A New Dynamic Model of a Dual Active Bridge DC-DC Converter
(*) Corresponding author
The paper proposes a new model for a dual active bridge DC-DC converter. The model is developed in time-domain and it takes into account the effective waveform of all the quantities of interest. The paper introduces some algebraic and integral operations useful for modeling the converter defining some “support functions”. Starting by these functions a full analytical model of the DAB is deduced. The effectiveness of the suggested analytical model has been tested and confirmed by simulations and experiments with a 3 kW prototype 28/270 V.
Copyright © 2021 Praise Worthy Prize - All rights reserved.
Z. Biao, S. Qiang, L.Wenhua, and S. Yandong, Overview of dual-active-bridge isolated bidirectional DC-DC converter for high-frequency-link power-conversion system, IEEE Transactions on Power Electronics, vol. 29, no. 8, pp. 4091-4106, Aug. 2014.
Z. Zhang et al., Optimized Modulation Strategy of NH3L-DAB Converter to Minimize RMS Current for Wide Voltage Range Applications, in IEEE Transactions on Power Electronics, vol. 37, no. 7, pp. 7789-7808, July 2022.
S. A. Gorji, H. G. Sahebi, M. Ektesabi and A. B. Rad, Topologies and Control Schemes of Bidirectional DC-DC Power Converters: An Overview, IEEE Access, vol. 7, pp. 117997-118019, 2019.
S. Bhattacharya, T. Zhao, G.Wang, S. Dutta, S. Baek, Y. Du, B. Parkhideh, X. Zhou, and A. Q. Huang, Design and development of generation-i silicon based solid state transformer, in Proc. 25th Annu. IEEE Appl. Power Electron. Conf. Expo., Palm Springs, CA, 2010, pp. 1666-1673.
J. Shi, W. Gou, H. Yuan, T. Zhao, and A. Huang, Research on voltage and power balance control for cascaded modular solid-state transformer, IEEE Trans. Power Electron., vol. 26, no. 4, pp. 1154-1166, Apr. 2011.
S. Inoue and H. Akagi, A bidirectional isolated dc-dc converter as a core circuit of the next-generation medium-voltage power conversion system, IEEE Trans Power Electron., vol. 22, no. 2, pp. 535-542, 2007.
F. Krismer and J. Kolar, Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application, IEEE Trans Ind. Electron., vol. 57, no. 3, pp. 881-891, Mar. 2010.
C. Zhao, S.D.Round, and J.W.Kolar, An isolated three-port bidirectional dc-dc converter with decoupled power ﬂow management, IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2443-2453, 2008.
Brando G., Cervone A., Franzese P., Meo S., Toscano L., Gain scheduling control with minimum-norm pole-placement design of a dual-active-bridge dc-dc converter, (2020) International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020, pp. 846 - 851.
Brando G., Del Pizzo A., Meo S., Model-Reference Adaptive Control of a Dual Active Bridge DC-DC Converter for Aircraft Applications, (2018) International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2018, pp. 502 - 506.
G. Oggier, G. Garci anda, and A. Oliva, Modulation strategy to operate the dual active bridge dc-dc converter under soft switching in the whole operating range, IEEE Trans. Power Electron., vol. 26, no. 4, pp. 1228-1236, Apr. 2011.
X.-F. He, Z. Zhang, Y.-Y. Cai, and Y.-F. Liu, A variable switching frequency hybrid control for ZVS dual active bridge converters to achieve high efficiency in wide load range, 2014 IEEE Appl. Power Electron. Conf. Expo. - APEC 2014, pp. 1095-1099, Mar. 2014.
H. Qin, J. W. Kimball, Generalized Average Modeling of Dual Active Bridge DC-DC Converter, IEEE Transactions on Power Electronics, vol. 27, no. 4, April 2012
Di Noia, L., Del Pizzo, A., Meo, S., Reduced-Order Averaged Model and Non-Linear Control of a Dual Active Bridge DC-DC Converter for Aerospace Applications, (2017) International Review of Aerospace Engineering (IREASE), 10 (5), pp. 259-266.
Meo S., Toscano L., Some new results on the averaging theory approach for the analysis of power electronic converters, (2018) IEEE Transactions on Industrial Electronics, 65 (12), pp. 9367 - 9377.
L. Shi, W. Lei, Z. Li, J. Huang, Y. Cui and Y. Wang, Bilinear Discrete-Time Modeling and Stability Analysis of the Digitally Controlled Dual Active Bridge Converter, in IEEE Transactions on Power Electronics, vol. 32, no. 11, pp. 8787-8799, Nov. 2017.
F. Deng, Y. Lü, C. Liu, Q. Heng, Q. Yu and J. Zhao, Overview on submodule topologies, modeling, modulation, control schemes, fault diagnosis, and tolerant control strategies of modular multilevel converters, in Chinese Journal of Electrical Engineering, vol. 6, no. 1, pp. 1-21, March 2020.
D. G. Holmes and T. A. Lipo, Pulse width modulation for power converters: principles and practice, vol. 18, John Wiley & Sons, 2003.
Y. Xie, J. Sun and J. S. Freudenberg, Power Flow Characterization of a Bidirectional Galvanically Isolated High-Power DC/DC Converter Over a Wide Operating Range, IEEE Transactions on Power Electronics, vol. 25, no. 1, pp. 54-66, 2010.
A. Tong, L. Hang, G. Li, Y. Guo, Y. Zou, J. Chen, J. Li, J. Zhuang and S. Li, Power flow and inductor current analysis of PWM control for Dual Active Bridge converter, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), pp. 1036-1041, 2016.
D. Das and K. Basu, Optimal Design of a Dual-Active-Bridge DC-DC Converter, IEEE Transactions on Industrial Electronics, vol. 68, no. 12, pp. 12034-12045, 2021.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2023 Praise Worthy Prize