Open Access Open Access  Restricted Access Subscription or Fee Access

Technical and Legal Relations in Aviation Industry from Technology Management and Sustainability Perspective

(*) Corresponding author

Authors' affiliations



Technical and legal relations in the production concern certain actions and interactions in a company. Knowledge in this area is essential for proper risk management. In this paper, the relations occurring in the production of aircraft parts responsible for flight safety, taking into account the construction and technological requirements as well as legal aspects were analyzed. The results of the performed analysis were used in building of a system of legal relations in the production of airplane parts. Moreover, problems concerning compliance with legal regulations were analyzed. It has been shown, among others, that it is impossible to eliminate the human factor from the production process. This results in the necessity to carry out awareness, ethical and professional training of the personnel involved in the entire production chain, from the preparation of process documentation to the final product inspection. The study is interdisciplinary in nature, combining the analysis of structural, technological, organizational, and legal issues related to the production of critical aerospace parts.
Copyright © 2022 The Authors - Published by Praise Worthy Prize under the CC BY-NC-ND license.


Technology Management; Aviation Industry; Legal Risk; Compliance System; Sustainable Manufacturing

Full Text:



J. Wallace, S. Tiernan, L. White, Industrial Relations Conflict and Collaboration:. Adapting to a Low Fares Business Model in Aer Lingus, Eur. Manag. J. 24 (2006) 338-347.

L.M. Ellram, M.L. Ueltschy Murfield, Supply chain management in industrial marketing-Relationships matter, Ind. Mark. Manag. 79 (2019) 36-45.

F.P. Appio, S. Lacoste, B2B relationship management in complex product systems (CoPS), Ind. Mark. Manag. 79 (2019) 53-57.

S.K. Hubert Backhaus, D. Nadarajah, Investigating the relationship between industry 4.0 and productivity: A conceptual framework for Malaysian manufacturing firms, Procedia Comput. Sci. 161 (2019) 696-706.

M. Coccia, J. Watts, A theory of the evolution of technology: Technological parasitism and the implications for innovation magement, J. Eng. Technol. Manag. - JET-M. 55 (2020) 101552.

M.M. Kumbure, A. Tarkiainen, P. Luukka, J. Stoklasa, A. Jantunen, Relation between managerial cognition and industrial performance: An assessment with strategic cognitive maps using fuzzy-set qualitative comparative analysis, J. Bus. Res. 114 (2020) 160-172.

A. V. Nebylov, Control technologies and instrumentation in aerospace engineering, IFAC-PapersOnLine. 52 (2019) 472-477.

G. Guglieri, D. Hanus, P. Revel, A Proposal for Ensuring the Quality of Aerospace Engineering Higher Education in Europe, Transp. Res. Procedia. 28 (2017) 207-216.

D. López-Fernández, J.M. Ezquerro, J. Rodríguez, J. Porter, V. Lapuerta, Motivational impact of active learning methods in aerospace engineering students, Acta Astronaut. 165 (2019) 344-354.

R.A. Valdés, V.F.G. Comendador, A.R. Sanz, J.P. Castán, Aviation 4.0: More Safety through Automation and Digitization, Aircr. Technol. (InTech, 2018).

M. El Souri, J. Gao, C. Simmonds, Integrating manufacturing knowledge with design process to improve quality in the aerospace industry, Procedia CIRP. 84 (2019) 374-379.

X. Zhang, Y. Chen, J. Hu, Recent advances in the development of aerospace materials, Prog. Aerosp. Sci. 97 (2018) 22-34.

J. Cao, S. Ding, Sensitivity analysis for safety design verification of general aviation reciprocating aircraft engine, Chinese J. Aeronaut. 25 (2012) 675-680.

OECD Sustainable Manufacturing Toolkit. Seven steps to environmental excellence, 2011.

M.K. Gupta, P.K. Sood, G. Singh, V.S. Sharma, Sustainable machining of aerospace material - Ti (grade-2) alloy: Modeling and optimization, J. Clean. Prod. 147 (2017) 614-627.

T. Balcerzak, Global aerospace industry risks, Sci. J. Silesian Univ. Technol. Ser. Transp. 102 (2019) 5-27.

K.R. Haapala, F. Zhao, J. Camelio, J.W. Sutherland, S.J. Skerlos, D.A. Dornfeld, I.S. Jawahir, H.C. Zhang, A.F. Clarens, A Review of Engineering Research in Sustainable Manufacturing, ASME 2011 Int. Manuf. Sci. Eng. Conf. Vol. 2 (ASME, 2011, pp. 599-619).

L. Rabelo, T. Hughes Speller, Sustaining growth in the modern enterprise: A case study, J. Eng. Technol. Manag. - JET-M. 22 (2005) 274-290.

X. Liang, Z. Liu, Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V, Int. J. Adv. Manuf. Technol. 93 (2017) 1617-1626.

G. Starzyński, The surface layer and its modeling (org. Warstwa wierzchnia i jej modelowanie), VII Semin. Nt. Nieniszcz. Badania Mater. Zakopane, 2002, p. 19.

Polish Norm: The surface layer. Terminology (org. Warstwa wierzchnia. Terminologia) - PN-87/M-04250 (withdrawn).

K. Krupa, Forming the surface layer and qualitay indicators in the finish turning of titanium alloy based on intermetallic phase TiAl(γ) (org. Kształtowanie warstwy wierzchniej oraz wskaźniki jakościowe obróbki w procesie toczenia wykończeniowego stopu tytanu na osnowie fazy międzymetalicznej TiAl(γ)), Ph.D. dissertation, Faculty of Mechanical Engineering and Aeronautics. Rzeszow University of Technology, 2015.

V.P. Astakhov, Surface Integrity - Definition and Importance in Functional Performance, Surf. Integr. Mach. (Springer London, London, 2010, pp. 1-35).

G.M. Krolczyk, R.W. Maruda, J.B. Krolczyk, P. Nieslony, S. Wojciechowski, S. Legutko, Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions, Measurement. 121 (2018) 225-239.

G.M. Królczyk, S. Legutko, Experimental analysis by measurement of surface roughness, Metrolgy Meas. Syst. XXI (2014) 759-770.

S. Mahovic Poljacek, D. Risovic, K. Furic, M. Gojo, Comparison of fractal and profilometric methods for surface topography characterization, Appl. Surf. Sci. 254 (2008) 3449-3458.

S.S. Bosheh, P.T. Mativenga, White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, Int. J. Mach. Tools Manuf. 46 (2006) 225-233.

W. Grzesik, B. Kruszynski, A. Ruszaj, Surface Integrity of Machined Surfaces, Surf. Integr. Mach. (Springer London, London, 2010, pp. 143-179).

G.M. Królczyk, S. Legutko, Experimental analysis by measurement of surface roughness variations in turning process of Duplex stainless steel, Metrol. Meas. Syst. XXI (2014) 759-770.

G. Krolczyk, S. Legutko, A. Stoic, Influence of cutting parameters and conditions onto surface hardness of Duplex Stainless Steel after turning process, Teh. Vjesn. - Tech. Gaz. 20 (2013) 1077-1080.

S.A. Martinez, S. Sathish, M.P. Blodgett, M.J. Shepard, Residual stress distribution on surface-treated Ti-6Al-4V by X-ray diffraction, Exp. Mech. 43 (2003) 141-147.

L. Wagner, Mechanical surface treatments on titanium, aluminum and magnesium alloys, Mater. Sci. Eng. 263 (1999) 210-216.

L. Xie, Y. Wen, L. Wang, C. Jiang, V. Ji, Characterization on Surface Properties of Ti-6Al-4V After Multiple Shot Peening Treatments, J. Eng. Mater. Technol. 138 (2016) 041005.

W. Grzesik, P. Niesłony, W. Habrat, J. Sieniawski, P. Laskowski, Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement, Tribol. Int. 118 (2018) 337-346.

B. Toubhans, G. Fromentin, F. Viprey, H. Karaouni, T. Dorlin, Machinability of inconel 718 during turning: Cutting force model considering tool wear, influence on surface integrity, J. Mater. Process. Technol. 285 (2020) 116809.

Q. Yin, Z. Liu, B. Wang, Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums, J. Alloys Compd. 876 (2021) 160186.

R. D'Amato, C. Wang, R. Calvo, P. Valášek, A. Ruggiero, Characterization of vegetable oil as cutting fluid, Procedia Manuf. (Elsevier B.V., 2019, pp. 145-152).

A. Ruggiero, R. D'Amato, E. Gómez, M. Merola, Experimental comparison on tribological pairs UHMWPE/TIAL6V4 alloy, UHMWPE/AISI316L austenitic stainless and UHMWPE/AL2O3 ceramic, under dry and lubricated conditions, Tribol. Int. 96 (2016) 349-360.

D. Habrat, Legal challenges of digitalization and automation in the context of Industry 4.0, Procedia Manuf. 51 (2020) 938-942.

D. Habrat, D. Stadnicka, W. Habrat, Analysis of the Legal Risk in the Scientific Experiment of the Machining of Magnesium Alloys, Adv. Manuf. Eng. Mater. Lect. Notes Mech. Eng. (Springer, Cham, 2019, pp. 421-430).

D. Stadnicka, K. Sakano, Employees Motivation and Openness for Continuous Improvement: Comparative Study in Polish and Japanese Companies, Manag. Prod. Eng. Rev. 8 (2017) 70-86.


  • There are currently no refbacks.

Please send any question about this web site to
Copyright © 2005-2024 Praise Worthy Prize