Multi-Disciplinary Design of High-RPM Electric Generator with External Rotor for Unmanned Aerial Vehicle

Vyacheslav Vavilov; Flur Ismagilov; Irek Khayrullin; Ruslan Karimov

doi:10.15866/irease.v9i4.10340

Multi-Disciplinary Design of High-RPM Electric Generator with External Rotor for Unmanned Aerial Vehicle

Vyacheslav Vavilov⁽¹⁾, Flur Ismagilov⁽²⁾, Irek Khayrullin⁽³⁾, Ruslan Karimov^(4*)

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/irease.v9i4.10340

Abstract

The article describes the main approaches for the design of high-speed electric generators in unmanned aerial vehicles. Two generators for unmanned aerial vehicles with power of 2.3 and 3.3 kW were calculated at rotor speeds of 48,000 and 60,000 rpm respectively. Losses in these electric generators were estimated, and their heat calculations were made, as well as the calculations of rotor dynamics. The results can be used in practice for the creation of new prospective UAVs.
Copyright © 2016 Praise Worthy Prize - All rights reserved.

Keywords

High-rpm Electric Generator with External Rotor; Unmanned Aerial Vehicle; UAV Power Supply System

Full Text:

PDF

References

Larbi, M., Meguenni, K., Meddahi, Y., Litim, M., Nonlinear Observer and Backstepping Control of Quadrotor Unmanned Aerial Vehicle, (2013) International Review of Aerospace Engineering (IREASE), 6 (5), pp. 233-242.

Benzerrouk, H., Salhi, H., Nebylov, A., Non-Gaussian Sensor Fusion Analysis with “Gaussian Mixture and Adaptive” Based Cubature Kalman Filtering for Unmanned Aerial Vehicle, (2013) International Review of Aerospace Engineering (IREASE), 6 (6), pp. 264-277.

Ammar, Y., Boudghene Stambouli, A., Bekhti, M., Design and Optimization of Microsatellite Power System, (2015) International Review of Aerospace Engineering (IREASE), 8 (4), pp. 141-150.
https://doi.org/10.15866/irease.v8i4.7334

Uzhegov N., Kurvinen E., Nerg, J., Sopanen, J.T., Shirinskii, S. Multidisciplinary Design Process of a 6-Slot 2-Pole High-Speed Permanent-Magnet Synchronous Machine // IEEE Transactions on Industrial Electronics
http://dx.doi.org/10.1109/tie.2015.2477797

http://www.hirth-engines.de/index.php/de/uav-menu

Yun, J., Cho, S., Cong Liu, H. Lee, H.-W. Lee, J. Design of electromagnetic field of permanent magnet generator for VTOL series-hybrid UAV 2015 18th International Conference on Electrical Machines and Systems, ICEMS 2015 18 January 2016, pp. 83-86
http://dx.doi.org/10.1109/icems.2015.7385004

Cunningham, C.S., Ransom, D., Wilkes, J., Bishop, J., White, B. Mechanical design features of a small gas turbine for power generation in unmanned aerial vehicles Proceedings of the ASME Turbo Expo, Volume 8, 2015
http://dx.doi.org/10.1115/gt2015-43491

Rjckard R. Secttnde, Robert P. Macosko, David S. Repas Integrate Engine–generator concept for aircraft electric secondary power national aeronautics and space administration // Washington, D. C., June 1972, NASA/TM X 2579, pp 22.
http://dx.doi.org/10.2172/4463088

Frederick G. Harmon, Andrew Alfonso Frank, J.J. Chattot Conceptual Design and Simulation of a Small Hybrid-Electric Unmanned Aerial Vehicle // Journal of Aircraft 43(5):1490-1498 • September 2006
http://dx.doi.org/10.2514/1.15816

Nukki, R.,Kilk, A.,Kallaste, A.,Vaimann, T.,Tiimus Sr., K. Exterior-rotor permanent magnet synchronous machine with toroidal windings for unmanned aerial vehicles // 9th International: 2014 Electric Power Quality and Supply Reliability Conference, PQ 2014 - Proceedings, 2014, pp. 215 – 220
http://dx.doi.org/10.1109/pq.2014.6866813

Tosetti M.,Maggiore P.,Cavagnino A.,Vaschetto S. Conjugate heat transfer analysis of integrated brushless generators for more electric engines// 5th Annual IEEE Energy Conversion Congress and Exhibition.ECCE 2013; Denver, CO; United States; 15 September 2013through19 September 2013. Pp. 1518…1525.
http://dx.doi.org/10.1109/ecce.2013.6646885

Bojoi, R.,Cavagnino, A.,Tenconi, A.,Vaschetto, S. Control of shaft-line-embedded multiphase starter/generator for aero-engine. IEEE Transactions on Industrial Electronics , 2016, 641 - 652
http://dx.doi.org/10.1109/tie.2015.2472637

Cavagnino A.,Li Z.,Tenconi A.,Vaschetto S. Integrated generator for more electric engine: Design and testing of a scaled-size prototype// IEEE Transactions on Industry Applications.2013. Vol. 49. Issue 5.Pp. 2034…2043.
http://dx.doi.org/10.1109/tia.2013.2259785

Erich Schmidt, Andreas Eilenberger Finite Element Analysis of an External Rotor Permanent Magnet Synchronous Machine with Star- and Delta-Connected Tooth Coil Windings // XIX International Conference on Electrical Machines - ICEM 2010, Rome
http://dx.doi.org/10.1109/icelmach.2010.5608233

Moayed-Jahromi, H., Rahideh, A., Mardaneh, M. 2-D Analytical Model for External Rotor Brushless PM Machines // IEEE Transactions on Energy Conversion Volume 31, Issue 3, September 2016, Pp. 1100-1109
http://dx.doi.org/10.1109/tec.2016.2524538

Virtič, P.,Vražić, M., Papa, G. Design of an axial flux permanent magnet synchronous machine using analytical method and evolutionary optimization // IEEE Transactions on Energy Conversion Volume 31, Issue 1, March 2016, Pp. 150-158
http://dx.doi.org/10.1109/tec.2015.2477319

Gurakuq Dajaku, Sachar Spas, Xhevat Dajaku, and Dieter Gerling “Comparison of Two FSCW PM Machines for Integrated Traction Motor/Generator”, 2015 IEEE International Electric Machines & Drives Conference (IEMDC) pp. 187–194
http://dx.doi.org/10.1109/iemdc.2015.7409058

Haerri, V.V., Lindegger, M., Neumaier, M. A novel interior permanent synchronous motor for a high end ebike drive chain // 5th International Conference on Electric Drives Production, EDPC 2015; Nuremberg; Germany; 15 September 2015 through 16 September 2015
http://dx.doi.org/10.1109/edpc.2015.7323228

David G Dorrell, David A Staton, Malcolm I McGilp Design of Brushless Permanent Magnet Motors - A Combined Electromagnetic and Thermal Approach to High Performance Specification // IEEE Industrial Electronics, IECON 2006 - 32nd Annual Conference on
http://dx.doi.org/10.1109/iecon.2006.348105

Ján V, Kianicová M, Ján V.. Modal and frequency analysis for rotor blades of turbo–jet engine TJ 100 // University Review, Vol. 7, 2013, No. 4, p. 47–50 12.
http://dx.doi.org/10.1515/tjj.2003.20.1.17

Caleb S. Cunningham, David Ransom, Jason Wilkes, John Bishop Mechanical Design Features of a Small Gas Turbine for Power Generation in Unmanned Aerial Vehicles // ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, June 15–19, 2015
http://dx.doi.org/10.1115/gt2015-43491

V.C. Koo, Y.K. Chan, V. Gobi: A new unmanned aerial vehicle synthetic aperture radar for environmental monitoring // Progress In Electromagnetics Research. Vol. 122. 2012. P. 245–268.
http://dx.doi.org/10.2528/pier11092604

Ismagilov, F., Khairullin, I., Vavilov, V., Karimov, R., Gorbunov, A., Features of Designing High-Rpm Electromechanical Energy Converters Operating in Short-Term Mode with High-Coercivity Permanent Magnets, (2016) International Review of Electrical Engineering (IREE), 11 (1), pp. 28-35.
http://dx.doi.org/10.15866/iree.v11i1.8131

Ismagilov F. R. , Khayrullin I., Vavilov V., Yakupov A. M., Method of Designing High-Speed Generators for the Biogas Plant // International Journal of Renewable Energy Research Vol.6, No.2, 2016
http://dx.doi.org/10.15866/iree.v9i5.3148

Co Huynh, Liping Zheng, Dipjyoti Acharya Losses in High Speed Permanent Magnet Machines Used in Microturbine Applications // J. of Engineering for Gas Turbines and Power. 2009.Vol. 131, Issue 2. p. 1-6.
http://dx.doi.org/10.1115/1.2982151

Refbacks

There are currently no refbacks.

Username
Password
Remember me