MADES Tool for the Analysis and Design of Electrical Machines

Santolo Meo

doi:10.15866/irease.v10i4.13779

MADES Tool for the Analysis and Design of Electrical Machines

Santolo Meo^(1*)

^(*) Corresponding author

Authors' affiliations

DOI: https://doi.org/10.15866/irease.v10i4.13779

Abstract

In this paper, a numerical tool is presented in the field of the computation of electrical unknown of an electrical machine, very suitable to solve non-symmetrical condition too by means of a very friendly computer evaluation. This software tool, written in MATLAB language, bases itself on a formulation of air-gap field distribution by means of the linear combinations of the most elementary components of m.m.f (in case of windings) or of flux density (in case of permanent magnets) called Window functions. Differently from the standard methods, that allow appreciable results only after laborious calculations and complicate mathematical approaches that consent to formulate the problem in convenient domain, the proposed technique approaches and solves any problem directly in the time domain. The other most important feature of this procedure is its easy implementation into a proper tool that allows a friendly utilisation both by non expert people and by specialists in design phase activity or during the computation of performances in transient operations or in test conditions. In the paper, this tool is proposed in order to solve three cases of electrical machines simulations: the results demonstrate the interesting performance of the proposed tool.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords

Electrical Machines; Design; Analysis; Modeling Tools

Full Text:

PDF

References

E Clarke :Circuit analysis of a.c. power systems, Vol. I Symmetrical and related components, Wiley, New York 1943.

G. Kron : Equivalent circuits of electrical machinery, Dover, New York 1967.

J. Stepina, RaumzeigeralsGrundlage der Theorie der ElektrischenMaschinen, ElektrotechnischeZeitschift A 1967.

L. Schwartz, Theorie des distributions, Hermann - Cie, Paris vol. 1,2 ; 1957.

G. D’ Angelo, S. Meo, M. Scarano : A new software tool for analysis and design of induction machines, Third International Conference on Software for Electrical Engineering Analysis and Design ELECTROSOFT96 Proc., 28-30 May 1996 San Miniato Italy.

S. Meo,M. Scarano: A new formulation of the mathematical model for non traditional electrical machines by means of window functions, ICEMA Proc., Adelaide (Australia), 14-16 Sept. 1993.

V. Isastia, S. Meo, M. Scarano: A new formulation of the mathematical model of induction machines by means of window function, International Conference on Electrical Machines (ICEM '94) Proc., Paris (F), 5-8- Sept. 1994.

S. Meo,M. Scarano :Analysis of a dissimetrical actuator by window functions, Proc. of International Symposium on Electromagnetic Fields in Electrical Engineering, 25-27 Sept. 1995, Thessaloniki, Greece.

Isastia, V., Meo, S., Scarano, M.:Mathematical Model of A Pm-Dc Brushless Homopolar Motor", Universities Power Engineering Conference, UPEC '93 Proc., Stafford - UK., 21-23 Sept. 1993.

Isastia, V., Meo, S., M. Scarano, A New Mathematical Approach Oriented to Friendly Computer Evaluation of Air-Gap Functions of Induction Machines, Ratio Mathematica 11 (1996), pp. 3-21.

V. Delli Colli, M. Scarano, S. Meo “One and two dimensional numerical codes for linear induction machines.”, Conference on Software for Electrical Engineering Analysis Design ELECTROSOFT. p. 99-110, ISBN: 1853126845, Siviglia, (Spain), 17-19/09/99.

Damiano, A., Gatto, G., Marongiu, I., Meo, S., Perfetto, A., Serpi, A., A predictive direct torque control of induction machines, (2012) International Review of Electrical Engineering (IREE), 7 (4), pp. 4837-4844.

Gatto, G., Marongiu, I., Meo, S., Perfetto, A., Comparison among different voltage feeding algorithms for quasi-resonant DC link inverter-fed I. M. drives based on state feedback approach, (2011) International Review on Modelling and Simulations (IREMOS), 4 (4), pp. 1506-1512.

Filippetti, F., Franceschini, G., Ometto, A., Meo, S., Survey of neural network approach for induction machine on-line diagnosis, (1996) Proceedings of the Universities Power Engineering Conference, 1, pp. 17-20.

Gentile, G., Meo, S., Ometto, A., Induction motor current signature analysis to diagnostics, of stator short circuits, (2003) IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2003 - Proceedings, art. no. 1234545, pp. 47-51.
http://dx.doi.org/10.1109/demped.2003.1234545

Meo, S., Ometto, A., Rotondale, N., Diagnostic-oriented modelling of induction machines with stator short circuits, (2012) International Review on Modelling and Simulations (IREMOS), 5 (3), pp. 1202-1209.

Prakash, P., Aravindhababu, P., Harmony Search Optimization Based Design of Cost Effective Induction Motor, (2014) International Review on Modelling and Simulations (IREMOS), 7 (6), pp. 912-917.
http://dx.doi.org/10.15866/iremos.v7i6.4866

Kammoun, J., Ben Hadj, N., Ghariani, M., Neji, R., Torque Ripple and Harmonic Density Current Study in Induction Motor: Two Rotor Slot Shapes, (2015) International Review on Modelling and Simulations (IREMOS), 8 (2), pp. 197-204.
http://dx.doi.org/10.15866/iremos.v8i2.5568

Abid, A., Ben Hamed, M., Sbita, L., Multimodel Modeling of Doubly Fed Induction Motor, (2014) International Review on Modelling and Simulations (IREMOS), 7 (2), pp. 238-244.

Zohoori, A., Vahedi, A., Noroozi, M. A., Meo, S. “A new outer-rotor flux switching permanent magnet generator for wind farm applications.”, Wind Energy, vol. 20, p. 3-17, ISSN: 1099-1824.
http://dx.doi.org/10.1002/we.1986

Zohoori, A., Vahedi, A., Meo, S., Sorrentino, V. “An Improved AHP Method for Multi-Objective Design of FSPM Machine for Wind Farm Applications.”, Journal Of Intelligent And Fuzzy Systems, vol. 30, p. 159-169, ISSN: 1064-1246.
http://dx.doi.org/10.3233/ifs-151742

Meo, S., Zohoori, A., Vahedi, A. “ Optimal design of permanent magnet flux switching generator for wind applications via artificial neural network and multi-objective particle swarm optimization hybrid approach.”, Energy Conversion And Management, vol. 110, p. 230-239, ISSN: 0196-8904.
http://dx.doi.org/10.1016/j.enconman.2015.11.062

Vahedi, A., Meo, S., Zohoori, A. “An AHP-based approach for design optimization of flux-switching permanent magnet generator for wind turbine applications.” International Transactions on Electrical Energy Systems, vol. 26, p. 1318-1338, ISSN: 2050-7038.
http://dx.doi.org/10.1002/etep.2149

Zaineb, B., Aicha, A., Mouna, B., Sbita, L., Faults Detection of Nonlinear NCS Subject to Times Delays Using Multi-Model Approach: Application to Induction Motor, (2014) International Review of Electrical Engineering (IREE), 9 (2), pp. 280-289.

Utrata, G., Rolek, J., Kaplon, A., The Genetic Algorithm for an Electromagnetic Parameters Estimation of an Induction Motor Secondary Multi-Loop Equivalent Circuit, (2014) International Review of Electrical Engineering (IREE), 9 (6), pp. 1111-1118.
http://dx.doi.org/10.15866/iree.v9i6.4599

Bazi, S., Nait Said, M., Extreme Learning Machines and Particle Swarm Optimization for Induction Motor Faults Detection and Classification, (2015) International Review of Electrical Engineering (IREE), 10 (4), pp. 501-509.
http://dx.doi.org/10.15866/iree.v10i4.7048

Barta, J., Uzhegov, N., Ondrusek, C., Pyrhönen, J., High-Speed Electrical Machine Topology Selection for the 6kW, 120 000 rpm Helium Turbo-Circulator, (2016) International Review of Electrical Engineering (IREE), 11 (1), pp. 36-44.
http://dx.doi.org/10.15866/iree.v11i1.7687

Refbacks

There are currently no refbacks.

Username
Password
Remember me