Browse Title Index

Issue Title
Vol 14, No 4 (2021) Numerical Study of the Main Rotor Wake Structures and Induced Velocity Fields at the Tail Rotor Location When Flying Near the Ground Abstract
Yuri Mikhailovich Ignatkin, Pavel Vyacheslavovich Makeev, Alexander Ivanovich Shomov, Valery Andreevich Ivchin
Vol 8, No 6 (2015) Numerical Study of Transonic Flows Using Various Turbulence Models Abstract
N. Bekka, R. Bessaïh, M. Sellam
Vol 12, No 2 (2019) Numerical Validation of NACA 0009 Airfoil in Ultra-Low Reynolds Number Flows Abstract
Aravind Seeni, Parvathy Rajendran
Vol 6, No 5 (2013) On the Advantages of Frequency-Only MIMO Radar Abstract
Yılmaz Kalkan
Vol 6, No 2 (2013) On the Rotational Behaviour of the Euler Equations at High Angles of Attack Abstract
S. E. Razavi, N. Nozari
Vol 7, No 6 (2014) Open-Type Cross-Flow Turbine with Curved Channel (Effect of Channel Angle on Water Surface Stability) Abstract
Yusuke Katayama, Shouichiro Iio, Kaika Kimoto, Salisa Veerapun
Vol 11, No 2 (2018) Optimization of Synchronous Electric Motors with Asynchronous Start by Genetic Algorithms Abstract
Flur Ismagilov, Vyacheslav Vavilov, Ruslan Urazbakhtin
Vol 6, No 4 (2013) Optimization of Wire Electrical Discharge Machining of Hybrid Metal Matrix Composite Material Abstract
S. Ramesh, N. Natarajan
Vol 12, No 4 (2019) Optimization Techniques for Prognostics of On-Board Electromechanical Servomechanisms Affected by Progressive Faults Abstract
Matteo Davide Lorenzo Dalla Vedova, Pier Carlo Berri
Vol 14, No 1 (2021) Over-the-Air Firmware Update for an Educational CubeSat Project Abstract
Maisun Ibn Monowar, Mengu Cho
Vol 9, No 1 (2016) Path Planning for Conflict Resolution in Free Flight System: Optimization Based on Linear Programming Abstract
K. B. Devika, Susy Thomas
Vol 10, No 1 (2017) Performance and Power Quality Improvements of MEA Power Distribution Systems using Model Predictive Control Abstract
Ahmad Eid, Reyad Abdel-Fadil, Mazen Abdel-Salam
Vol 9, No 3 (2016) Performance Evaluation of a Pulse-Doppler Radar with Digital IF Using Modern Technical Computing and CAD Tools Abstract
Soufiane Matah, Lahbib Zenkouar
Vol 11, No 4 (2018) Performance Evaluation of Selected Irradiated Space Structure Composites Manufactured by the Hand Lay-Up Method Abstract
Ahmad Mohamed Anwar, Mahmoud M. Osman, Dalia Elfiky, Gamal Hassan
Vol 7, No 1 (2014) Performance of Corrugated Limiting Tab in Presence of Sharp Corners Abstract
Shantanu Srivastava, Ethirajan Rathakrishnan
Vol 6, No 1 (2013) Performance Prediction for the Fan of the CF6-50 Turbofan Engine at the Off-Design Conditions Abstract
H. Z. Hassan, M. H. Gobran, A. Abd El-Azim
Vol 10, No 4 (2017) Permanent Magnet Generator with the Tooth-Coil Winding and Saturation Magnetization of the Magnetic Core Abstract
Flur Ismagilov, Vyacheslav Vavilov, Denis Gusakov, Nikolai Tarasov
Vol 10, No 3 (2017) Photoelectron Current Measurement in Low Earth Orbit Using a Lean Satellite, HORYU-IV Abstract
Essien Ewang, Akira Miyahara, Arifur R. Khan, Kazuhiro Toyoda, Mengu Cho
Vol 8, No 1 (2015) PIV Study of the Flow Across the Meridional Plane of Rotating Cylinders with Wide Gap Abstract
David S. Adebayo, Aldo Rona
Vol 10, No 5 (2017) Potential of Commercial Human Spaceflight Abstract
A. R. Zahari, F. I. Romli
Vol 9, No 2 (2016) Prediction of Turbulent Swirling Flow in a Combustor Model Abstract
Wahib M. Salim, Saad A. Ahmed
Vol 6, No 2 (2013) Preliminary Design of a Transonic Fan for Low By-Pass Turbofan Engine Abstract
M. A. Aziz, Farouk M. Owis, M. M. Abdelrahman
Vol 11, No 3 (2018) Prognostics of Onboard Electromechanical Actuators: a New Approach Based on Spectral Analysis Techniques Abstract
Dario Belmonte, Matteo Davide Lorenzo Dalla Vedova, Paolo Maggiore
Vol 9, No 3 (2016) Quadratic Optimal Control of Aerodynamic Vectored UAV at High Angle of Attack Abstract
Mubashra Manzoor, Adnan Maqsood, Ammar Hasan
Vol 12, No 6 (2019) Quadrotor Tracking Control Based on Optimized Fuzzy Logic Controller Abstract
Iswanto Iswanto, Faaris Mujaahid, Rohmansyah Rohmansyah, Toha Ardi Nugraha, Vineet Shekher
176 - 200 of 266 Items << < 3 4 5 6 7 8 9 10 11 > >> 

Please send any question about this web site to
Copyright © 2005-2021 Praise Worthy Prize