Modern Methodology for the Design of Advanced Electrical Machines and Electronics Units Based on FMEA Concept

Leonid A. Luzgin; Flur R. Ismagilov; Vyacheslav E. Vavilov; Rafail Sh. Valiev; Ruslan R. Urazbakhtin

doi:10.15866/irease.v14i6.20632

Modern Methodology for the Design of Advanced Electrical Machines and Electronics Units Based on FMEA Concept

Leonid A. Luzgin⁽¹⁾, Flur R. Ismagilov⁽²⁾, Vyacheslav E. Vavilov⁽³⁾, Rafail Sh. Valiev⁽⁴⁾, Ruslan R. Urazbakhtin^(5*)

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/irease.v14i6.20632

Abstract

In this work, a methodology for choosing the modern and advanced electrical machines and electronic units’ concept, based on FMEA, has been developed. The developed methodology for choosing the electrical machine and the electronic unit concept allows minimizing the probability of making an error at the initial stage of electrical machine and electronic unit design. As an example, the application of the developed methodology for choosing the modern and advanced electrical machine concept for small-sized aircraft generator has been considered. In order to verify the developed methodology for choosing the electrical machines and the electronic units’ concept, the small-sized aircraft generator has been designed according to the selected concept and the small-sized aircraft generator experimental studies have been carried out. The research results have proved the relevance of the application of the developed methodology for choosing the modern and the advanced electrical machines and electronic units’ concept.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords

Electrical Machine; Electronic Unit; Failure Modes and Effects Analysis; Small-Sized Aircraft Generator; Modern and Advanced Electrical Machines Design

Full Text:

PDF

References

Ekmekçioğlu M., Can Kutlu A. A fuzzy hybrid approach for fuzzy process FMEA: An application to a spindle manufacturing process, International Journal of Computational Intelligence Systems. - 2012. - Vol. 5. - №. 4. - P. 611-626.
https://doi.org/10.1080/18756891.2012.718104

Reiling J. G., Knutzen B. L., Stoecklein M. FMEA-the cure for medical errors, Quality progress. - 2003. - Vol. 36. - №. 8. - P. 67-71.

Patil, R., Kothavale, B., Failure Modes and Effects Analysis (FMEA) of Computerized Numerical Control (CNC) Turning Center, (2018) International Review of Mechanical Engineering (IREME), 12 (1), pp. 78-87.
https://doi.org/10.15866/ireme.v12i1.14156

Zaitar, Y., Risk Assessment in ERP Projects Life Cycle: the Application of FMEA Approach, (2014) International Review on Computers and Software (IRECOS), 9 (11), pp. 1888-1895.
https://doi.org/10.15866/irecos.v9i11.4466

Peeters J. F. W., Basten R. J. I., Tinga T. Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner, Reliability engineering & system safety, 2018, Vol. 172, P. 36-44.
https://doi.org/10.1016/j.ress.2017.11.024

Park G. Y., Kim D. H., Lee D. Y. Software FMEA analysis for safety-related application software, Annals of Nuclear Energy. - 2014. - Vol. 70. - P. 96-102.
https://doi.org/10.1016/j.anucene.2014.02.025

Yang S. et al. Optimized fault diagnosis based on FMEA-style CBR and BN for embedded software system, The International Journal of Advanced Manufacturing Technology. - 2018. - Vol. 94. - №. 9-12. - P. 3441-3453.
https://doi.org/10.1007/s00170-017-0110-y

Geramian A. et al. Fuzzy inference system application for failure analyzing in automobile industry, International Journal of Quality & Reliability Management. - 2017.
https://doi.org/10.1108/IJQRM-03-2016-0026

Dmitriev A. Y., Zagidulin R. S., Mitroshkina T. A. Special Aspects of Quality Assurance in the Design, Manufacture, Testing of Aerospace Engineering Products, IOP Conference Series: Materials Science and Engineering. - IOP Publishing, 2020. - Vol. 714. - №. 1. - P. 012006.
https://doi.org/10.1088/1757-899X/714/1/012006

Press D. Guidelines for failure mode and effects analysis (FMEA), for automotive, aerospace, and general manufacturing industries. - CRC Press, 2003.
https://doi.org/10.1201/9780203009680

North American Aviation, Space and Information System Division, SID-62-203-R-1, Apollo reliability Program Plan, 15 May 1963.

B.G.Dale, P.Shaw. Failure Mode and Effects Analysis in the U.K. Motor Industry: A State of the Art Study - Quality & Reliability Engineering International, 1990, v.6, p.179-188.
https://doi.org/10.1002/qre.4680060304

Ismagilov, F., Vavilov, V., Valiev, R., Urazbakhtin, R., FMEA Application in the Design and Manufacture of Modern and Advanced Electrical Machines, (2021) International Review of Aerospace Engineering (IREASE), 14 (3), pp. 147-158.
https://doi.org/10.15866/irease.v14i3.19644

Ismagilov F. et al. The main aspects of the FMEA usage in the design of modern and advanced electrical machines //2020 International Conference on Electrotechnical Complexes and Systems (ICOECS). - IEEE, 2020. - P. 1-4.
https://doi.org/10.1109/ICOECS50468.2020.9278407

Lo H. W. et al. A novel failure mode and effect analysis model for machine tool risk analysis, Reliability Engineering & System Safety, 2019, Vol. 183, P. 173-183.
https://doi.org/10.1016/j.ress.2018.11.018

Yazdi M. Improving failure mode and effect analysis (FMEA) with consideration of uncertainty handling as an interactive approach International Journal on Interactive Design and Manufacturing (IJIDeM), 2019, Vol. 13, №. 2, P. 441-458.
https://doi.org/10.1007/s12008-018-0496-2

Huang J., Li Z. S., Liu H. C. New approach for failure mode and effect analysis using linguistic distribution assessments and TODIM method, Reliability Engineering & System Safety, 2017, Vol. 167, P. 302-309.
https://doi.org/10.1016/j.ress.2017.06.014

Xu K. et al. Fuzzy assessment of FMEA for engine systems, Reliability Engineering & System Safety. - 2002. - Vol. 75. - №. 1. - P. 17-29.
https://doi.org/10.1016/S0951-8320(01)00101-6

Meo, S., MADES Tool for the Analysis and Design of Electrical Machines, (2017) International Review of Aerospace Engineering (IREASE), 10 (4), pp. 240-249.
https://doi.org/10.15866/irease.v10i4.13779

Vahedi, A., Meo, S., Zohoori, A., An AHP-based approach for design optimization of flux-switching permanent magnet generator for wind turbine applications, (2016) International Transactions on Electrical Energy Systems, 26 (6), pp. 1318-1338.
https://doi.org/10.1002/etep.2149

Zohoori, A., Vahedi, A., Meo, S., Sorrentino, V., An Improved AHP Method for Multi-Objective Design of FSPM Machine for Wind Farm Applications, (2016) Journal of Intelligent and Fuzzy Systems, 30 (1), pp. 159-169.
https://doi.org/10.3233/IFS-151742

https://ntrs.nasa.gov/citations/20190026443

Ismagilov F.R., Vavilov V.E., Valiev R.Sh., Urazbakhtin R.R. A systematic approach to the design of aircraft electrical machines - M.: "Publishing house" Innovative mechanical engineering", 2021. - 307 p.

Dezhin D. S., Ilyasov R. I., Kovalev K. L. HTS inductor electric machine with combined excitation, IOP Conference Series: Earth and Environmental Science. - IOP Publishing, 2018. - Vol. 194. - №. 5. - P. 052007.
https://doi.org/10.1088/1755-1315/194/5/052007

Bagheri M., Farjah E., Ghanbari T. Selective Utilized Phase Number of Multiphase Induction Motors Strategy to Enhance Electric Vehicles' Drive Range, 2021 12th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC). - IEEE, 2021. - P. 1-5.
https://doi.org/10.1109/PEDSTC52094.2021.9405866

Papini, L. A high-speed permanent-magnet machine for fault-tolerant drivetrains / L. Papini, T. Raminosoa, D. Gerada, C. Gerada, IEEE Trans. Ind. Electron. - 2013 - Vol. 61, № 6. - P. 3071-3080.
https://doi.org/10.1109/TIE.2013.2282604

Gerling, D. Six-Phase Electrically Excited Synchronous Generator for More Electric Aircraft, D. Gerling, M. Alnajjar, Int. Symp. on Power Electron., Elect. Drives, Automat. and Motion (SPEEDAM), 16193041. 2016, - P. 7-13.

Elomary, I., Ahmed, A., Lhassane, I., Optimization Design of the BLDC Motor Using Backtracking Search Algorithm, (2021) International Review of Electrical Engineering (IREE), 16 (2), pp. 167-173.
https://doi.org/10.15866/iree.v16i2.17411

Arumugam, P. Permanent Magnet Starter-Generator for Aircraft Application / P. Arumugam, C. Gerada, S. Bozhko, H. Zhang, et al., SAE Tech. - 2014. - P. 2014-01-2157.
https://doi.org/10.4271/2014-01-2157

Ismagilov, F. R. Multidisciplinary Design of Ultra-High-Speed Electrical Machines / F. R. Ismagilov, N. Uzhegov, V. E. Vavilov, V. I. Bekuzin, V. V. Ayguzina, IEEE Trans. Energy Convers. - 2018. - Vol. 33, №3. P. 1203-1212.
https://doi.org/10.1109/TEC.2018.2803146

Yeoh S. S. et al. Permanent-magnet machine-based starter-generator system with modulated model predictive control, IEEE transactions on transportation electrification. - 2017. - Vol. 3. - №. 4. - P. 878-890.
https://doi.org/10.1109/TTE.2017.2731626

Ismagilov F. R., Vavilov V. E., Gusakov D. V. High-Speed Starter-Generator for Aerospace Applications: Design and Initial Testing, 2018 XIII International Conference on Electrical Machines (ICEM). - IEEE, 2018. - P. 2593-2599.
https://doi.org/10.1109/ICELMACH.2018.8507246

Ismagilov F., Vavilov V., Urazbakhtin R. Design of the "integrated into an aircraft engine starter-generator-dual-flow turbojet engine" system as a part of the electrified aircraft engine concept creation, 2020 International Conference on Electrotechnical Complexes and Systems (ICOECS). - IEEE, 2020. - P. 1-6.
https://doi.org/10.1109/ICOECS50468.2020.9278456

Cavagnino A., Li Z., Tenconi A., Vaschetto S., Integrated generator for more electric engine: Design and testing of a scaled-size prototype IEEE Transactions on Industry Applications, vol. 49, no. 5, pp. 2034 - 2043, 2013.
https://doi.org/10.1109/TIA.2013.2259785

Nikul'Chenkov N.N., Danilov S.V., Cherepanov K.E., Lobanov M.L. Heat treatment parameters optimization for magnetic cores of amorphous finemet alloy, AIP Conference Proceedings Volume 2174, 6 December 2019, paper №020145.
https://doi.org/10.1063/1.5134296

Aliaga, L., Alvarez, E., Bastos, I., Platt, G., Bolfarini, C., Characterization of Ni61.0Nb35.5B3.0Si0.5 Alloy in Fully Amorphous and Partially Crystallized Conditions, (2017) International Review of Chemical Engineering (IRECHE), 9 (3), pp. 49-54.

Zhu J., Cao J., Liu R., Ding Y. Comparative Analysis of Silicon Steel and Amorphous on the Performance of Permanent Magnet Synchronous Motors on Electric Vehicles, Transactions of China Electrotechnical Society Volume 33, 31 December 2018, Pages 352-358.

Brando G., Del Pizzo A., Di Noia L. P., Meo S., "Second order variable structure control for wind turbine PMSG-based and generator-side converter system," 2017 IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), 2017, pp. 797-801.

https://doi.org/10.1109/ICRERA.2017.8191169

Najafi A., Iskender I. Comparison of core loss and magnetic flux distribution in amorphous and silicon steel core transformers Electrical Engineering Volume 100, Issue 2, 1 June 2018, Pages 1125-1131.
https://doi.org/10.1007/s00202-017-0574-7

Ismagilov F.R., Papini L., Vavilov V.E., Gusakov, D.V. Design and Performance of a High-Speed Permanent Magnet Generator with Amorphous Alloy Magnetic Core for Aerospace Applications IEEE Transactions on Industrial Electronics Volume 67, Issue 3, March 2020, Pages 1750-1758.
https://doi.org/10.1109/TIE.2019.2905806

Liu Y., Ou J., Schiefer M., Breining P., Grilli F., Doppelbauer M. Application of an Amorphous Core to an Ultra-High-Speed Sleeve-Free Interior Permanent-Magnet Rotor IEEE Transactions on Industrial Electronics Volume 65, Issue 11, November 2018, Pages 8498-8509.
https://doi.org/10.1109/TIE.2018.2807418

Ismagilov F.R., Vavilov V.E., Gusakov D.V., Ou J. High-speed generator with tooth-coil winding, permanent magnets and new design of a stator magnetic core made from amorphous alloy 2018 25th International Workshop on Electric Drives: Optimization in Control of Electric Drives, IWED 2018 - Proceedings Volume 2018-January, 21 March 2018, Pages 1-5.
https://doi.org/10.1109/IWED.2018.8321395

Liu D., Li J., Noubissi R.K., Wang, S., Xu X., Liu Q. Magnetic properties and vibration characteristics of amorphous alloy strip and its combination IET Electric Power Applications Volume 13, Issue 10, 1 October 2019, Pages 1589-1597.
https://doi.org/10.1049/iet-epa.2019.0137

Chen P., Chen J., Liao Y., Zhang C., Du, J. Vibration and Noise of High Speed Amorphous Alloy Permanent Magnet Synchronous Motor 21st International Conference on Electrical Machines and Systems 27 November 2018, Pages 318-322.
https://doi.org/10.23919/ICEMS.2018.8549464

Refbacks

There are currently no refbacks.

Username
Password
Remember me