Design and Development of an Onion Peeler
the author of the article can submit here a request for assignment of a DOI number to this resource!
Cost of the service: euros 10,00 (for a DOI)
An industrial onion peeler and cutter having a high throughput of peeled and cut onions. The peeler has a simplified peeling mechanism that minimizes the manipulation of individual unions. The peeling mechanism is simple to maintain, minimizing downtime associated with maintenance. The peeler is also using the mechanism which can will peel all the onions in a large quantity. So, it's more useful compare by use hand which is only small quantity can produce to peel the onion. The simplified peeling mechanism will rotate the onion in one direction with high speed. When onion rotates, it will have the friction between the onion and the wall. The union also will touch the rough brush which is can make all the skin of an onion peeled. Some of the skin of an onion will move down through the mechanism that will allow the union going to the cutter. That mechanism almost same with conveyer. Beside peeler, the machines also have the cutter. After onion already peeled, it will move down through the small way going to the cutter. The cutter mechanism is also simple and easy for maintenance. This cutter will cut the onion one by one by using puncher. It quicker compares cutting using hand because with one punch many slices will produce. So it will reduce time of cut. The hand is used to push the puncher with high force so onion will easily cut without damage the whole onion. The cutter is very sharp and has a small size of a slice of onion that will be produced and no damage onion will produce. Then, anyone that already cut will fall down to the container
Copyright © 2013 Praise Worthy Prize - All rights reserved.
Baxter M., “Product Design: Practical Methods for the Systematic Development of New Products”, Chapman & Hall, London, 1995.
Karl T. Ulrich & Steven D. Eppinger, “Product Design and Development”, Third Edition. Mc Graw Hill, 2004.
Kevin Otto & Kristin Wood, “Product Design: Techniques in Reverse Engineering and New Product development”, Prentice Hall, 2001.
G. Boothroyd, P. Dewhurst, W. Knight, “Product Design for Manufacture and Assembly”, 2nd Edition, Marcel Dekker Inc., 2002.
Henry W. Stoll, “Product Design Methods and Practices”, Marcel Dekker Inc., New York, 1999.
B.Hyman, “Fundamental of Engineering Design”, 2nd Edition, New Jersey: Prentice Hall, 2003
Ullman, D.G. “The Mechanical Design Process”, 2nd Edition, McGraw Hill International Edition, 1997.
Dieter G. E., “Engineering Design – A Materials and Processing Approach”, Mc Gram Hill, 1991.
Rudolph J Eggert, “Engineering Design”, New Jersey: Prentice Hall, 2005.
Fred E. Meyers, Matthew P. Stephens, “Manufacturing Facilities Design and Material Handling”, Prentice Hall, 2004.
Niebel , Benjamin, Freivalds & Andris, “Methods, Standards, & Work Design”, 11th Edition, 2003.
R.K Dhawan, “Lukisan Mesin: Dalam Unjuran Sudut Pertama”, Cetakan Pertama, Golden Books Centre Sdn. Bhd., 2002.
Frederick E. Giesecke, Henry Cecil Spencer, John Thomas Dygdon, Alva Mitchell, Ivan Leroy Hill, James E Novak, “Technical Drawing” 10th Edition., Prentice Hall, 2002.
Hamzas, M.F.M.A.,Bareduan, S.A., Tajul, L.,Hussin, M.S., Zailani, Z.A., Hadi, H., Development of improved bottleneck-based heuristic for re-entrant flow shop with dominant machine at M1 and M4, (2012) International Review of Mechanical Engineering (IREME) 6 (3), pp. 501-506.
Hussin, M.S., Hamzas, M.F.M.A., Hasnul, M.J.,Zailani, Z.A., Sanuddin, A.B., Design and fabrication of a die for molding test press, (2012) International Review of Mechanical Engineering (IREME) 6 (6), pp. 1257-1261.
Hussin, M.S., Hussin, M.S., Sanuddin, A.B., Hamzas, M.F.M.A., Zailani, Z.A., Hasnul, M.J., Bracket assembly tail failure: Identification of causes and proposal for design improvement, (2012) International Review of Mechanical Engineering (IREME) 6 (6), pp. 1245-1252.
- There are currently no refbacks.
Please send any question about this web site to firstname.lastname@example.org
Copyright © 2005-2020 Praise Worthy Prize