application to a natural composite: Aleppo pine wood), MATEC Web Conf., 149, pp. 01045.
https://doi.org/10.1051/matecconf/201814901045
Al-Baghdadi, H., Mahan, H., Shubbar, A., Al-Khafaji, Z., Studying the Impact of Imposed Actual Loads on the Non-Destructive Test Results for Evaluating the Compressive Strength and Other Properties of Concrete, (2022) International Review of Civil Engineering (IRECE), 13 (3), pp. 226-233.
https://doi.org/10.15866/irece.v13i3.20880
Zhang, X., Wang, Q., Wang, Y., Li, Q. (2020). Experimental and Analytical Study on the Vibration Performance of U-Shaped Steel-Concrete Composite Hollow Waffle Slab, Shock Vib., 2020.
https://doi.org/10.1155/2020/1928075
Rezvani, K., Maia, N.M.M., Sabour, M.H. (2018). A comparison of some methods for structural damage detection, Sci. Iran., 25(3B), pp. 1312-22.
https://doi.org/10.24200/sci.2017.4494
Gibson, R.F. (2000). Modal vibration response measurements for characterization of composite materials and structures, Compos. Sci. Technol., 60(15), pp. 2769-80.
https://doi.org/10.1016/S0266-3538(00)00092-0
Bledzki, A.K., Kessler, A., Rikards, R., Chate, A. (1999). Determination of elastic constants of glass/epoxy unidirectional laminates by the vibration testing of plates, Compos. Sci. Technol., 59(13), pp. 2015-24.
https://doi.org/10.1016/S0266-3538(99)00059-7
Tbatou, T., El Youbi, M., Dynamic and Structural Study of a RC Building Braced by FRP Composite Materials, (2020) International Review of Civil Engineering (IRECE), 11 (1), pp. 1-9.
https://doi.org/10.15866/irece.v11i1.16991
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize