Static and Dynamic Mechanical Properties of Cross-Linked Poly (Tripropyleneglycoldiacrylate)/Liquid Crystal Blends


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


This investigation reports on static and dynamic mechanical properties of cross-linked Poly(tripropyleneglycoldiacrylate) (Poly-TPGDA) networks, elaborated via radical polymerization processes induced by Ultraviolet (UV) radiation. The presence of low molecular weight liquid crystal (LC) molecules in the polymer matrix modifies the dynamic and static mechanical behavior of the obtained composite materials. The storage modulus decreases with increasing LC content in the temperature range from T=25°C to -15°C, due to the plasticizing effect induced by the presence of low molecular weight LC in the polymer matrix. In the case of polymer/LC blends with more than 30 weight (wt.)-% LC and for temperatures lower than -15°C, a reinforcement effect could be seen, leading to a change of the shape of the decreasing curves. This phenomenon interferes with the plasticizing effect which himself governs the whole mechanical behavior of the cured polymer/LC system. A sort of competition takes place especially for temperatures lower than -75°C, so that the storage modulus increases or remains constant between 20 and 60 wt.-% LC
Copyright © 2010 Praise Worthy Prize - All rights reserved.

Keywords


Polymer Network; Acrylate; Liquid Crystal; UV Irradiation; Young Modulus; Storage Modulus

Full Text:

PDF


References


J. P. Fouassier, J. F. Rabek, Radiation Curing in Polymer Science and Technology, Elsevier Applied Science: London, (1993).

S. P. Pappas, UV curing : Science and Technology, Technology Marketing Corporation: Stamford, Connecticut, USA, (1978).

A. Chapiro, Radiation Chemistry of Polymeric Systems, Wiley-Interscience: New York, (1962).

J. G. Drobny, Radiation Technology for Polymers, CRC Press, Boca Raton, Fla., USA, (2003).

C. Decker, Photoinitiated crosslinking polymerisation, Progr. Polym. Sci., 21 (1996), 593-650.

U. Maschke, X. Coqueret, M. Benmouna, Electro-optical properties of polymer dispersed liquid crystals, Macromol. Rapid Comm. 23 (2002), 159-170.

A. Olivier, T. Pakula, B. Ewen, X. Coqueret, M. Benmouna, U. Maschke, Mechanical properties of electron beam cured monomer and monomer/liquid crystal films, Macromol. Mater. Eng. 287 (2002), 656-659.

A. Olivier, L. Benkhaled, T. Pakula, B. Ewen, A. Best, M. Benmouna, U. Maschke, Static and dynamic mechanical behavior of electron-beam cured monomer and monomer/liquid crystal films, Macromol. Mater. Eng. 289 (2004), 1047-1052.

P. S. Drzaic, Liquid Crystal Dispersions, World Scientific, Singapore, (1995).

J. W. Doane, Polymer Dispersed Liquid Crystal Displays in Liquid Crystals: Their Applications and Uses, B. Bahadur, Ed., World Scientific, Singapore, (1990).

Values given by Merck KGaA, Darmstadt, Germany.

A. Charlesby, The effect of crosslinking on the elastic modulus of polythene, Proc. R. Soc. Lon. A 218 (1953), 245-255.

S. Kara Slimane, A. Olivier, T. Bouchaour, B. Carbonnier, T. Pakula, X. Coqueret, M. Benmouna, U. Maschke, Physical properties of electron beam cured tripropyleneglycoldiacryate and liquid crystal systems, Mol. Cryst. Liq. Cryst. 413 (2004), 2137-2144.


Refbacks

  • There are currently no refbacks.



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize