Open Access Open Access  Restricted Access Subscription or Fee Access

Tensile Properties of Woven Plastic Straw Waste Fiber-Reinforced Polymer Composites


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irea.v11i1.22537

Abstract


The choice of ASTM D638 versus ASTM D3039 test specimen shape is usually based on the perceived susceptibility of ASTM D638 test specimens to failure within the fillet radius. For test results to be accepted, specimens should fall inside the narrow length (i.e., ASTM D638) or outside of the grips (i.e., ASTM D3039), according to ASTM polymer and plastic tensile test standards. The choice of ASTM test specimen shape has received little published research, particularly for plastic FRP materials. Through a comparison of the mechanical performance and failure acceptance rates of test specimen geometries manufactured using plastic straw waste FRP, ASTM D3039, and ASTM D638 test specimens, this study offers evidence-based guidance to offer recommendations for using current ASTM polymer testing standards for plastic FRP. According to the results, using ASTM D3039 instead of specimens from ASTM D638 has inherent advantages. Due to the rectangular shape of the test specimen, ASTM D3039 test specimens consistently fall within the gauge length of the test specimen. According to the results, there will be variations in the tensile test results depending on the different cross-sectional areas of the test specimen geometries, just like with traditionally manufactured polymer composites.
Copyright © 2023 Praise Worthy Prize - All rights reserved.

Keywords


ASTM; Disaster Risk Reduction; FRP; Plastic Straw Waste; Tensile Test

Full Text:

PDF


References


S.B. Borrelle, J. Ringma, K.L. Law, C.C. Monahan, Predicted Growth in Plastic Waste Exceeds Efforts to Mitigate Plastic Pollution, Science, vol. 369, n. 6510, 2020, pp. 1-4.
https://doi.org/10.1126/science.aba3656

J.A. Brandon, W. Jones, M.D. Ohman, Multidecadal Increase in Plastic Particles in Coastal Ocean Sediments, Science Advances, vol. 5, n. 9, 2019, pp. 1-5.
https://doi.org/10.1126/sciadv.aax0587

L.J.J. Meijer , T. van Emmerik, R. van der Ent, C. Schmidt, L. Lebreton, More than 1000 Rivers Account for 80% of Global Riverine Plastic Emissions into the Ocean, Science Advances, vol. 7, n. 18, 2021, pp. 1-7.
https://doi.org/10.1126/sciadv.aaz5803

Q. Tan, L. Yang, F. Wei, Y. Chen, J. Li, Is Reusable Packaging an Environmentally Friendly Alternative to the Single-use Plastic Bag? A Case Study of Express Delivery Packaging in China. Resources, Conservation and Recycling, vol. 190, n. 106863, 2022, pp. 1-6
https://doi.org/10.1016/j.resconrec.2022.106863

D. Winton, L. Marazzi, S. Loiselle, Drivers of Public Plastic (mis)use - New Insights from Changes in Single-use Plastic Usage During the Covid-19 Pandemic, Science of The Total Environment, vol. 849, n. 157672, 2022, pp. 1-3.
https://doi.org/10.1016/j.scitotenv.2022.157672

L. Fanini, A. Guittard, On Single Use Plastic Straws: Pre-ban Findings on Touristic Beaches in Crete, Marine Pollution Bulletin, vol. 171, n. 112790, 2021, pp. 1-7.
https://doi.org/10.1016/j.marpolbul.2021.112790

J. C. Prata, A. L. P. Silva, T. R. Walker, A. C. Duarte, Rocha- T. Santos, COVID-19 Pandemic Repercussions on the Use and Management of Plastics, Env Sci Tech, vol. 54, n. 13, 2020, pp. 7760-7765.
https://doi.org/10.1021/acs.est.0c02178

B. L. Hartley, Exploring Public Views on Marine Litter in Europe: Perceived Causes, Consequences and Pathways to Change, Marine Pollution Bulletin, vol. 133, 2018, pp. 945-955.
https://doi.org/10.1016/j.marpolbul.2018.05.061

Tavio, T., Machmoed, S., Raka, I., Behavior of Square RC Columns Confined with Interlocking Square Spiral Under Axial Compressive Loading, (2022) International Journal on Engineering Applications (IREA), 10 (5), pp. 322-335.
https://doi.org/10.15866/irea.v10i5.20655

Tavio, B. Kusuma, Investigation of Sress-strain Models for Confinement of Concrete by Welded Wire Fabric, Procedia Engineering, Elsevier, vol. 14, 2011, pp. 2031-2038.
https://doi.org/10.1016/j.proeng.2011.07.255

P. Pudjisuryadi, Tavio, Performance of Square Reinforced Concrete Columns Externally Confined by Steel Angle Collars under Combined Axial and Lateral Load, Procedia Engineering, Elsevier, vol. 125, 2015, pp. 1043-1049.
https://doi.org/10.1016/j.proeng.2015.11.160

Tavio, B. Kusuma, Ductility of Confined Reinforced Concrete Columns with Welded Reinforcement Grids, Excellence in Concrete Construction through Innovation-Proceedings of the International Conference on Concrete Construction, CRC Press, Taylor and Francis Group, 2009, London, UK.

Sabariman B., Soehardjono A., Wisnumurti, Wibowo A., and Tavio, Stress-strain behavior of steel fiber-reinforced concrete cylinders spirally confined with steel bars, Advances in Civil Engineering, vol. 2018, n. 6940532, 2018, pp. 1-8.
https://doi.org/10.1155/2018/6940532

Tavio, B. Kusuma, Stress-strain Model for High-strength Concrete Confined by Welded Wire Fabric, Journal of Materials in Civil Engineering, ASCE, vol. 21, n. 1, 2009, pp. 40-45.
https://doi.org/10.1061/(ASCE)0899-1561(2009)21:1(40)

P. Pudjisuryadi, Tavio, Axial Compressive Behavior of Square Concrete Columns Externally Collared by Light Structural Steel Angle Sections, International Journal of Applied Engineering Research, vol. 11, n. 7, 2016, pp. 4655-4666.

Agustiar, Tavio, I G. P. Raka, R. Anggraini, Behavior of Concrete Columns Reinforced and Confined by High-strength Steel Bars, International Journal of Civil Engineering and Technology, vol. 9, n. 7, 2018, pp. 430-436.

ASTM D638 - Standard Test Method for Tensile Properties of Plastics, 2014, pp. 1-4.

ASTM D3039 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, 2017, pp. 1-4.

T. Jirawattanasomkul, S. Likitlersuang, N. Wuttiwannasak, V. Varabuntoonvit, W. Yodsudjai T. Ueda, Fibre-reinforced Polymer Made from Plastic Straw for Concrete Confinement: an alternative method managing plastic waste from the Covid-19 pandemic, Eng J, vol. 25, n. 3, 2021, pp. 1-14.
https://doi.org/10.4186/ej.2021.25.3.1

C. Ziemian, M. Sharma, and S. Ziemi, Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling, in Mechanical Engineering, InTech, 2012, pp.1-6.
https://doi.org/10.5772/34233

A. K. Sood, R. K. Ohdar, S. S. Mahapatra, Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Parts, Materials & Design, vol. 31, n. 1, 2010, pp. 287-295.
https://doi.org/10.1016/j.matdes.2009.06.016

C. S. Lee, S. G. Kim, H. J. Kim, S. H. Ahn, Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts, Journal of Materials Processing Technology, vol. 187-188, 2007, pp. 627-630.
https://doi.org/10.1016/j.jmatprotec.2006.11.095

J. J. Laureto, J. M. Pearce, Anisotropic Mechanical Property Variance between ASTM D638-14 Type i and Type iv Fused Filament Fabricated Specimens, Polymer Testing, vol. 68, 2018, pp. 294-301.
https://doi.org/10.1016/j.polymertesting.2018.04.029

B. H. Lee, J. Abdullah, Z. A. Khan, Optimization of Rapid Prototyping Parameters for Production of Flexible ABS Object, Journal of Materials Processing Technology, vol. 169, n. 1, 2005, pp. 54-61.
https://doi.org/10.1016/j.jmatprotec.2005.02.259

O. S. Es-Said, J. Foyos, R. Noorani, M. Mendelson, R. Marloth, B. A. Pregger, Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples, Materials and Manufacturing Processes, vol. 15, n. 1, 2000, pp. 107-122.
https://doi.org/10.1080/10426910008912976

S. Ahn, M. Montero, D. Odell, S. Roundy, P. K. Wright, Anisotropic Material Properties of Fused Deposition Modeling ABS, Rapid Prototyping Journal, vol. 8, n. 4, 2002, pp. 248-257.
https://doi.org/10.1108/13552540210441166

L. Li, Q. Sun, C. Bellehumeur, P. Gu, Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties, Journal of Manufacturing Processes, vol. 4, n. 2, 2002, pp. 129-141.
https://doi.org/10.1016/S1526-6125(02)70139-4

A. M. Forster, Materials Testing Standards for Additive Manufacturing of Polymer Materials: State of the Art and Standards Applicability, Gaithersburg, MD, 2015, pp. 1-6.
https://doi.org/10.6028/NIST.IR.8059

A. Nabavi-Kivi, M. R. Ayatollahi, S. M. J. Razavi, Investigating the Effect of Raster Orientation on Fracture Behavior of 3D-Printed ABS Specimens under Tension-tear Loading. European Journal of Mechanics - A/Solids, vol. 99, n. 104944, 2023, pp. 1-7.
https://doi.org/10.1016/j.euromechsol.2023.104944

Q. Zuo, C. Wang, X. Pei, L. Lin, Y. Li, W. Sun, Analysis and Prediction of Tensile Properties Based on Rule of Mixtures Model for Multi-scale Ramie Plain Woven Fabric-reinforced Composite. Composite Structures, n. 116785, 2023, pp. 1-6.
https://doi.org/10.1016/j.compstruct.2023.116785

Malyuta, A. I. Daniel, K. L. Matteson, C. Ryan, M. P. Berry, D. Bajwa, An Investigation into the Tensile Properties of Recycled High-density Polyethylene (rHDPE) Blended with Talc Filler. Results in Materials, vol. 17, n. 100377, pp. 1-7.
https://doi.org/10.1016/j.rinma.2023.100377

Nuroji, N., Hung, C., Prasetya, B., Han, A., The Behavior of Reinforced Concrete Members with Section Enlargement Using Self-Compacting Concrete, (2020) International Review of Civil Engineering (IRECE), 11 (3), pp. 121-126.
https://doi.org/10.15866/irece.v11i3.18574

Jassam, S., Qasim, O., Maula, B., Effect of High Strength Concrete Prepared from Recycled Aggregates on the Behavior of Reinforced Concrete Beams Under Flexure, (2022) International Review of Civil Engineering (IRECE), 13 (5), pp. 376-396.
https://doi.org/10.15866/irece.v13i5.20463

Al-Quraishi, H., Abdulkhudhur, R., Abdulazeez, A., Shear Strength Behavior of Fiber Reinforced Recycled Aggregate Concrete Beams, (2021) International Review of Civil Engineering (IRECE), 12 (5), pp. 314-322.
https://doi.org/10.15866/irece.v12i5.19972

Suiffi, H., El Maliki, A., Cherkaoui, O., Dalal, M., Mechanical Properties and Ductility of a Concrete Matrix Reinforced with Polypropylene and Sisal Fibers, (2021) International Review of Civil Engineering (IRECE), 12 (3), pp. 199-208.
https://doi.org/10.15866/irece.v12i3.19963

Sultan, H., Mohammad, A., Qasim, O., Maula, B., Aziz, H., Ductility Factor Evaluation of Concrete Moment Frame Retrofitted by FRP Subjected to Seismic Loads, (2020) International Review of Civil Engineering (IRECE), 11 (6), pp. 275-282.
https://doi.org/10.15866/irece.v11i6.18670


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize