Browse Title Index

Issue Title
Vol 6, No 5 (2013) Biologically Inspired Decentralized Target Location Estimation Using Neural Networks Abstract
Mathew Mithra Noel, Ankit Sharma
Vol 15, No 3 (2022) Biomechanical Modeling of the Knee for Rehabilitation in Patients of Latacunga's Patronato Abstract
Elizabeth Salazar Jácome, Wilson Edmundo Sánchez Ocaña, David Salazar Jácome, Javier De la Torre Guzmán, Luis Aguas Bucheli
Vol 6, No 2 (2013) Blackstart of Combined Cycle Power Plants in Slovak Power System Abstract
J. Murgaš, M. Ernek
Vol 8, No 2 (2015) Braking of Three Phase Induction Motors by Controlling Applied Voltage and Frequency Based on Particle Swarm Optimization Technique Abstract
Mahmoud Mohamed Elkholy, Mohammed Abd Elhameed
Vol 10, No 4 (2017) Cascading Control Based on Intelligent Algorithms for a Wind Turbine Equipped with a Doubly-Fed Induction Generator Abstract
Miloud Koumir, Ayoub El Bakri, Ismail Boumhidi
Vol 8, No 2 (2015) Challenges in Model Predictive Control Application for Transient Stability Improvement Using TCSC Abstract
Samidha Kulkarni, Sushama Wagh, Navdeep Singh
Vol 15, No 3 (2022) Characterization of Transient and Steady-State Behavior of Leader-Follower Configuration of MAS with Varying Communication Range Abstract
Swathi Prasad, Hariharan Ramasangu, Govind R. Kadambi
Vol 11, No 3 (2018) Charge-Discharge Regulator Controlled by a Microcontroller for PV Applications - Design and Realization Abstract
Safa Hakim, Brahim Bouachrine, Lahoussine Bouhouch, Ali Moudden
Vol 16, No 3 (2023) Chattering Reduction on Low-Speed Indirect Field Oriented Control Induction Motor Using Second Order Sliding Mode Control Abstract
Era Purwanto, Abdillah Aziz Muntashir, Muhammad Rizani Rusli, Bambang Bambang Sumantri
Vol 15, No 1 (2022) Chattering Reduction Using Boundary-SMC on Low-Speed Setting of 3-Phase Induction Motor with IFOC Method Abstract
Abdillah Aziz Muntashir, Era Purwanto, Bambang Sumantri
Vol 6, No 6 (2013) Chattering-Free Included Sliding Mode Control for an IM Abstract
A. Ltifi, M. Ghariani, M. Ayadi, R. Neji
Vol 11, No 6 (2018) Classification of Objects with Occlusions by Means of a DAG-CNN Abstract
Paula Useche-Murillo, Robinson Jimenez-Moreno, Javier Pinzon-Arenas
Vol 7, No 5 (2014) CNC-CMM Measurement Accuracy and Accompanied Uncertainty at Different Alignment Positions of Long GBs Abstract
Salah H. R. Ali, Hossam M. Sidki
Vol 6, No 1 (2013) Combining Sliding Mode and Linear Quadratic Regulator to Control the Inverted Pendulum Abstract
Ailane Abdellah, Aitelmahjoub Abdelhafid, Rachik Mostafa
Vol 10, No 1 (2017) Command of a Doubly-Fed Induction Generator with a Backstepping Controller for a Wind Turbine Application Abstract
Zakaria Sabiri, Nadia Machkour, Nabila Rabbah, Mohammed Nahid, Elm'kaddem Kheddioui
Vol 7, No 2 (2014) Comparative Study Between Classical and Intelligent DTC for Dual Three Phase Induction Motors Abstract
A. Belgacem, Y. Ben Salem, M. N. Abdelkrim
Vol 6, No 4 (2013) Comparative Study between Conventional Controllers and Optimization of Lead-Lag Controller for Power System Stabilizer Using PSO Abstract
J. Abdul Jaleel, N. Thanvy
Vol 9, No 3 (2016) Comparative Study between Fuzzy Logic Control and Sliding Mode Control for Optimizing the Speed Deportment of a Three Phase Induction Motor Abstract
Hichem Othmani, Fares Sassi, Dhafer Mezghani, Abdelkader Mami
Vol 6, No 4 (2013) Comparative Study of Predictive Multivariable Control and Decentralized Control for a Distillation Column Abstract
I. K. Mekki, M. Bouhamida, M. Benghanem
Vol 10, No 1 (2017) Comparison between LCL Passive Damping Filters and Parallel Active Filter in a Solar Conversion Chain Connected to the Electrical Network with Nonlinear Loads Abstract
Ihssane Chtouki, Malika Zazi, Mohamed Amansag, Marouane Rayyam
Vol 8, No 3 (2015) Comparison of Control Strategies Applied to Nonlinear Quarterly Car Passive Suspension System Abstract
Muhammad Sani Gaya, Amir Bature, Lukman A. Yusuf, I. S. Madugu, Ukashatu Abubakar, Saidu Adamu Abubakar
Vol 13, No 4 (2020) Comparison of Different DC Motor Speed Controllers Abstract
Ivan Isho Gorial
Vol 7, No 4 (2014) Comparison of Fuzzy Logic and GA-PID Controller for Position Control of Inverted Pendulum Abstract
Lukman A. Yusuf, Nuraddeen Magaji
Vol 7, No 2 (2014) Comparison of Self Tuning P and PI Voltage Control of DFIG in Wind Power Generation Considering Two Mass Shaft Model Abstract
Hengameh Kojooyan Jafari, Helena Kojooyan Jafari
Vol 15, No 5 (2022) Control and Path Planning for Quadrotor Oriented to Agricultural Support in Annona Muricata Crops Abstract
Cristian Roa, Dario Amaya, Olga Ramos
101 - 125 of 532 Items << < 1 2 3 4 5 6 7 8 9 10 > >> 

Please send any question about this web site to
Copyright © 2005-2023 Praise Worthy Prize