Open Access Open Access  Restricted Access Subscription or Fee Access

Analysis of the Physical Characteristics of Series OSRRs in CPW Transmission Line by the Scattering Bond Graph Methodology

(*) Corresponding author

Authors' affiliations



In recent years, the joint use of bond graph approach and Scattering formalism gave us too many important results for the analysis and the understanding behavior of physical systems often operate at high frequencies. This manuscript is built around this new concept of analysis, for this reason, we propose a presentation and application of the SBG technique, on the other hand, we will give an introduction about the SRR, OSRR and CRLH metamaterials transmission line, secondly, we will give the contribution, at high frequencies, of the new technique studied by bond graph and Scattering approach for the analysis of physical characteristics. We will determine, by this new methodology, the scattering parameters of the studied structure, we perform a direct extraction of the equivalent circuit of the two shown types. Finally, the validation of this method will be performed by comparison to the previously results found by the experimental studies.
Copyright © 2016 Praise Worthy Prize - All rights reserved.


Bond Graph Modeling; Metamaterials Transmission Line; SRR; OSRR; CRLH; Scattering Parameters

Full Text:



M. A. Djeziri, R. Merzouki, B. OuldBouamama, G. Dauphin Tanguy (2007). ’ Bond Graph Model Based For Robust Fault Diagnosis’, Proceeding of the 2007 American Control Conference New York City, USA. pp. 3017-3022.

Wellstead P.E. (1979) Introduction to physical systems modeling. Academic, London. ISBN:0-12-744380-0.

Paynter H.M., Busch-Vishniac I.J. (1988) Wave-scattering approaches to conservation and causality. J. Franklin Inst. 325(3):295–313.

W. Borutzky, G. Dauphin-Tanguy, (2004), ’Incremental bond graph approach to thederivation of state equations for robustness study’, Simulation Modelling Practice andTheory, Vol. 12(1), 41-60.

Breedveld P.C. (1984). Decomposition of multiport elements in a revised multi-bond graphnotation. J. Franklin Inst. 318(4):253–273.

C. Sueur, G. Dauphin-Tanguy. (1989). ’Structural Controllability and Observabilityof linear Systems Represented by Bond Graphs’. Journal of Franklin Institute. Vol. 326. pp. 869-883.

KUROKAWA, K. ‘’Power waves and scattering matrix’’, IEEE Transactions on microwave theory and technique, March 1965, pp. 194-202.

KUROKAWA, K. ‘’an introduction to the theory of microwave circuits’’, N.W. and London: Academic Press, 1969, 431 p.

HichemTaghouti, SabriJmal and AbdelkaderMami, “Joint use of Bond Graph Approach and Scattering Formalism for an Electrical Modeling of Patch Antenna Array”, Research Journal of Applied Sciences, Engineering and Technology, 11(2): 135-143.

Stefan Simon, RomoloMarcelli, Giancarlo Bartolucci, ‘’Composite Right / Left Handed (CRLH) Based Devices for Microwave Applications’’, ISBN 978-953-307-031-5, Published: March 1, 2010 under CC BY-NC-SA 3.0 license.

Jmal, S., Taghouti, H., &Mami, A. 2014. “Modeling and simulation of a patch antenna from its Bond Graph model”. International Conference on Control, Decision and Information Technologies (CoDIT), 2014 (pp. 609-614). IEEE.

Jmal, S., Taghouti, H., &Mami, A. 2013. “A new modeling and simulation methodology of a patch antenna by Bond Graph approach”. International Conference on Electrical Engineering and Software Applications (ICEESA), 2013 (pp. 1-6). IEEE.

F. Martín, F. Falcone, J. Bonache, R. Marqués, M. Sorolla, ’’Split ring resonator based left handed coplanar waveguide”, Appl. Phys. Lett., 83 (2003), pp. 4652–4654.

Taghouti, H., &Mami, A. (2012). ‘’Discussion around the Scattering Matrix Realization of a Microwave Filter using the Bond Graph Approach and Scattering Formalism”. American Journal of Applied Sciences, 9(4).

HichemTaghouti and AbdelkaderMami, “New Extraction Method Of The Scattering Parameters Of A Physical System Starting From Its Causal Bond Graph Model: Application To A Microwave Filter”, Int. J. Phys. Sci. Vol.6 (13), pp. 3016-3030. July2011.

MEHOUACHI, R., TAGHOUTI, H.,& MAMI, A., "Analysis of microstrip patch antenna array by using a new Bond Graph technology ". American Journal of Applied Sciences, 11 (8): 1436-1449, Juin, 2014

V. Veselago, L. Braginsky, V. Shklover, and C. Hafner. “Negative Refractive Index Materials”. ASP Computer Theory Nanoscience, Vol. 3, No. 2, pp. 1-30, 2006.

J. B. Pendry, D. J. Robbins, and W. J. Stewart. “Magnetism from conductors and enhanced nonlinear phenomena”. IEEE Transactions on Microwave Theory and Techniques, 47(11) :2075–2084, 1999.

R. Marqués, F. Mesa, J. Martel, and F. Medina, “Comparative analysis of edge- and broadside-coupled split ring resonators for metamaterial design - theory and experiments”, IEEE Transactions on Antennas and Propagation, vol. 51, pp. 2572–2581, October 2003

Caloz, C. and Itoh, T., “Transmission line approach of left-handed (LH) materials and microstrip implementation of an artificial LH transmission line”, IEEE Transactions on Antennas and Propagation includes theoretical and experimental advances in antennas. Volume:52 , Issue: 5, p.p:1159 – 1166,2004.

C.-Y. Liu, Q.-X. Chu, and J.-Q. Huang, “A Planar D-CRLH and its Application to Bandstop Filter and Leaky-Wave Antenna”, Progress In Electromagnetics Research Letters, Vol. 19, 93-102, 2010.

Jmal, S., Taghouti, H., Mami, A., Design of a Ka band antenna by a new methodology based on bond graph approach, (2015) International Journal on Communications Antenna and Propagation (IRECAP), 5 (5), pp. 301-306.

V. George Eleftheriades and I. Rubaiyat, “Miniaturized microwave components and antennas using negative-refractive-index transmission-line (NRI-TL) metamaterials”, Metamaterials, Vol. 1, Issue 2, pp.53–61,

SamehKhmailia, HichemTaghouti, RiadhMehouachi and AbdelkaderMami, “Application of the reduced bond graph approach to determine the scattering parameters of a matching network of a planar inverted f antenna”, International Journal of Advances in Engineering & Technology, Vol. 3, Issue 2, pp. 77-89. May 2012.

Bahl, I. J. (2003). “Lumped elements for RF and microwave circuits”. Artech house.


Please send any question about this web site to
Copyright © 2005-2023 Praise Worthy Prize