Browse Title Index

Issue Title
Vol 5, No 4 (2017) Enhancing the Braking Process, Starting and Electromagnetic Torques of the Induction Motor Abstract
Omar M. Al-Barbarawi
Vol 7, No 1 (2019) Evaluation and Gradation of Simultaneous Damage in Concrete Affected by Alkali-Silica Reaction and Sulfate Attack Abstract
Esperanza Menéndez
Vol 5, No 4 (2017) Experimental and Numerical Analysis of the Scratch Behaviour of Steels: Description of the Effect of Work Hardening Abstract
M. Mendas, M. Ben Tkaya, S. Benayoun, H. Zahouani, Ph. Kapsa
Vol 2, No 1 (2014) Experimental Modal Analysis [EMA] on Random Oriented Pressed Mat Fibre/Epoxy Composites Abstract
Mohd Amirul Abdul Rahman, Azmin Shakrine Mohd Rafie, Renuganth A/L Vartharajoo
Vol 2, No 3 (2014) Experimental Study of Air Conditioning of the Building by Floor Cooling System Abstract
Serigne Thiao, A. Mar, A. Karbach, I. Youm
Vol 1, No 6 (2013) Experimental Study of Sorption Isotherms and Drying of Sugar-Beet Pulp in Hot Air Abstract
A. Belghit, T. Iguedjtal, A. Mrani
Vol 6, No 1 (2018) Fast Transfer of Packets Through DB Routing Using Ant Colony Optimization Abstract
S. Anuradha, G. Raghuram, K. E. Sreenivasa Murthy, B. Gurunath Reddy
Vol 6, No 4 (2018) Fault Diagnosis Methods for Three Phase PWM Inverter Fed Induction Motor Abstract
Y. Soufi, T. Bahi, M. F. Harkat, M. Mohammedi
Vol 6, No 4 (2018) Fault Location in High Voltage Transmission Line with Current Traveling Wave Abstract
I. Moosaviyan, S. Gh. Seifossadat, R. Kianinezhad
Vol 1, No 3 (2013) Fed an Induction Motor Drive Using an Advanced Current Source Inverter Abstract
S. M. Shirvani Boroujeni
Vol 5, No 1 (2017) Final Size of Stochastic SIR Epidemic Model with Infection Rate of General Form Abstract
Driss Kiouach, Lahcen Omari
Vol 6, No 4 (2018) Finite Element Study on Normal Stress Distribution to the Kerf Plane in a Finite Plate Under Mode I Loading Abstract
M. Firdaus, Muhamad Saifuldin Abdul Manan, A. F. Annuar, M. E. Azamudin
Vol 6, No 5 (2018) Flight Demonstration of Realtime Path Planning of an UAV Using Evolutionary Computation and Rule-Based Hybrid Method Abstract
Shin-Ichiro Higashino, Yohei Maruyama
Vol 7, No 1 (2019) Formation and Characteristics of Sandbars at Both Experiment and Prototype Scales Abstract
Mohammed Alauddin, T. Tashiro, T. Tsujimoto
Vol 1, No 3 (2013) Four-/Five-Element Planar Log-Periodic Dipole Antennas for Medical Telemetry Applications Abstract
Mohamed Salah Karoui, Hamadi Ghariani, Mounir Samet, Mohamed Ramdani, Richard Perdriau
Vol 4, No 6 (2016) FPGA Based Speed Control of Induction Motor Abstract
B. Hariram, N. S. Marimuthu
Vol 5, No 4 (2017) Free Vibration of Helical Springs Using a Dynamic Finite Element Mesh Reduction Technique Abstract
S. M. Hashemi, A. Roach
Vol 7, No 5 (2019) Fuzzy Control Approach for Monomachine Power Systems Abstract
A. Kahouli, T. Guesmi, H. Hadj Abdallah, O. Abderrazak
Vol 5, No 6 (2017) Fuzzy Control of Wind Cage Induction Generator System Abstract
K. B. Mohanty
Vol 5, No 5 (2017) Fuzzy Controller Optimization for a Mobile Robot Navigation Abstract
M. Jallouli, M. Chtourou
Vol 1, No 4 (2013) GA and RL Based PSS of a Multi-Machine System - A Case Study with Kerala Grid Abstract
J. Abdul Jaleel, K. Preethy
Vol 2, No 3 (2014) Gain Scheduling Control for DC Engine Abstract
Vojtech Veselý, Jakub Osuský
Vol 5, No 1 (2017) General Modelling of Magnetic Saturation in Round Rotor Undamped Synchronous Machines Abstract
Mohamed Larbi Khlaifi, Habib Rehaoulia, Moncef Gaussa
Vol 1, No 3 (2013) Generalized Active Power Filter Combined with Battery Energy Storage System Abstract
Chang Xue, Jianze Wang, Yanchao Ji, Binhao Jiang
Vol 6, No 6 (2018) Genetic Algorithm and Based Particle Swarm Optimization Comparison for Solving a Flow-Shop Multiobjective Scheduling Problem in Pharmaceutical Industries Abstract
H. Boukef, M. Benrejeb, P. Borne
76 - 100 of 207 Items << < 1 2 3 4 5 6 7 8 9 > >> 

Please send any question about this web site to
Copyright © 2005-2020 Praise Worthy Prize