| Issue | Title | |
| Vol 1, No 4 (2013) | A Review on Thermal Behavior Aspects of Nickel-Tungsten Alloy Coating | Abstract |
| U. Arunachalam, P. Veeramani, N. Shenbaga Vinnayaga Moorthi | ||
| Vol 1, No 1 (2013) | Analysis and Numerical Modelling of Ceramic Piezoelectric Beam Behavior Under the Effect of External Solicitations | Abstract |
| A. Lebied, B. Necib | ||
| Vol 1, No 4 (2013) | Analytical and Experimental Investigation on Cutting Temperature in Turning AISI 304 Austenitic Stainless Steel Using AlTiCrN Coated Carbide Insert | Abstract |
| Atul P. Kulkarni, Girish G. Joshi, Amit Karekar, Vikas G. Sargade | ||
| Vol 1, No 1 (2013) | Application Free Vibration for Two Type Functionally Graded Cylindrical Shell Composed of Stainless Steel and Nickel Under Clamped-Clamped Boundary Conditions | Abstract |
| M. R. Isvandzibaei, M. Setareh | ||
| Vol 2, No 2 (2014) | Behaviour of Reinforced Concrete Beams Reinforced by Composite Materials | Abstract |
| R. Madi, M. Guenfoud, M. S. Nouaouria | ||
| Vol 3, No 4 (2015) | Bucklewaves in Piezoelectrics with Cantor Like Structure | Abstract |
| V. Chiroiu, L. Munteanu, M. Beldiman | ||
| Vol 2, No 4 (2014) | Characterization and Thermal Degradation of Rice Husk via TGA | Abstract |
| Khairuddin Md. Isa, Maung Maung Soe, Mohd Asri Ab Rahim, Mohd Fauzi Abdullah, Khudzir Ismail, Razi Ahmad, Saiful Azhar Saad | ||
| Vol 1, No 6 (2013) | Characterization of Al-Si Functionally Graded Material Using Centrifuge Casting Method | Abstract |
| Aithal S. Kiran, S. Narendranath, Vijay Desai, P. G. Mukunda | ||
| Vol 1, No 6 (2013) | Characterization of Unified Material Parameters in Elasto-Plastic Continuum Approach | Abstract |
| S. M. Humayun Kabir, Tae-In Yeo | ||
| Vol 1, No 1 (2013) | Computer-Aided FEM to Analyze the Composite Materials for Replacing with Steel in Crane Structure | Abstract |
| Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Bin Ahmad, Gholam Hossein Majzoobi | ||
| Vol 2, No 4 (2014) | Contribution to Testing for a Correlation Between Ultrasonic Parameters and Physicochemical Properties of a Medium | Abstract |
| Said Soudani, Z. Derouiche, B. Alshaqaqi, G. Nassar | ||
| Vol 2, No 2 (2014) | Damage Mechanism of a Sandwich Material Tested Under Static and Cyclic Loadings in a Three Points Bending Experiment | Abstract |
| S. Ellagoune, L. Fatmi, A. Rouili | ||
| Vol 1, No 2 (2013) | Determination of Optimum Parameters in Turning of Aluminium Hybrid Composites | Abstract |
| P. Suresh, K. Marimuthu, S. Ranganathan | ||
| Vol 1, No 5 (2013) | Development of Empirical Models of Polyfelt Fibrous Materials for Acoustical Applications | Abstract |
| L. Egab, X. Wang, S. K. Mazlan, M. L. Choo | ||
| Vol 2, No 1 (2014) | Dynamic Analysis with Stress Recovery for Functionally Graded Materials: Numerical Simulation and Experimental Benchmarking | Abstract |
| Carlos Alberto Dutra Fraga Filho, Fernando César Meira Menandro, Rivânia Hermógenes Paulino de Romero, Juan Sérgio Romero Saenz | ||
| Vol 2, No 6 (2014) | Ecological Threats Caused by Improper Disposal and Incineration of Municipal Solid Waste | Abstract |
| Mikhail Krasnyansky | ||
| Vol 1, No 1 (2013) | Editorial: a Message from the Editor-in-Chief | Abstract |
| Jordan Hristov | ||
| Vol 2, No 6 (2014) | Effect of Cross-Linking Agents on Cytocompatibility of a New Reline Acrylic Resin | Abstract |
| Cristiane C. C. Quishida, Eunice T. Giampaolo, Janaina H. Jorge, Carlos E. Vergani, Ana L. Machado, Iracilda Z. Carlos | ||
| Vol 1, No 3 (2013) | Effect of Graphite Filler on the Abrasive Wear Behavior of Polyamide66 Based Composites Using Taguchi Methodology | Abstract |
| Ch. Lakshmi Srinivas, M. M. M. Sarcar, K. N. S. Suman, M. Krishna | ||
| Vol 3, No 3 (2015) | Effect of Surface Energy of Slit Die Wall Materials on Slippage and Appearance Surface Defects During Extrusion | Abstract |
| A. Mezghani, A. Ayadi | ||
| Vol 1, No 1 (2013) | Effect of the Backwashing Cycle on the Performance of a Hybrid Coagulation-Ceramic Membrane System Treating River Water | Abstract |
| Mingyuan Li, Guangxue Wu, Yuntao Guan | ||
| Vol 2, No 1 (2014) | Effects of EDTA and Titania in the HDS of DBT | Abstract |
| Peyman Moradi, Matin Parvari | ||
| Vol 3, No 2 (2015) | Ellipsometric Characterization of Surface Quality for Polished Optical Glass Using Maxwell-Garnett Model in the Effective Medium Approximation | Abstract |
| A. Manallah, M. Bouafia, D. Bouzid | ||
| Vol 1, No 5 (2013) | Experimental Investigations of Silicon Carbide - Fly Ash Reinforced Aluminium Metal Matrix Composite | Abstract |
| P. Vivekanandan, V. P. Arunachalam | ||
| Vol 3, No 2 (2015) | Experimental Study of the Influence of the Static Stiffness of Lathes on the Tool Wear Behavior | Abstract |
| F. Mahfoudi, L. Boulanouar | ||
| 1 - 25 of 80 Items | 1 2 3 4 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2023 Praise Worthy Prize