Modelling of the Wear of Some Tooling Materials


(*) Corresponding author


Authors' affiliations


DOI's assignment:
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)

Abstract


This experimental work consists in modelling the phenomenon of wear of various materials under the influence of the most imposing factors on wear like speed, the load applied, the viscosity of the lubricant and the nature of materials of the parts in contact. To answer that, it was necessary to produce a tribometer making it possible to carry out the various tests. To carry out our experiments, one chose an experimental design of the type 33-1.21. The parameters considered were: the hardness of the three types of materials to knowing the 16MnCr5, the 60WCrV7 and the X210Cr12, the speed of sliding motion on two levels and the viscosity of the lubricant on three levels. By the analysis of regression, one could obtain the mathematical model governing wear according to the influential parameters, like his surfaces of answer allowing to determine the optima thus to predict the behaviours of other materials having a hardness included in the studied field.
Copyright © 2014 Praise Worthy Prize - All rights reserved.

Keywords


Wear; Planning Experiments; Regression; Optimization

Full Text:

PDF


References


Georges J. M., Frottement, Usure et lubrification, la tribologie ou science des surfaces (ed. Eyrolles, 2000).

B. Bhushan, Introduction to Tribology, (John Wiley & Sons edition, 2001).

G. Petit, Contribution à la compréhension des mécanismes élémentaires d’usure douce des élastomères chargés réticules, Thèse de doctorat, 2003.

F. P. Bowden, D. Tabor, The Friction and Lubrification of Solids, (Oxford University Press, 1964).
http://dx.doi.org/10.1016/0160-9327(66)90047-0

G. Vogelpohl, Geschichte der Reibung. eine vergleichende Betrachtung aus der Sicht der klassischen Mechanik, (VDI-Verlag, 1981).

Renaux T., Watremez M., Guérin J-D., Bricout J-P., Structural parameters effect on tribological behaviour, Journées Européennes du Freinage JEF’2002, Lille, France, mars.

B. Bhushan., Introduction to Tribology, (John Wiley & Sons edition, Inc, 2001).

T. M. Elhossainy, A new methodology manipulating orthogonal cutting forces, 6th Int. conference of the Egyptian society of tribology, 28-29 December 2002, Cairo university, Egypt, pp. 105-119.

V. P. Nalimov, N. A. Tschernova, Statistischieski Methodi Planirovania Extremalnick Experimentov, (Naouka, Moscou, 1965).

H. Bandemer, A. Bellmann, Statistische Versuchsplannung. (Teubner Verlag, Leipzig, 1976).
http://dx.doi.org/10.1002/zamm.19790590418

E. Scheffler, Einfürung in die Praxis der statistischen Versuchsplannung, (VEB deutscher Verlag für Grund Stoffindustrie, Leipzig, 1986).

F. Gillon, 1997, Modélisation et optimisation par les plans d’expériences d’un moteur à commutations Electroniques, Thèse de Doctorat, Ecole centrale de Lille, Université des sciences et technologies de Lille, 1997, Ch. 2, pp. 40-50.

S.Vivier, Stratégie d’optimisation par la méthode des plans d’expériences et application aux dispositifs électroniques modélisés par éléments finis, Thèse de doctorat, Ecole centrale de Lille, Université des sciences et technologies de Lille 2002, Ch. 8, pp. 78-84.


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize