Open Access Open Access  Restricted Access Subscription or Fee Access

Effect of Fabric Layer on Sound Absorption of Micro-Perforated Panel

(*) Corresponding author

Authors' affiliations



Micro-Perforated Panel (MPP) absorber becomes an alternative to common fibrous porous absorber without owning health and environmental issues. The system is considered as the next generation of absorber in noise control. However, such a system suffers from narrow absorption bandwidth  so that its application becomes limited. Theoretically, the frequency range with effective absorption is determined by the surface acoustic impedance controlled by the perforation ratio, hole diameter and cavity depth. Hence, by keeping those parameters to be constant, an intervention to the change of impedance is expected to be useful in widening the absorption bandwidth. In this research, textile materials from woven fabrics namely cotton fabric, plain fabric and satin fabric were used to cover the surface of Micro Perforated Panel (MPP) absorber either at the front or at the back surface. The sound absorption coefficients were measured for the normal incidence using an impedance tube. From the measured results, it is found that the presence of the fabric on MPP surface can improve the MPP absorber in terms of amplitude as well as the frequency bandwidth of absorption. Moreover, the placement of the woven fabric at downstream area is more beneficial than at the upstream area.
Copyright © 2020 Praise Worthy Prize - All rights reserved.


Micro Perforated Panel; Textile Acoustics; Sound Absorber; Sound Absorption

Full Text:



C. Lacoste, M-C. Basso, A. Pizzi, A. Celzard, E. Ella Ebang, N. Gallon and B. Charrier, Pine (P. pinaster) and quebracho (S. lorentzii) tannin-based foams as green acoustic absorbers, Industrial Crops and Products, vol. 67, 2015, pp. 70 - 73.

E. Taban, A. Khavanin, A. Ohadi, A. Putra, A.J. Jafari, M. Faridan and A. Soleimanian, Study on the acoustic characteristics of natural date palm fibres: Experimental and theoretical approaches, Building and Environment, vol. 161, 106274, 2019.

K. H. Or, A. Putra and M. Z. Selamat, Oil palm empty fruit bunch fibres as sustainable acoustic absorber, Applied Acoustics, vol. 119, 2017, pp. 9 -16.

A. Putra, F.A. Khair, M.J.M. Nor, Utilizing hollow-structured bamboo as natural sound absorber, Archive of Acoustics, vol. 40, no. 4, pp. 601-608, 2015.

Sambu, M., Yahya, M., Latif, H., Zaman, I., Ghazali, M., Investigation on Acoustical and Physical Characteristics of Kenaf Intermix with Natural Rubber, (2016) International Review of Mechanical Engineering (IREME), 10 (4), pp. 284-288.

D. Y. Maa, Potential of microperforated panel absorber, Journal of the Acoustical Society of America, vol. 104, no. 5, 1998, pp. 2861 - 2866.

Egab, L., Wang, X., Mazlan, S., Choo, M., Development of Empirical Models of Polyfelt Fibrous Materials for Acoustical Applications, (2013) International Review of Mechanical Engineering (IREME), 7 (5), pp. 939-946.

Kassim, D., Putra, A., Mohd Nor, M., Hamzah, A., Preliminary Study of Acoustical Treatment in a Scaled Model Mosque, (2017) International Review of Mechanical Engineering (IREME), 11 (4), pp. 222-227.

K. Sakagami, M. Morimoto, M. Yairi, and A. Minemura, A pilot study on improving the absorptivity of a thick microperforated panel absorber, Applied Acoustics, vol. 69, no. 179, 2008, pp. 179-182.

S. S. Jung, Y. T. Kim, D. H. Lee, H. C. Kim, S. I. Cho and J. K. Lee, Sound absorption of microperforated panel, Journal-Korean Physical Society, vol. 50, no. 4, 2007, pp. 1044.

K. Sakagami, K. Matsutani and M. Morimoto, Sound absorption of a double-leaf micro-perforated panel with an air-back cavity and a rigid-back wall: Detailed analysis with a Helmholtz-Kirchhoff integral formulation, Applied Acoustics, vol. 71, no. 5, 2010, pp. 411 - 417.

K. Sakagami, Y. Nagayama, M. Morimoto and M. Yairi, Pilot study on wideband sound absorber obtained by combination of two different microperforated panel (MPP) absorbers, Acoustical Science Technology, vol. 30, no. 2, 2009, pp. 154 - 156.

I. Prasetiyo, J. Sarwono, I. Sihar, Study on inhomogeneous perforation thick micro-perforated panel sound absorbers, Journal of Mechanical Engineering and Sciences, vol. 10, 2016, pp. 2350-2362.

A.I. Mosa, A. Putra, R. Ramlan, I. Prasetiyo, A. Esraa, Theoretical model of absorption coefficient of an inhomogeneous MPP absorber with multi-cavity depths, Applied Acoustics, vol. 146, 2019, pp. 409-419.

Qian, D. Kong, S. Liu, S. Sun and Z. Zhao, Investigation on micro-perforated panel absorber with ultra-micro perforations, Applied Acoustics, vol. 74, no. 7, 2013, pp. 931-935.

I. Prasetiyo, G. Desendra, M. Hermanto, and D.R. Adhika, On Woven Fabric Sound Absorption Prediction, Archives of Acoustics, 43, 4, pp. 707–715, 2018.

I. Prasetiyo, E. Muqowi, A. Putra, M. Novembrianti, G. Desendra, and D.R. Adhika, Modelling sound absorption of tunable double layer woven fabrics, Applied Acoustics, Vol. 157, 2020.

R. Pieren, Sound absorption modeling of thin woven fabrics backed by an air cavity, Textile Research Journal, vol. 81, no. 9, 2012, pp. 864-874.

F. Shahani, P. Soltani and M. Zarrebini, The Analysis of Acoustic Characteristics and Sound Absorption Coefficient of Needle Punched Nonwoven Fabrics, Journal of Engineered Fabrics & Fibers, vol. 9, no. 2, 2014.

R. Pieren and K. Heutschi, Predicting sound absorption coefficients of lightweight multilayer curtains using the equivalent circuit method, Applied Acoustics, vol. 92, 2015, pp. 27-41.

BS EN ISO 10534 - 2: Acoustics - Determination of sound absorption coefficients and impedance in impedance tube - Part 2: Transfer function method, 2001.


  • There are currently no refbacks.

Please send any question about this web site to
Copyright © 2005-2024 Praise Worthy Prize