Open Access Open Access  Restricted Access Subscription or Fee Access

BIM of an Existing Road Using Advanced Monitoring Systems


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irea.v9i5.20726

Abstract


In the last decades, Building Information Modeling (BIM) has been mainly used in residential construction sector. However, considering its benefits in terms of data processing facilitation and high quality results, it has begun to be desirable also for transportation infrastructure design and management. In this framework, the introduction of new high efficiency equipment, based on advanced technology, for infrastructure survey and inventory, and the contemporary development of BIM applications are changing the perspective in the management of existing road infrastructures. In this paper, a study showing the application of BIM method for the implementation of an existing roadway starting from data collected through specific tools will be reported. As BIM software, Autodesk Civil 3D has been chosen, while detection surveys have been carried out through an Automatic Road ANalyzer (ARAN). BIM-based tools have been analyzed using IFC files, evaluating in conclusion the precision degree of the obtained results.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


BIM; Transportation; Roadway; Pavement; Design; Detection; Civil Engineering

Full Text:

PDF


References


R.Kreider, J. Messner, C. Dubler, Determining the frequency and impact of applying BIM for different purposes on projects, Proceedings of the 6th International Conference on Innovation in Architecture, Enginerering e Construction (AEC), Pennsylvania, USA,pp.9-11 (2010).

L. Barazzetti, and F. Banfi: BIM and GIS: when parametric modeling meets geospatial data, ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., IV-5/W1, 1-8, 2017.
https://doi.org/10.5194/isprs-annals-IV-5-W1-1-2017

A. Bradley, H. Li, R. Lark, S. Dunn - BIM for infrastructure: An overall review and constructor perspective, Automation in Construction, Volume 71, Part 2, 2016, Pages 139-152, ISSN 0926-5805.
https://doi.org/10.1016/j.autcon.2016.08.019

Doci, I., Hoti, B., Duraku, R., Model Design of Construction Crane and Motion Regulation Using Hardware Control and Programming, (2021) International Journal on Engineering Applications (IREA), 9 (1), pp. 8-18.
https://doi.org/10.15866/irea.v9i1.19373

A. Tibaut, S. Pečnik, M. R. Korošec, K. Mihalič, I. Zabreznik - BIM-based parametric modeling of roads and infrastructure objects, 2015.

A. Strafaci - BIM for road and highway design, EE Publisher 2010.

De Gaetani, Carlo I.; Mert, Mertkan; Migliaccio, Federica. 2020. Interoperability Analyses of BIM Platforms for Construction Management Appl. Sci. 10, no. 13: 4437.
https://doi.org/10.3390/app10134437

R. Ren and Jiansong Zhang, Comparison of BIM Interoperability Applications at Different Structural Analysis Stages, Construction Research Congress 2020.
https://doi.org/10.1061/9780784482865.057

F. Tang, T. Ma, Y. Guan, Z. Zhang, Parametric modeling and structure verification of asphalt pavement based on BIM-ABAQUS, Automation in Construction, Volume 111, 2020, 103066, ISSN 0926-5805.
https://doi.org/10.1016/j.autcon.2019.103066

Aaron Costin, Alireza Adibfar, Hanjin Hu, Stuart S. Chen, Building Information Modeling (BIM) for transportation infrastructure - Literature review, applications, challenges, and recommendations, Automation in Construction, Volume 94, 2018, Pages 257-281, ISSN 0926-5805.
https://doi.org/10.1016/j.autcon.2018.07.001

M. Mawlana, F. Vahdatikhaki, A. Doriani, A. Hammad Integrating 4D modeling and discrete event simulation for phasing evaluation of elevated urban highway reconstruction projects Autom. Constr., 60 (2015), pp. 25-38A.
https://doi.org/10.1016/j.autcon.2015.09.005

Volkov, P. Chelyshkov, Y. Grossman, A. Khromenkova, BIM cost analysis of transport infrastructure projects, IOP Conference Series: Earth and Environmental Science, Sci. 90 012203 - 2017.
https://doi.org/10.1088/1755-1315/90/1/012203

F. Abbondati, S. A. Biancardo, S. Palazzo, F. S. Capaldo, N. Viscione, I-BIM for existing airport infrastructures -Transportation Research Procedia Volume 45, 2020, Pages 596-603.
https://doi.org/10.1016/j.trpro.2020.03.052

S. Cafiso, A. Di Graziano, C. D'Agostino, G. Pappalardo, E. Delfino - A new perspective in the road asset management with the use of advanced monitoring system & BIM - MATEC Web Conf. Volume 231, 2018.
https://doi.org/10.1051/matecconf/201823101007

Eleonora Troiani, Abdul-Majeed Mahamadu, Patrick Manu, Ernest Kissi, Clinton Aigbavboa & Akponanabofa Oti (2020) Macro-maturity factors and their influence on micro-level BIM implementation within design firms in Italy, Architectural Engineering and Design Management, 16:3, 209-226.
https://doi.org/10.1080/17452007.2020.1738994

N. Bongiorno, G. Bosurgi, F. Carbone, O. Pellegrino, G. Sollazzo Periodica, Potentialities of a highway alignment optimization method in an I-BIM environment, Polytechnica Civil Engineering 63 (2), 352-361 (2019).
https://doi.org/10.3311/PPci.12220

S. A. Biancardo, N. Viscione, C. Oreto, R. Veropalumbo & F. Abbondati. (2020). BIM Approach for Modeling Airports Terminal Expansion. Infrastructures, 5(5), 41.
https://doi.org/10.3390/infrastructures5050041

S. A. Biancardo, F. Russo, R. Veropalumbo, V. Vorobjovas, G. Dell'Acqua, Modeling Roman Pavements Using Heritage-BIM: A Case Study in Pompeii, The Baltic Journal Of Road And Bridge Engineering, 020 Volume 15 Issue 3 (Special Issue): 34-46.
https://doi.org/10.7250/bjrbe.2020-15.482

H. Lai, X. Deng - Interoperability analysis of IFC-based data exchange between heterogeneous BIM software, Journal of civil engineering and management, 2018, 24 (7):537-55.
https://doi.org/10.3846/jcem.2018.6132

S. Cafiso, A. Di Graziano, Automated in-vehicle data collection and treatment for existing roadway alignment, in: Effic. Transp. Pavement Syst. Charact. Mech. Simulation, Model. - Proc. 4th Int. Gulf Conf. Roads, pp. 785-797 (2008) (Qatar, n.d.)
https://doi.org/10.1201/9780203881200.ch73

D M Savitri, Juliastuti and A A Pramudya - Clash detection analysis with BIM-based software on midrise building construction project - IOP Publishing Ltd IOP Conference Series: Earth and Environmental Science, Volume 426, The 3rd International Conference on Eco Engineering Development 13-14 November 2019, Solo, Indonesia.
https://doi.org/10.1088/1755-1315/426/1/012002

V.N. Gulin, A.A. Neretin and S.P. Paudyal; BIM of transport infrastructure - practical aspects of data collection for DTM creation (2020), IOP Conference Series: Materials Science and Engineering, Volume 832, International Conference on Digital Solutions for Automotive Industry, Roadway Maintenance and Traffic Control (DS ART 2019) 1 November 2019, Cholpon-Ata, Kyrgyzstan.
https://doi.org/10.1088/1757-899X/832/1/012048

Cafiso, S., D'Agostino, C., Delfino, E., Di Graziano, A., Information modeling for road asset management (2019) AIP Conference Proceedings 2116, 280003 (2019).
https://doi.org/10.1063/1.5114286

Cafiso, C. D'Agostino, C., E. Delfino, A. From manual to automatic pavement distress detection and classification. 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems, MT-ITS 2017, Article number 8005711, Pages 433-4385.
https://doi.org/10.1109/MTITS.2017.8005711

E. Ignatova, S. Zotkin, I. Zotkina, The extraction and processing of BIM data, IOP Conference Series: Materials Science and Engineering, Volume 365, Issue 6, Sci. Eng. 365 062033.
https://doi.org/10.1088/1757-899X/365/6/062033

Gilbert,Thomas; Barr, Stuart; James, Philip; Morley, Jeremy; Ji, Qingyuan. 2018. Software Systems Approach to Multi-Scale GIS-BIM Utility Infrastructure Network Integration and Resource Flow Simulation ISPRS Int. J. Geo-Inf. 7, no. 8: 310.
https://doi.org/10.3390/ijgi7080310

S. Cafiso, A. Di Graziano, G. Pappalardo, Safety Inspection and Management Tools for Low-Volume Road Network, Transp. Res. Rec. J. Transp. Res. Board. 2472 pp. 134-141 (2015).
https://doi.org/10.3141/2472-16

Arroyo Ohori, Ken; Diakité, Abdoulaye; Krijnen, Thomas; Ledoux, Hugo; Stoter, Jantien. 2018. Processing BIM and GIS Models in Practice: Experiences and Recommendations from a GeoBIM Project in The Netherlands ISPRS Int. J. Geo-Inf. 7, no. 8: 311.
https://doi.org/10.3390/ijgi7080311

Issa J. Ramaji, Ph.D., P.E., A.M.ASCE; John I. Messner, Ph.D., A.M.ASCE; and Ehsan Mostavi, Ph.D - IFC-Based BIM-to-BEM Model Transformation - Journal of Computing in Civil Engineering Volume 34 Issue 3 - May 2020.
https://doi.org/10.1061/(ASCE)CP.1943-5487.0000880

P. Gerbert, S. Castagnino, C. Rothballer, A. Renz and R. Filitz - Digital in Engineering and Construction: The Transformative Power of Building Information Modeling (2016).

S. Kubota, K. Hirota, M. Hoshika, M. Minami, Road maintenance support system using two-dimensional map and three-dimensional printed model, Proc. in International Conference on Civil and Building Engineering Informatics (ICCBEI), Apr. 19-21, Taipei, Taiwan, 2017, pp. 258-266.

K. Seo, S. Park, T. Kwon, S. Lee, Development of IFC-railway to manage the model data of railway infrastructures, Proc. in International Conference on Civil and Building Engineering Informatics (ICCBEI), Apr. 19-21, Taipei, Taiwan, 2017, pp. 339-342.

K. Makanae, The concept of information and knowledge management in civil infrastructure lifecycles, Proc. in International Conference on Civil and Building Engineering Informatics (ICCBEI), Apr. 19-21, Taipei, Taiwan, 2017, pp. 343-346.

D. Sarkar, Risk based building information modeling (BIM) for urban infrastructure transport project, Adv. Eng. Inform. 10 (8) (2016) 1022-1026.

Hatem, W., Maula, B., Improving Project Monitoring by Integrating BIM with Augmented Reality, (2020) International Review of Civil Engineering (IRECE), 11 (6), pp. 304-310.
https://doi.org/10.15866/irece.v11i6.19358

Ngah Nasaruddin, A., Boon Tuan, T., Musthafah, M., Building Information Modelling (BIM) on Energy Performance Assessment: a Review, (2018) International Review of Mechanical Engineering (IREME), 12 (8), pp. 663-671.
https://doi.org/10.15866/ireme.v12i8.13575

Ruiz, P., Pucharelli Fontanini, P., Corrêa, F., Materials Flow Investigation: an Aluminum Frames Supply Chain Simulation, (2019) International Review on Modelling and Simulations (IREMOS), 12 (1), pp. 30-36.
https://doi.org/10.15866/iremos.v12i1.15952


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize