Open Access Open Access  Restricted Access Subscription or Fee Access

Optimization of the Heat Consumption of a Pottery Kiln by Use of a Heat Exchanger


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irece.v8i3.11599

Abstract


This work falls within the framework of energy efficiency. It is interested in reducing the consumption of energy in the craft sector. Preliminary work has shown that the energy consumption of a pottery kiln is high and that the excess consumption is due to the loss of heat by the combustion gases escaping through the chimney of the furnace. Recovery of this heat can result in a great energy saving. A heat recovery system has shown that a good part of this energy can be recovered, which could be used for the first stage of cooking during which the water contained in the pottery is evaporated.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords


Energy Consumption; Combustion Gases; Heat Exchanger System; Recovered Energy; Pottery Kiln; Chimney

Full Text:

PDF


References


M. Kassinopoulos, Modélisation et commande sous optimale d’un four d’industrie céramique, Dept. Automatique, Université Paul Sabatier – Toulouse, 1-125, 1980.

H. El Hajjar, Controle et conduitenumeriques d’un four Tunnel d’Industrie Céramique, Dept. Automatique/Robotique, Université Paul Sabatier – Toulouse III, 1-210, 1983.

E. Hachem, Méthode d’éléments finis stabilisée pour la résolution de transferts thermiques et d’écoulements turbulents dans les fours industriels, Spécialité. Mécanique numérique, Ecole nationale supérieure des mines, Paris, 1-180, 2009.
http://dx.doi.org/10.1051/meca:2005029

Bakkari, M., Lemmini, F., Gueraoui, K., Recovery Heat Loss of a Pottery Kiln, (2016) International Review of Civil Engineering (IRECE), 7 (3), pp. 74-78.
http://dx.doi.org/10.15866/irece.v7i3.9417

M. Bakkari, F. Lemmini, K. Gueraoui, Optimizing the consumption of a pottery kiln in sale (Oulja), Materials Research Proceedings, vol. 1, 222-225, 2016.
http://dx.doi.org/10.21741/9781945291197-55

J. Taine, F. Enguehard, E. Lacona, Transferts thermiques Introduction aux transferts d’énergie, Dunod, 1-180, 2014.
http://dx.doi.org/10.1016/s0035-3159(98)80001-9

Belcadi M. El Rhaleb H., Gueraoui K., Driouich M., Hybridization microwave and laser for melting of ceramic surface. Adv. Studies Theo. Phys., 8 (2014).
http://dx.doi.org/10.12988/astp.2014.39109

Gueraoui, K., Hammoumi, A., Zeggwagh, G. (1996), Ecoulements pulsés de fluides in élastiques en conduites déformables poreuses et anisotropes, C. R. Acad. Sci., Paris, 323, série B, pp. 825-832.
http://dx.doi.org/10.1051/lhb/1998075

Ghouli A., Gueraoui K., Walid M., Aberdane I., El Hammoumi A., Kerroum M., Zeggwagh G. and Haddad Y., Numerical Study of Pollutant Propagation Process in Homogeneous Porous unsaturated Media, (2009) International Review of Mechanical Engineering (IREME), 3 (3), pp. 358-362.

Samir Men-La-Yakhaf, Kamal Gueraoui, Mohamed Driouich, New numerical and mathematical code reactive mass transfer and heat storage facilities of argan waste, Adv. Studies Theor. Phys., Vol. 8, 2014, no. 10, 485–498.
http://dx.doi.org/10.12988/astp.2014.4331

Belcadi, M., El Rhaleb, H., Gueraoui, K., Driouich, M. Combined processes: Laser assisted microwave sintering of alumina (2013) International Review of Mechanical Engineering, 7 (7), pp. 1451-1457.

Men-la-yakhaf, S., Gueraoui, K., Maaouni, A., Driouich, M. Numerical and mathematical modeling of reactive mass transfer and heat storage installations of argan waste, (2014) International Review of Mechanical Engineering, 8 (1), pp. 236-240.
http://dx.doi.org/10.15866/ireme.v8i1.1265

Saad A., Echchelh A., Lahlou F., Gueraoui K., Cardot P., The Kinematic Elution Of 99mtc Radio Labeled Red Blood Cells in a Channel Of Gravitational Field Flow Fractionation (GrFFF), (2008) International Review of Mechanical Engineering (IREME), 2 (2), pp. 233-240.

Belcadi, M., Gueraoui, K., El Rhaleb, H., Driouich, M., Dhiri, A., Numerical Simulation of Microwave Assisted Laser Melting Alumina, (2015) International Review of Mechanical Engineering (IREME), 9 (5), pp. 429-437.
http://dx.doi.org/10.15866/ireme.v9i5.2042

EL-Tourroug, H., Gueraoui, K., Hassanain, N., Driouich, M., Men-La-Yakhaf, S., Numerical Modeling of the Phenomenon of Crystallization of Incompressible Fluid Flows into Rigid Pipes. Application to Polymer Melts, (2015) International Review on Modelling and Simulations (IREMOS), 8 (1), pp. 99-103.
http://dx.doi.org/10.15866/iremos.v8i1.5141

Aberdane, I., Gueraoui, K., Taibi, M., Ghouli, A., El-Hammoumi, A., Cherraj, M., Kerroum, M., Walid, M., Fihri, O.F., Haddad, Y.M., Two-dimensional theoretical and numerical approach of pollutant transport in the lowest layers of the atmosphere, (2009) International Review of Mechanical Engineering (IREME), 3 (4), pp. 494-502

Sammouda, M., Gueraoui, K., Driouich, M., El Hammoumi, A., Brahim, A.I., The variable porosity effect on the natural convection in a non-darcy porous media, (2011) International Review on Modelling and Simulations (IREMOS), 4 (5), pp. 2701-2707.

Sammouda, M., Gueraoui, K., Driouich, M., El-Hammoumi, A., Iben Brahim, A., Non-Darcy natural convection heat transfer along a vertical cylinder filled by a porous media with variable porosity, (2012) International Review of Mechanical Engineering (IREME), 6 (4), pp. 698-704.

Sammouda, M., Gueraoui, K., Driouich, M., Ghouli, A., Dhiri, A., Double diffusive natural convection in non-darcy porous media with non-uniform porosity, (2013) International Review of Mechanical Engineering (IREME), 7 (6), pp. 1021-1030.

El Khaoudi, F., Gueraoui, K., Driouich, M., Sammouda, M., Numerical and theoretical modeling of natural convection of nanofluids in a vertical rectangular cavity, (2014) International Review on Modelling and Simulations (IREMOS), 7 (2), pp. 350-355.
http://dx.doi.org/10.15866/iremos.v7i2.585

Tricha, M., Gueraoui, K., Zeggwagh, G., Mzerd, A., New numerical and theoretical approaches to study the blood flows at microcirculation level, (2014) International Review of Mechanical Engineering (IREME), 8 (6), pp. 1043-1047.
http://dx.doi.org/10.15866/ireme.v8i6.2725


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize