Open Access Open Access  Restricted Access Subscription or Fee Access

Mathematical Description of Pump-Injector Work with Hydraulic Plunger Drive and Ring Control Valve


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireaco.v14i3.20712

Abstract


The study relevance and expediency are due to the limited performance of pump injectors with a hydraulic plunger drive in terms of the volume of cycle feed due to the control valve system problematic design. The research aims to develop a pump-injector model with a hydraulic plunger drive that can improve the pump-injector functional properties by significantly increasing the speed of the control valve and improving its design. In the improved pump-injector model, a valve in the form of an elastic split ring is mounted in the valve assembly instead of a freely floating control valve (ball) or a movable poppet with springs. The leading approach to the problem was to assess the influence of the control valve parameters on the control of the pump-injector operation in the modes of mechanical and electronic functioning. The pump-injector improved using the proposed method allows achieving a technically new effect, significantly reducing the control valve response time. Thi effect is achieved since moving along the seat, the edge of the annular valve ensures the opening and closing of the drain channel faster than the ring travel by a factor of π. The ring valve acts as a spring to return to its original position, simplifying the design as much as possible and reducing the harmful discharge volume. During the research, a new mathematical expression establishing the dependence of the valve stroke on the design parameters was derived. The optimal parameters of the control ring valve of the pump-injector determining the quality of fuel injection were established: diameter - 20 mm, width - 12 mm, thickness - 0.46 mm, the diameter of the control fluid supply channel - 3 mm.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Annular Split Valve; Electronic Control; Mathematical Model; Pump-Injector; Valve Stroke

Full Text:

PDF


References


A. Yahya, M. Zohadie, A.F. Kheiralla, S.K. Giew, and N.E. Boon, Mapping system for tractor-implement performance, Computers and Electronics in Agriculture, Vol. 69(Issue 1): 2-11, 2009.
https://doi.org/10.1016/j.compag.2009.06.010

Y.X. Liang, F.S. Liu, Y.K. Li, and X.D. An, Research on the dynamic cavitation flow characteristics in the control valve region during the opening process of the valve in an electronic unit pump, IEEE Access, Vol. 8: 128212-128200, 2020.
https://doi.org/10.1109/ACCESS.2020.3009001

T. Qiu, H. Dai, Y. Lei, C. Cao, and X. Li, Optimising the cam profile of an electronic unit pump for a heavy-duty diesel engine, Energy, Vol. 83: 276-283, 2015.
https://doi.org/10.1016/j.energy.2015.02.021

M. Gonzalez-de-Soto, L. Emmi, I. Garcia, and P. Gonzalez-de-Santos, Reducing fuel consumption in weed and pest control using robotic tractors, Computers and Electronics in Agriculture, Vol. 114: 96-113, 2015.
https://doi.org/10.1016/j.compag.2015.04.003

D. Qian, R. Liao, J. Xiang, B. Sun, S. Wang, Fluid-structure interaction analysis on the performance of the high-pressure fuel pump for diesel engines. In ASME 2016 International Mechanical Engineering Congress and Exposition, IMECE2016-66766, 2016.
https://doi.org/10.1115/IMECE2016-66766

F.Z. Gabdrafikov, S.B. Shamukaev, E.M. Gaisin, and R.R. Safina, Mathematical description of the machine-tractor aggregate diesel engine with electronic positional impact regulator, FME Transactions, Vol. 46: 469-474, 2018.
https://doi.org/10.5937/fmet1804469G

E.A. Salykin, V.I. Lipilin, and A.A. Skorobogatov, Method of fuel injection in small diesel engines author links open overlay panel, Procedia Engineering, Vol. 206: 1552-1557, 2017.
https://doi.org/10.1016/j.proeng.2017.10.676

L.V. Sin, Design of high-pressure fuel pumps for diesel storage systems, Mechanical engineering, Vol. 12: 27-32, 2011.

P. Liu, L. Fan, Q. Hayat, D. Xu, X. Ma, and E. Song, Research on key factors and their interaction effects of electromagnetic force of high-speed solenoid valve, The Scientific World Journal, Vol. 2014: 567242, 2014.
https://doi.org/10.1155/2014/567242

S.L. Zhang, Z.F. Zhao, C.L. Zhao, F.J. Zhang, and S. Wang, Experimental study of hydraulic electronic unit injector in a hydraulic free piston engine, Applied Energy, Vol. 179: 888-898, 2016.
https://doi.org/10.1016/j.apenergy.2016.07.051

M.S. Štavljanin, Mathematical modeling and identification of the mathematical model parameters of diesel fuel injection systems, Military Technical Courier, Vol. 65(Issue 2): 421-441, 2017.
https://doi.org/10.5937/vojtehg65-10772

W. Sun, and X. Mo, Simulation of solenoid valve characteristics of electronically controlled fuel system for diesel engine, IOP Conference Series: Materials Science and Engineering, Vol. 381: 012065, 2018.
https://doi.org/10.1088/1757-899X/381/1/012065

J.Y. Zhang, P. Liu, L.Y. Fan, and Y.J. Deng, Analysis on dynamic response characteristics of high-speed solenoid valve for electronic control fuel injection system, Mathematical Problems in Engineering, Vol. 2020: 2803545, 2020.
https://doi.org/10.1155/2020/2803545

T. Qiu, H.F. Dai, Y. Lei, X. Song, and C.L. Cao, Investigation of the unsteady-flow characteristics in the control valve of a diesel engine unit pump fuel system, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 231(Issue 7): 927-940, 2017.
https://doi.org/10.1177/0954407017701493

X. Zhu, S. Limbu, K. Cung, W. De Ojeda, and S.Y. Lee, Heui injector modeling and roi experiments for high injection pressure of diesel and dimethyl ether (DME), SAE Technical Paper, 2016-01-0855, 2016.
https://doi.org/10.4271/2016-01-0855

L.V. Dat, and Y. Shiao, Desing of a new electromagnetic valve with a hybrid PM/EM actuator in S.I. engines, Journal of Marine Science and Technology, Vol. 22(Issue 6): 687-693, 2014.

J. Song, J.-P. Huang, X.-L. Li, S.-Z. Li, and Z. Huang, Simulative analysis for drive properties of high-speed solenoid valve in diesel engines, Vehicle Engine, Vol. 5: 013, 2005.

E. Puente, Analysis and diagnosis of the electronic fuel injection control system HEUI CAT-3126, INNOVA Research Journal, Vol. 3(Issue 1): 145-150, 2018.
https://doi.org/10.33890/innova.v3.n1.2018.607

A.R. Stockner, M.A. Flinn, and F.A. Camplin, Development of the HEUI fuel system - integration of design, simulation, test, and manufacturing, SAE International Journal of Engines, Vol. 102(Issue 3): 311-326, 1993.
https://doi.org/10.4271/930271

J. J. Liu, Y.W. Lee, S.Y. Yang, and C.C. Cheng, Non-linear identification and analysis of a HEUI system, IFAC Proceedings Volumes, Vol. 41(Issue 2): 7457-7462, 2008.
https://doi.org/10.3182/20080706-5-KR-1001.01260

D. Coldren, S. Schuricht, and R. Smith, Hydraulic electronic unit injector with rate shaping capability, SAE Technical Paper, 2003-01-1384, 2003.
https://doi.org/10.4271/2003-01-1384

Z. Zhang, F.S. Liu, P. Wang, R. Hu, and B.G. Sun, Methodology toparametric design of cam profile for electronic unit pump, Energy, Vol. 139: 170-183, 2017.
https://doi.org/10.1016/j.energy.2017.07.142

F.Z. Gabdrafikov, M.A. Abrarov, S.B. Shamukaev, I. Aysuvakov, D.D. Kharisov, U.A. Makhiyanov, and D.P. Yukhin, Theoretical and experimental study of a hydraulically actuated diesel pump-injector unit with electronically controlled ring valve, FME Transactions, Vol. 47(Issue 3): 576-584, 2019.
https://doi.org/10.5937/fmet1903576G

F.Z. Gabdrafikov, M.A. Abrarov, and I.A. Abrarov, Pump-Injector with hydraulic plunger drive and electronically controlled ring valve, Utility model patent RU 193706 U1, 2019.

S.F. Glassey, A.R. Stockner, and M.A. Flinn, HEUI - A new direction for diesel engine fuel systems, SAE International Journal of Engines, Vol. 102(Issue 3): 300-310, 1993.
https://doi.org/10.4271/930270

O.S. Lara Gudiño, and E.R. Chamorro Yandún, Modeling and Simulation of the HEUI Injectors of a Cat C7 Engine, Bachelor's thesis, Universidad Técnica del Norte, Ibarra, 2018.

M.H. Li, Z. Zhou, and X.Z. Jia, research on simulation for the electronic unit pump fuel injection system of hxn5 diesel locomotive, Advanced Materials Research, Vol. 645: 445-449, 2013.
https://doi.org/10.4028/www.scientific.net/AMR.645.445

P.D. Raut, O.A. Atre, M. Trivedi, and N. Henein, Strategies to gain the loss in power in a military diesel engine using JP-8 instead of ULSD 2020, SAE Technical Papers, No. 2020-01-0804, 2020.
https://doi.org/10.4271/2020-01-0804

M.O. Rawashdeh, Hydraulic electronic unit injector (HEUI) testing bench, International Journal of Mechanical and Production Engineering Research and Development, Vol. 9(Issue 4): 567-580, 2019.
https://doi.org/10.24247/ijmperdaug201956

Kasyanov, P.O., Toscano, L., Zadoianchuk, N.V., Topological properties of strong solutions for the 3D Navier-Stokes equations, (2014) Solid Mechanics and its Applications, 211, pp. 181-187.
https://doi.org/10.1007/978-3-319-03146-0_13

Marchetto, F., Benini, E., Numerical Simulation of Harmonic Pitching Supercritical Airfoils Equipped with Movable Gurney Flaps, (2019) International Review of Aerospace Engineering (IREASE), 12 (3), pp. 109-122.
https://doi.org/10.15866/irease.v12i3.16723

Sugar-Gabor, O., Numerical Study of the Circular Cylinder in Supersonic Ground Effect Conditions, (2018) International Review of Aerospace Engineering (IREASE), 11 (1), pp. 15-26.
https://doi.org/10.15866/irease.v11i1.13696

Benbih, H., Gueraoui, K., Bensalah, H., Rtibi, A., Belkasmi, Y., Zeggwagh, G., Mathematical and Numerical Modeling of the Suspension of Particles Due to the Air Flow Between Two Rigid Walls, (2018) International Review of Civil Engineering (IRECE), 9 (1), pp. 50-56.
https://doi.org/10.15866/irece.v9i1.14286


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize