Open Access Open Access  Restricted Access Subscription or Fee Access

Notched UWB Circular Monopole Antenna Design Using Uni-Planar EBG Structures


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irecap.v6i5.9456

Abstract


The proposed antennas employs uniplanar Electromagnetic Band Gap (EBG) structures which are capacitively combined to antenna feed to realize band-notched designs. The benefits of uniplanar EBG structures are elimination of vias therefore it shortens fabrication procedure and makes them compatible with microwave and millimetre circuits. Two dissimilar notched UWB antennas designs with square and circular designed uniplanar EBGs are proposed. Antenna with square EBGs has a notch in c-band at frequencies 6.05 GHz -7.43 GHz. Antenna with circular EBGs has a notch in c-band at frequencies 6.23 GHz -7.68 GHz. Notch frequencies can be altered just by changing the connecting strips and gaps of EBG cells. Measured outcomes are found to be in near agreement with simulated ones.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords


Circular Monopole; Notch Bands; Uniplanar Electromagnetic Band Gap (EBG) Structure; Ultra-Wide Band (UWB)

Full Text:

PDF


References


C. A. Balanis, Antenna Theory: Analysis and Design, 3rd ed, 811-876, Wiley India Edition 2012
http://dx.doi.org/10.1109/iwat.2012.6178384

Ghariani, N., Karoui, M., Chaoui, M., Lahiani, M., Ghariani, H., Design of a Bell-Shaped Ultra Wideband Antenna for Indoor Localization System, (2015) International Journal on Communications Antenna and Propagation (IRECAP), 5 (6), pp. 323-327.
http://dx.doi.org/10.15866/irecap.v5i6.7666

Bandi, S., Sudhakar, A., Padma Raju, K., A Microstrip Rectangle Carpet Shaped Fractal Antenna for UWB Applications, (2016) International Journal on Communications Antenna and Propagation (IRECAP), 6 (2), pp. 111-115.
http://dx.doi.org/10.15866/irecap.v6i2.8541

J. Liang, C. C. Chiau, X. Chen, and C. G. Parini, “Printed circular disc monopole antenna for ultra-wideband applications,” Electron. Lett., vol. 40, no. 20, pp. 1246–1248, 2004
http://dx.doi.org/10.1049/el:20045966

D.Sievenpiper, “High-impedance electromagnetic surfaces”, Ph.D. dissertation ,Department of Electrical Engineering University of California,Los Angeles,CA,1999
http://dx.doi.org/10.17140/doj-2-121

T. Kamgaing, “High-impedance electromagnetic surfaces for mitigation of switching noise in high speed circuits” Ph.D. dissertation, University of Maryland, USA, 2003.
http://dx.doi.org/10.1109/isdrs.2003.1272104

F.Yang and Y.Rahmat-Samii, Electromagnetic Band Gap Structures in Antenna Engineering, Cambridge University Press, 2009.
http://dx.doi.org/10.1017/cbo9780511754531

F. Yang and Y. Rahmat-Samii, “Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications,” IEEE Trans. Antennas Propag., vol. 51,pp. 2691–2703, Oct. 2003.
http://dx.doi.org/10.1109/tap.2003.817559

M. R. I. Faruque, M. T. Islam, and N. Misran, “Evaluation of specific absorption rate (SAR) reduction for PIFA antenna using metamaterials,” Frequenz, vol. 64, no. 7-8, pp. 144–149, 2010.
http://dx.doi.org/10.1515/freq.2010.64.7-8.144

M. R. I. Faruque, M. T. Islam, and N. Misran, “Study of specific absorption rate (SAR) in the human head by metamaterial attachment,” IEICE Electronics Express, vol. 7, no. 4, pp. 240–246, 2010.
http://dx.doi.org/10.1587/elex.7.240

M. T. Islam, M. R. I. Faruque, and N.Misran, “SAR reduction in a muscle cube with metamaterial attachment,” Applied Physics A, vol. 103, no. 2, pp. 367–372, 2011.
http://dx.doi.org/10.1007/s00339-011-6342-z

F. R. Yang, K. P. Ma, M. Y. Qian, and T. Itoh, “A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuits,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 8, pp. 1509–1514,1999.
http://dx.doi.org/10.1109/22.798004

M. Yazdi, N. Komjani, “Design of a Band-Notched UWB Monopole Antenna by Means of an EBG Structure” IEEE Tran. on Antenna and Wireless Propagation, vol.10, pp.170-173, Jan 2011.
http://dx.doi.org/10.1109/lawp.2011.2116150

L.Peng, C.Ruan, “UWB Band-Notched Monopole Antenna Design Using Electromagnetic-Bandgap Structures” IEEE Trans on Microwave theory and Techniques, vol.59, pp.1074-1081, April 2011.
http://dx.doi.org/10.1109/tmtt.2011.2114090

N. Jaglan and S.D. Gupta, “Design and Analysis of Performance Enhanced Microstrip Patch Antenna with EBG Substrate”, International Journal of Microwave and Optical Technology, vol. 10, no. 2, pp 79-88, March 2015.
http://dx.doi.org/10.1109/icspcom.2015.7150631

Jaglan, N., Dev Gupta, S., Reflection Phase Characteristics of EBG Structures and WLAN Band Notched Circular Monopole Antenna Design, (2015) International Journal on Communications Antenna and Propagation (IRECAP), 5 (4), pp. 233-240.
http://dx.doi.org/10.15866/irecap.v5i4.7045

N. Jaglan and S.D. Gupta, “Surface waves minimisation in Microstrip Patch Antenna using EBG substrate”, International Conference on Signal Processing and Communication, JIIT, Noida, India, pp.35-39, March 2015.
http://dx.doi.org/10.1109/icspcom.2015.7150631

Y. Toyota, A. E. Engin, T. H. Kim, and M. Swaminathan, “Stopband analysis using dispersion diagram for two-dimensional electromagnetic bandgap structures in printed circuit boards,”IEEE Microwave and Wireless Components Letters, vol. 16, no.12, pp. 645–647, 2006.
http://dx.doi.org/10.1109/lmwc.2006.885587

O. Folayan and R. J. Langley, “Wideband reduced size electromagnetic bandgap structure,” Electronics Letters, vol. 41, no. 20, pp. 1099–1100, 2005.
http://dx.doi.org/10.1049/el:20052616

Y. Toyota, A. E. Engin, T. H. Kim, M. Swaminathan, and S. Bhattacharya, “Size reduction of electromagnetic bandgap (EBG) structures with new geometries and materials,” in Proceedings of the 56th IEEE Electronic Components and Technology Conference, pp. 1784–1789, San Diego, Calif, USA, June 2006.
http://dx.doi.org/10.1109/ectc.2006.1645901

B. Q. Lin, Q. R. Zheng, and N. C. Yuan, “A novel planar PBG structure for size reduction,” IEEE Microwave and Wireless Components Letters, vol. 16, no. 5, pp. 269–271, 2006.
http://dx.doi.org/10.1109/lmwc.2006.873507

R. B. Waterhouse and D. Novak, “A small electromagnetic bandgap structure,” in Proceedings of the IEEE MTT-S International Microwave Symposium Digest, pp. 602–605, San Francisco, Calif, USA, June 2006.
http://dx.doi.org/10.1109/mwsym.2006.249666

T. Liu, X. Y. Cao, X. Wen, and B. Q. Lin, “A novel compact EBG structures with relative wide band-gap,” in Proceedings of the Asia-Pacific Microwave Conference (APMC’ 07), pp. 1–3, Bangkok, Thailand, December 2007.
http://dx.doi.org/10.1109/apmc.2007.4554666

B.Q.Lin,X.Y.Ye, X. Y. Cao, and F.Li, “Uniplanar EBG structure with improved compact and wideband characteristics,” Electronics Letters, vol. 44, no. 23, pp. 1362–1363, 2008.
http://dx.doi.org/10.1049/el:20081675

M. S.Alam, M. T. Islam, and N.Misran, “A novel compact split ring slotted electromagnetic bandgap structure for microstrip patch antenna performance enhancement,” Progress in Electromagnetics Research, vol. 130, pp. 389–409, 2012.
http://dx.doi.org/10.2528/pier12060702

H. N. B. Phuong, D. N. Chien, and T. M. Tuan, “A triple bandgap uni-planar EBG structure for antenna applications,” in Proceedings of the Progress in Electromagnetics Research Symposium, pp. 1739–1743, Kuala Lumpur, Malaysia, 2012.
http://dx.doi.org/10.1109/usnc-ursi.2013.6715438

Assimonis, S. D., T. V. Yioultsis, and C. S. Antonopoulos, “Design and optimization of uniplanar EBG structures for low profile antenna applications and mutual coupling reduction,” IEEE Transactions on Antennas and Propagation, Vol. 60, No. 10, 4944–4949, Oct. 2012.
http://dx.doi.org/10.1109/tap.2012.2210178

N.E. Richard W. iolkowski, Metamaterials Physics and Engineering Explorations, IEEE press,2006.
http://dx.doi.org/10.1002/0471784192

Ansoft’sHFSS,[Online], Available:http://www.ansoft.com.
http://dx.doi.org/10.1089/glre.2016.201011

N. Jaglan, S. D. Gupta,B. K. Kanaujia and S. Srivastava, “Developments in Efficient Antenna Design using EBG structures”, in Handbook of Research on Advanced Trends in Microwave and Communication Engineering, A. Qualadi, J. Zbitou, Ed. USA: IGI global Publishers, Aug 2016, pp 34-84.
http://dx.doi.org/10.4018/978-1-5225-0773-4.ch002

N. Jaglan, S. D. Gupta and B. K. Kanaujia and S. Srivastava, “Band Notched UWB Circular Monopole Antenna with Inductance Enhanced modified mushroom EBG structure”, Wireless Networks, Springer, August 2016.
http://dx.doi.org/10.1007/s11276-016-1343-7

N. Jaglan and S. D. Gupta, “Design and development of band notched UWB circular monopole antenna with uniplanar star shaped EBG structures”, International Journal of Microwave and Optical Technology (IJMOT), vol. 11, no. 2, pp 86-91, March 2016.
http://dx.doi.org/10.1007/s11276-016-1343-7

N. Jaglan, B. K. Kanaujia, S. D. Gupta and S. Srivastava, “Triple Band Notched UWB Antenna Design using Electromagnetic Band Gap Structures”, Progress in Electromagnetics Research (PIER) C, vol. 66, pp 139-147, July 2016.
http://dx.doi.org/10.2528/pierc16052304

Wang, T., Dinh, A., Chen, L., Teng, D., Shi, Y., Ko, S., Dal Bello-Haas, V., Basran, J., McCrosky, C., A Transmission Line Modeling for IR-UWB Radars in Human Body Sensing and Detection, (2014) International Review of Aerospace Engineering (IREASE), 7 (4), pp. 142-148.
http://dx.doi.org/10.15866/irease.v7i4.4468

Necibi, O., Hamzaoui, D., Vuong, T., Gharsallah, A., A Novel RFID Antenna with HIS Structure for Ka Band, (2015) International Journal on Communications Antenna and Propagation (IRECAP), 5 (3), pp. 124-131.
http://dx.doi.org/10.15866/irecap.v5i3.6232


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize