Strength Development and Water Permeability of Hybrid Steel Fibre Reinforced Concrete
(*) Corresponding author
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
The paper presents results of an investigation conducted to study the compressive strength, split tensile strength and water permeability of Hybrid Steel Fibre Reinforced Concrete (HySFRC). Steel fibres of different lengths i.e. 12.5 mm, 25 mm and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain binary and ternary combinations. Mixes with no fibres and containing mono steel fibres were also cast for comparison purpose. The total fibre volume fraction was kept at 0.5%. A total number of 504 cube specimens of size 100 x 100 x 100 mm were tested for compressive strength, split tensile strength and water permeability. It has been observed that a fibre combination of 33% 12.5 mm + 33% 25 mm + 33% 50 mm long fibres can be adjudged as the most appropriate combination to be employed in HySFRC for compressive strength, split tensile strength and water permeability
Copyright © Praise Worthy Prize - All rights reserved.
Soongwang, M. Tia, and D. Bloomquist, Factors affecting the strength and permeability of concrete made with porous limestone, ACI Materials Journal, 88, pp. 400-406, 1991.
F.D. Lydon, Effect of coarse aggregates on relative permeability of concrete, Construction and Building Materials, 8, pp. 185-189, 1994.
P.B Bamforth, The water permeability of concrete and its relationship with strength, Magazine of Concrete Research, No.43, pp. 233-241, 1991.
A.P. Singh and D. Singhal, Effect of concrete strength on of SFRC , National Conference on Advances in Concrete Technology, pp. 17-22, 2000.
M Nataraja, N. Dhang and A.P. Gupta, Steel fibre reinforced concrete under compression, The Indian Concrete Journal, pp. 353-356, 1998.
S.K. Saluja, M.S. Sharma, A.P. Singh, and S Kumar, Compressive strength of fibrous concrete, The Indian Concrete Journal, pp. 99-102, 1992.
A.P. Singh and D. Singhal, Effect of fibre shape on compressive and bond strength of steel fibre reinforced concrete, IE (I) -CV 79 (1), pp. 136-139, 1999-B.
M.C Nataraja, N. Dhang and A.P. Gupta, Tensile strength of steel Fibre reinforced concrete subjected to flexure and splitting test, Fifth International Conference on Concrete Technology for Developing Countries, 2, pp. 10-17,1999.
M.C Nataraj, N. Dhang, and A.P. Gupta, Splitting tensile strength of SFRC, The Indian Concrete Journal, pp. 287-290, 2001.
Y. Mohammadi, and S.K. Kaushik, Investigation of mechanical properties of steel fibre reinforced concrete with mixed aspect ratio of fibre, Journal of Ferro cement, 33, pp. 1-14,2003.
S. Yazici, G. Inan and V. Tabak, Effect of aspect ratio and volume fraction of steel fibre on the mechanical properties of SFRC, Construction and Building Materials , 21 pp. 1250-1253, 2007.
Y. Mohammadi, S.P Singh and S.K. Kaushik, Properties of steel fibrous concrete containing mixed fibre in fresh and hardened, Construction and Building Material, 22, pp. 956-965, 2006.
B. Miloud, Permeability and porosity characteristics of steel fibre reinforced concrete, Asian Journal of Civil Engineering (Building and Housing), 6, pp. 317-330, 2005.
A.P. Singh and D. Singhal, Effect of fibre content on permeability of steel fibre reinforced concrete, Fifth International Conference on Concrete Technology for Developing Countries, 2, pp. 18-26, 1999-A.
A.P. Singh and D. Singhal, Effect of cement and fibre content on permeability of SFRC, Journal of Structural Engineering, 28(1), pp. 49-55, 2001-A.
A.P. Singh and D. Singhal, Permeability of steel fibre reinforced concrete', IE (I) Journal-CV, 82, pp. 145-149, 2001-B.
A.P Singh, R. Agrawal and D. Singhal, Permeability and strength characteristics of steel fibre reinforced concrete, Journal of Ferro cement, 32, pp. 127-137, 2002.
J. Rapoport, Aldea, S.P. Shah, M. Asce, B. Ankenman, and A. Karr, Permeability of cracked steel fibre reinforced concrete, Journal of Material in Civil Engineering, 14, pp. 355-358, 2002.
N. Ganesan, Permeability of steel fibre reinforced high performance concrete composite, IE (I) Journal-CV, 86, pp. -11, 2005.
N. Banthia, and A. Bhargava., Permeability of stressed concrete and role of fibre reinforcement, ACI Material Journal, 104, pp. 70-76, 2007.
N. Banthia, and M. Sappakittipakorn, Toughness enhancement in steel fibre reinforced concrete through fibre hybridization, Cement and Concrete Research, 37, pp. 1366-1372, 2007.
M., Hoseini, V. Bindiganavile, and N. Banthia,The effect of mechanical stress on permeability of concrete: A review, Cement & Concrete Composites, 31, pp. 213-220, 2009.
M.D. Lepech, and V.C. Li,Water permeability of engineered compendious composite, Cement and concrete composites, 31, pp. 744-753, 2009.
W. Lin, R. Huang, J. Chang, and C. Lee, Effect of silica fumes on the permeability of fibre cement composite, Journal of the Chinese Institute of Engineers, 32, pp. 531-541, 2009.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2023 Praise Worthy Prize