Open Access Open Access  Restricted Access Subscription or Fee Access

New Methods for Calculating the Impact Force of the Mechanical Stabilizer Bar on a Vehicle


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/irea.v9i5.19584

Abstract


The problem of the lateral instability of the vehicle is a top concern. When the vehicle steers at high speed, it may rollover. In order to limit this situation, the solution of using the stabilizer bar is proposed. This research focuses on establishing the spatial dynamic vehicle model (10 DOF) to simulate the oscillation of the vehicle. Besides, this research has established a new method for calculating the impact force of the stabilizer bar on a vehicle. This method is very intuitive, simple, and highly accurate. The results of the research have indicated that when the vehicle has been equipped with the stabilizer bar, the roll angle of the vehicle has been reduced. At high speeds and a large steering angle, the value of the impact force of the stabilizer bar increases significantly. The value of the impact force of the stabilizer bar at the rear axle is usually larger than the front axle. The new method established in this research may be applied to other researches in the future.
Copyright © 2021 Praise Worthy Prize - All rights reserved.

Keywords


Stabilizer Bar; Dynamic Vehicle Model; Impact Force; Rollover

Full Text:

PDF


References


K. Parczewski, H. Wnek, The Influence of Vehicle Body Roll Angle on the Motion Stability and Maneuverability of the Vehicle, Combustion Engines, vol. 168, n. 1, 2017, pp. 133-139.
https://doi.org/10.19206/CE-2017-121

Z. Jin, J. Li, Y. Huang, A. Khajepour, Study on Rollover Index and Stability for a Triaxle Bus, Chinese Journal of Mechanical Engineering, vol. 32, 2019, pp. 1-15.
https://doi.org/10.1186/s10033-019-0376-0

T.A. Nguyen, T.B. Hoang, Research on Determining the Limited Roll Angle of Vehicle, Proceedings of the International Conference on Engineering Research and Application, 2019, Thai Nguyen, Viet Nam.

T.A. Nguyen, T.B. Hoang, Determining the Vertical Force When Steering, Advances in Systems Science and Applications, vol. 20, n. 4, 2020, pp. 27-35.
https://doi.org/10.25728/assa.2020.20.4.870

S.B., Tuljapure, L.S. Kanna, Analysis on Stability Bar, Advanced Materials Manufacturing & Characterization, vol. 3, n. 1, 2013, pp. 349-353.
https://doi.org/10.11127/ijammc.2013.02.064

I. Javanshir, A. Maseleno, S. Tasoulian, M. Oveisi, Optimization of Suspension System of Heavy off-road Vehicle for Stability Enhancement using Intergrated Anti-roll Bar and Coiling Spring Mechanism, Journal of Central South University, vol. 25, 2018, pp. 2289-2298.
https://doi.org/10.1007/s11771-018-3913-6

J. Liu, F. Jiang, Study on Influence Analysis of Vehicle Steering Gains Based on ADAMS/Car of Suspension Torsion Bar and Anti-roll Bar, Applied Mechanics and Materials, vol. 278-280, 2013, pp. 239-244.
https://doi.org/10.4028/www.scientific.net/AMM.278-280.239

Almaged, M., Noaman, M., Mahmood, A., Hero, N., ISO Stress Analysis and Micro Geometry Corrections of Parallel Axis Gearbox Using Dontyne Systems Gear Production Suite, (2020) International Journal on Engineering Applications (IREA), 8 (5), pp. 194-201.
https://doi.org/10.15866/irea.v8i5.19420

Di Massa, G., Pastore, S., Russo, R., Timpone, F., Precursors of Instability for a Vehicle Traveling in Curve, (2019) International Review on Modelling and Simulations (IREMOS), 12 (1), pp. 1-15.
https://doi.org/10.15866/iremos.v12i1.16902

T.A. Nguyen, T.B. Hoang, T.T. Tran, Optimization of the Stabilizer Bar by Using Total Scores Method, Advances in Science, Technology, and Engineering Systems Journal, vol. 5, n. 1, 2020, pp. 431-435.
https://doi.org/10.25046/aj050155

T.A. Nguyen, T.B. Hoang, Research on Dynamic Vehicle Model Equipped Active Stabilizer Bar, Advances in Science, Technology and Engineering Systems Journal, vol. 4, n. 4, 2019, pp. 271-275.
https://doi.org/10.25046/aj040434

T.A. Nguyen, Establishing the Dynamic Vehicle Model using the Active Stabilizer Bar, Master Thesis, Automotive Engineering Department, Hanoi University of Science and Technology, Hanoi, Vietnam, 2019.

V.T. Vu, O. Sename, L. Dugard, P. Gaspar, H¥/LPV Controller Design for an Active Anti-roll Bar System of Heavy Vehicles using Parameter Dependent Weighting Functions, Heliyon, vol. 5, 2019, pp. 1-11.
https://doi.org/10.1016/j.heliyon.2019.e01827

V.T. Vu, Enhancing the Roll Stability of Heavy Vehicles by using an Active Anti-roll Bar System, Ph.D. Thesis, Communaute University Grenoble Alpes, France, 2017.

J.H. Paes, D. Colon, Comparison between Passive and Active Flexible Anti-roll Bars Modelled by Finite Element Method on Prevention of Vehicle Rollovers, Proceedings of the XXII Congresso Brasileiro de Automatica, 2018, Brasil.

H. Agrawal, J. Gustafsson, Investigation of an Active Anti-roll Bars and Development of Control Algorithm, Master Thesis, Department of Aeronautical and Vehicle Engineering, KTH Royal Institute of Technology, Stockholm, Sweden, 2017.

Z.X. Li, R.Z. Xu, H. Jiang, Roll Stiffness Optimization for Anti-roll Bar in Interconnected Air Suspension, Journal of Applied Science and Engineering, vol. 19, n. 3, 2016, pp. 293-302.

S. Yim, K. Jeon, K. Yi, An Investigation into Vehicle Rollover Prevention by Coordinated Control of Active Anti-roll Bar and Electronic Stability Program, International Journal of Control, Automation, and Systems, vol. 10, n. 2, 2012, pp. 275-287.
https://doi.org/10.1007/s12555-012-0208-9

N. Zulkarnain, H. Zamzuri, S.A. Mazlan, Ride and Handling Analysis for an Active Anti-roll Bar: Case Study on Composite Nonlinear Control Strategy, International Journal of Automotive and Mechanical Engineering, vol. 10, no. 2, 2014, pp. 2122-2142.
https://doi.org/10.15282/ijame.10.2014.28.0179

N. Zulkarnain, F. Imaduddin, H. Zamzuri, S.A. Mazlan, Application of an Active Anti-roll Bar System for Enhancing Vehicle Ride and Handling, Proceedings of the 2012 IEEE Colloquium on Humanities, Science & Engineering Research, 2012, Sabah, Malaysia.
https://doi.org/10.1109/CHUSER.2012.6504321

P.H. Cronje, P.S. Els, Improving off-road Vehicle Handling using an Active Anti-roll Bar, Journal of Terramechanics, vol. 47, 2010, pp. 179-189.
https://doi.org/10.1016/j.jterra.2009.09.003

J. Marzbanrad, G. Soleimani, M. Mahmoodik, A.H. Rabiee, Development of Fuzzy Anti-roll Bar Controller for Improving Vehicle Stability, Journal of Vibroengineering, vol. 17, n. 7, 2015, pp. 3856-3864.

S.G. Brisson, M. Bouazara, M.J. Richard, Design of an Active Anti-roll Bar for off-road Vehicles, Shock and Vibration, vol. 16, 2009, pp. 155-174.
https://doi.org/10.1155/2009/343048

N. Zulkarnain, H. Zamzuri, S.A. Saruchi, M.M. Mustafa, S.S. Mokri, N. Wahid, S.N.Z. Ahmmad, A. Jedi, Newly Developed Nonlinear Vehicle Model for an Active Anti-roll Bar System, Bulletin of Electrical Engineering and Informatics, vol. 7, n. 4, pp. 529-537.
https://doi.org/10.11591/eei.v7i4.1185

T.A. Nguyen, Establishing the Dynamics Model of the Vehicle Using the 4-Wheels Steering Systems, Mathematical Modelling of Engineering Problems, vol. 7, n. 3, 2020, pp. 436-440.
https://doi.org/10.18280/mmep.070314

T.A. Nguyen, Control the Hydraulic Stabilizer Bar to Improve the Stability of the Vehicle When Steering, Mathematical Modelling of Engineering Problems, vol. 8, n. 2, 2021, pp. 199-206.
https://doi.org/10.18280/mmep.080205

F. Xiong, F. Lan, J. Chen, Y. Zhou, The Study for Anti-Rollover Performance Based on Fishhook and J Turn Simulation, Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering, 2015, Guangzhou, China.
https://doi.org/10.2991/ic3me-15.2015.401


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize