Browse Title Index


 
Issue Title
 
Vol 10, No 3 (2017) Open Switch Fault Detection and Fault Tolerant of Power Converter Fed DFIG in WECS Abstract
Amina Tamer, Djilali Toumi, Azzedine Bendiabdellah, Bilal Djamal Eddine Cherif
 
Vol 14, No 1 (2021) Operational Failure Detection Applied to Heat Exchange Systems Using State Observer Method Abstract
Jhan Piero Rojas, Edwin Espinel, Eder Florez
 
Vol 16, No 1 (2023) Optimal Active Power Generation in Electrical Networks Using Distributed Fixed-Time Control of Multi-Agent Systems Abstract
Mohamed Ghazzali, Mohamed Haloua, Fouad Giri
 
Vol 11, No 5 (2018) Optimal Control of Active and Reactive Powers in Wind Energy Conversion Systems Using Particle Swarm Optimization and Adaptive Sliding Mode Control Abstract
Mbarek Taleb, Mohamed Cherkaoui
 
Vol 7, No 5 (2014) Optimal Control of Switched Systems Based on Continuous Hopfield Neural Network Abstract
Ahmed Anis Kahloul, Marwen Kermani, Anis Sakly
 
Vol 7, No 3 (2014) Optimal Environmental Economic Dispatch Using a Classical Technique Abstract
Suresh K. Damodaran, T. K. Sunil Kumar
 
Vol 6, No 4 (2013) Optimal Load Frequency Control in Two Area Hydro Thermal Deregulated System with Co-Ordinated Control of SMC-TCPS Abstract
L. Shanmukha Rao, N. V. Ramana
 
Vol 9, No 3 (2016) Optimal PID Design Approaches for an Inverted Pendulum System Abstract
Muhammad Sani Gaya, Anas Abubakar Bisu, Syed Najib Syed Salim, I. S. Madugu, L. A. Yusuf, M. L. Kaurangini, M. T. M. Khairi
 
Vol 8, No 1 (2015) Optimal PID Tuning for DC Motor Speed Controller Based on Genetic Algorithm Abstract
Ali Taki El-Deen, Ahmed Abdel Hakim Mahmoud, Ahmed R. El-Sawi
 
Vol 6, No 6 (2013) Optimal Placement and Sizing of Multiple Capacitors in Radial Distribution Systems Using Modified TLBO Algorithm Abstract
Manas Ranjan Nayak, Kumari Kasturi, Pravat Kumar Rout
 
Vol 9, No 5 (2016) Optimal State-Feedback Design for Inverted Pendulum System by Flower Pollination Algorithm Abstract
Deacha Puangdownreong
 
Vol 10, No 2 (2017) Optimal Tuning of PSS Parameter Using HACDE Based on Equivalent SMIB Model Abstract
Rusilawati Rusilawati, Dheny Ashari, Uman Putra Dimas Fajar, Rony Seto Wibowo, Adi Soeprijanto
 
Vol 14, No 2 (2021) Optimizing Deep Learning Methods in Neural Network Architectures Abstract
Kristina Gorshkova, Victoria Zueva, Maria Kuznetsova, Larisa Tugashova
 
Vol 7, No 3 (2014) Optimum Frequency Droop Control of Islanded Micro-grid Using PID-PSO Controller Abstract
Meysam Shamshiri, Chin Kim Gan, Rosli Bin Omar, Mohd Ruddin Ab Ghani
 
Vol 10, No 1 (2017) Optimum Orientation Angles for Photovoltaic Arrays to Maximize Energy Gain at Near Equator Location in Indonesia Abstract
Rudi Kurnianto, Ayong Hiendro, Muhammad Ismail Yusuf
 
Vol 14, No 4 (2021) Output Feedback Control of Antilock Braking System Abstract
Jamal El-Bakkouri, Hamid Ouadi, Abdallah Saad
 
Vol 15, No 1 (2022) Parameter Tuning of Sliding Mode Speed Controller of Induction Motor Drive Using Teaching-Learning Based Optimization Algorithm Abstract
P. J. Shaija, Asha Elizabeth Daniel
 
Vol 10, No 4 (2017) Parameters Identification of Industrial Induction Motor Using Manufacturer Data Sheet and Power Quality Analyzer Abstract
Shahnaz Habibkhah, Mohammad Ghiyasi, Jalal Arasi, Li Li
 
Vol 15, No 2 (2022) Parametric Synthesis of a Robust Controller for Maximising the Response of an Interval Control System Abstract
Sergey A. Gayvoronskiy, Tatiana Ezangina, Maxim Pushkarev
 
Vol 12, No 4 (2019) Parametrical Synthesis of Linear Controllers in Aperiodical Systems on Basis of Decomposition Approach Abstract
Sergey Anatolevich Gayvoronskiy, Tatiana Ezangina, Maxim Pushkarev, Ivan Khozhaev
 
Vol 7, No 3 (2014) Particle Swarm Optimization (PSO) based optimum Distributed Generation (DG) location and sizing for Voltage Stability and Loadability Enhancement in Radial Distribution System Abstract
S. Ramya, N. B. Rajesh, B. Viswanathan, B. Karthika Vigneswari
 
Vol 7, No 1 (2014) Passivity-Based Analysis for Partially Variable Nonlinear PID Controller for Robot Manipulators Abstract
Sifuentes Mijares Juan, Meza Medina José Luis
 
Vol 13, No 4 (2020) Path Planning of the Manipulator Arm FANUC Based on Soft Computing Techniques Abstract
Loubna Bouhalassa, Laredj Benchikh, Zoubir Ahmed-Foitih, Kamel Bouzgou
 
Vol 7, No 2 (2014) Performance Analysis of Different Control Methods of Z-source Inverter Feeding Induction Furnace Load Abstract
Parag Nijhawan, R. S. Bhatia, D. K. Jain
 
Vol 9, No 5 (2016) Performance Analysis of Neural Network Based Bridgeless Converters for Switched Mode Power Supplies Abstract
S. Malathi, R. Murali Sachithanandham, J. Jayachandran
 
376 - 400 of 545 Items << < 11 12 13 14 15 16 17 18 19 20 > >> 



Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize