Browse Title Index


 
Issue Title
 
Vol 6, No 2 (2013) Blackstart of Combined Cycle Power Plants in Slovak Power System Abstract
J. Murgaš, M. Ernek
 
Vol 8, No 2 (2015) Braking of Three Phase Induction Motors by Controlling Applied Voltage and Frequency Based on Particle Swarm Optimization Technique Abstract
Mahmoud Mohamed Elkholy, Mohammed Abd Elhameed
 
Vol 10, No 4 (2017) Cascading Control Based on Intelligent Algorithms for a Wind Turbine Equipped with a Doubly-Fed Induction Generator Abstract
Miloud Koumir, Ayoub El Bakri, Ismail Boumhidi
 
Vol 8, No 2 (2015) Challenges in Model Predictive Control Application for Transient Stability Improvement Using TCSC Abstract
Samidha Kulkarni, Sushama Wagh, Navdeep Singh
 
Vol 11, No 3 (2018) Charge-Discharge Regulator Controlled by a Microcontroller for PV Applications - Design and Realization Abstract
Safa Hakim, Brahim Bouachrine, Lahoussine Bouhouch, Ali Moudden
 
Vol 6, No 6 (2013) Chattering-Free Included Sliding Mode Control for an IM Abstract
A. Ltifi, M. Ghariani, M. Ayadi, R. Neji
 
Vol 11, No 6 (2018) Classification of Objects with Occlusions by Means of a DAG-CNN Abstract
Paula Useche-Murillo, Robinson Jimenez-Moreno, Javier Pinzon-Arenas
 
Vol 7, No 5 (2014) CNC-CMM Measurement Accuracy and Accompanied Uncertainty at Different Alignment Positions of Long GBs Abstract
Salah H. R. Ali, Hossam M. Sidki
 
Vol 6, No 1 (2013) Combining Sliding Mode and Linear Quadratic Regulator to Control the Inverted Pendulum Abstract
Ailane Abdellah, Aitelmahjoub Abdelhafid, Rachik Mostafa
 
Vol 10, No 1 (2017) Command of a Doubly-Fed Induction Generator with a Backstepping Controller for a Wind Turbine Application Abstract
Zakaria Sabiri, Nadia Machkour, Nabila Rabbah, Mohammed Nahid, Elm'kaddem Kheddioui
 
Vol 7, No 2 (2014) Comparative Study Between Classical and Intelligent DTC for Dual Three Phase Induction Motors Abstract
A. Belgacem, Y. Ben Salem, M. N. Abdelkrim
 
Vol 6, No 4 (2013) Comparative Study between Conventional Controllers and Optimization of Lead-Lag Controller for Power System Stabilizer Using PSO Abstract
J. Abdul Jaleel, N. Thanvy
 
Vol 9, No 3 (2016) Comparative Study between Fuzzy Logic Control and Sliding Mode Control for Optimizing the Speed Deportment of a Three Phase Induction Motor Abstract
Hichem Othmani, Fares Sassi, Dhafer Mezghani, Abdelkader Mami
 
Vol 6, No 4 (2013) Comparative Study of Predictive Multivariable Control and Decentralized Control for a Distillation Column Abstract
I. K. Mekki, M. Bouhamida, M. Benghanem
 
Vol 10, No 1 (2017) Comparison between LCL Passive Damping Filters and Parallel Active Filter in a Solar Conversion Chain Connected to the Electrical Network with Nonlinear Loads Abstract
Ihssane Chtouki, Malika Zazi, Mohamed Amansag, Marouane Rayyam
 
Vol 8, No 3 (2015) Comparison of Control Strategies Applied to Nonlinear Quarterly Car Passive Suspension System Abstract
Muhammad Sani Gaya, Amir Bature, Lukman A. Yusuf, I. S. Madugu, Ukashatu Abubakar, Saidu Adamu Abubakar
 
Vol 7, No 4 (2014) Comparison of Fuzzy Logic and GA-PID Controller for Position Control of Inverted Pendulum Abstract
Lukman A. Yusuf, Nuraddeen Magaji
 
Vol 7, No 2 (2014) Comparison of Self Tuning P and PI Voltage Control of DFIG in Wind Power Generation Considering Two Mass Shaft Model Abstract
Hengameh Kojooyan Jafari, Helena Kojooyan Jafari
 
Vol 11, No 4 (2018) Control and Stability Evaluation of the Bipedal Walking Robot AnyWalker Abstract
Igor Ryadchikov, Semyon Sechenev, Evgeny Nikulchev, Michail Drobotenko, Alexander Svidlov, Pavel Volkodav, Rinat Vishnykov
 
Vol 7, No 2 (2014) Control of 5×2 Stacked Multicell Converter for Solar Panel Abstract
Pathipooranam Ponnambalam, Praveen Kumar Medarametla, C. Dhanamjayulu, K. Krishnamurthy
 
Vol 11, No 3 (2018) Control of a Permanent Magnet Synchronous Motors Based on the Nonlinear Dynamic Inversion Approach Abstract
Sabrine Jebri, Khaled Nouri
 
Vol 11, No 1 (2018) Control of Serial Link Manipulator Using a Fractional Order Controller Abstract
Raouf Fareh, Maamar Bettayeb, Mohammad H. Rahman
 
Vol 11, No 5 (2018) Control of the Asynchronous Machine with Orientation on Stator Flux Abstract
Mohamed Benmbarek, F. Benzergua, A. Chaker
 
Vol 11, No 4 (2018) Control System for an Object with Interval-Given Parameters: Quality Analysis Based on Leading Coefficients of Characteristic Polynomials Abstract
Yury Chursin, Dmitry Sonkin, Mikhail Sukhodoev, Ruslan Nurmuhametov, Vsevolod Pavlichev
 
Vol 8, No 4 (2015) Control System for Double Inverted Pendulum on a Cart by H-Infinity Controller Abstract
Sitthichok Punlabpho, Thira Jearsiripongkul
 
76 - 100 of 399 Items << < 1 2 3 4 5 6 7 8 9 10 > >> 



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2019 Praise Worthy Prize