| Issue | Title | |
| Vol 7, No 2 (2013) | Analysis and Modeling of Heat Generation in Overcharged Li-Ion Battery with Passive Cooling | Abstract |
| Paul T. Coman, Christian T. Veje | ||
| Vol 7, No 1 (2013) | Analysis and Optimization of Grasping Force in the Case of Multi-Robots Cooperation | Abstract |
| A. Khadraoui, C. Mahfoudi, A. Zaatri, K. Djouani | ||
| Vol 8, No 3 (2014) | Analysis of a Stainless Steel Heat Pipe based on Operation Limits | Abstract |
| Paulo Henrique Dias dos Santos, Larissa Krambeck, Diogo Luiz Figueiredo dos Santos, Thiago Antonini Alves | ||
| Vol 7, No 4 (2013) | Analysis of Bifurcations, Rattle and Chaos in a Gear Transmission System | Abstract |
| R. Brancati, U. Montanaro, E. Rocca, S. Santini, F. Timpone | ||
| Vol 7, No 7 (2013) | Analysis of Burr Formation and Surface Roughness in Step Drilling of AA 2024– SiC - Fly Ash Hybrid Composites | Abstract |
| M. Mahendra Boopathi, K. P. Arulshri, P. Shanmughasundaram | ||
| Vol 7, No 6 (2013) | Analysis of Cenosphere - Aluminium Metal Matrix Composite for Engine Block | Abstract |
| V. Saravanan, P. R. Thyla, S. R. Balakrishnan | ||
| Vol 9, No 4 (2015) | Analysis of Charcoal Gasification on a Downdraft Fixed Bed Gasifier by CFD Modeling | Abstract |
| Carlos Andrés Forero-Núñez, Santiago Ramirez-Rubio, Fabio Emiro Sierra-Vargas | ||
| Vol 13, No 9 (2019) | Analysis of Conductive, Convective and Radiative Heat Transfer in Longitudinal Fins of Variable Profiles | Abstract |
| Ahmed S. Sowayan, Syed M. F. Hasani | ||
| Vol 8, No 3 (2014) | Analysis of Fuel Flow in Internal Combustion Engine Using –CFD | Abstract |
| S. Rajendran, K. Purushothaman | ||
| Vol 7, No 4 (2013) | Analysis of Hammer Head at Increased Flow Demand in Pipe Networks: a Case Study | Abstract |
| Subhasish Das, Biprodip Mukherjee, Asis Mazumdar | ||
| Vol 8, No 3 (2014) | Analysis of Humidified Air Circulation Over the Air Cooled Condenser of Vapour Compression Refrigeration System with Eco Friendly Refrigerants | Abstract |
| P. Thangavel, D. Deepa, P. Somasundaram, P. Selvakumar | ||
| Vol 14, No 9 (2020) | Analysis of Inspection Scheduling Program on Condensate Atmospheric Storage Tank Using Risk Based Inspection | Abstract |
| Muhammad Badrus Zaman, Nurhadi Siswantoro, Fitra Didit Luciawan | ||
| Vol 12, No 11 (2018) | Analysis of Oar Blade Hydrodynamics for Rowing Propulsive Mechanism: Experiment and Computational Fluid Dynamics Simulation | Abstract |
| Ab Aziz Mohd Yusof, Abdul Hafidz Hj. Omar, Ardiyansyah Syahrom, Muhamad Noor Harun | ||
| Vol 11, No 7 (2017) | Analysis of Propeller Shaft of a SUV Under Static and Fatigue Loading | Abstract |
| S. S. Patil, S. P. Gurav, S. G. Joshi | ||
| Vol 15, No 7 (2021) | Analysis of Salinity from Seawater on Physical and Mechanical Properties of Laminated Bamboo Fiber Composites with an Epoxy Resin Matrix for Ship Skin Materials | Abstract |
| Parlindungan Manik, Agus Suprihanto, Sulardjaka Sulardjaka, Sri Nugroho | ||
| Vol 17, No 2 (2023) | Analysis of the Chemical Composition of Ash and Slag Waste from Solid Fuel Combustion for Sale as Raw Materials | Abstract |
| Gulim Bergenzhanova, Markhabat Sakitzhanov, Karlygash Serikovna Olzhabayeva, Ainur Serikovna Rasmukhametova, Lyazzat Kazahbaievna Sultanova | ||
| Vol 9, No 2 (2015) | Analysis of the Effect on the Mechanical Injection Engine Using Doped Diesel Fuel by Ethanol and Bio-Oil | Abstract |
| Nattan Roberto Caetano, R. Cataluña, H. A. Vielmo | ||
| Vol 10, No 1 (2016) | Analysis of the Impact of the Variable Cam Tree in the Efficiency of Cycle Otto Engines | Abstract |
| Fábio Jairo Dias, Ezio Castejon Garcia | ||
| Vol 15, No 10 (2021) | Analysis of the Sealing Performance of a Concave O-Ring Groove | Abstract |
| EL Mehdi El Bahloul, Mohammed Diany, Hicham Aissaoui, Elhassan Boudaia, Mustapha Mabrouki | ||
| Vol 15, No 11 (2021) | Analysis of the Tribological and Dynamic Characteristics of the Piston Compression Ring Under Different Engine Operating Conditions | Abstract |
| Carlos Pardo García, Jhon Antuny Pabon, Marlen Fonseca Vigoya | ||
| Vol 16, No 7 (2022) | Analysis of Thermomechanical Cracks of Disc Brake Used in Heavy Trucks | Abstract |
| Welteji Bena, Hirpa G. Lemu | ||
| Vol 11, No 8 (2017) | Analytic and Finite Element Solution of Temperature Profiles in Welding for Transient State and Quasi Steady State Using Point Heat Source Model | Abstract |
| Djarot B. Darmadi | ||
| Vol 7, No 1 (2013) | Analytical and Experimental Investigation on Cutting Temperature in Turning AISI 304 Austenitic Stainless Steel Using AlTiCrN Coated Carbide Insert | Abstract |
| Atul P. Kulkarni, Girish G. Joshi, Amit Karekar, Vikas G. Sargade | ||
| Vol 9, No 2 (2015) | Analytical and Numerical Investigations on Buckling of an Axially Compressed Cylindrical Panel with Specific Boundary Condition | Abstract |
| S. E. Afkhami, Vahid Maleki, M. Niazi, M. Abbasi | ||
| Vol 10, No 7 (2016) | Analytical Energetic Approach for Predictive Generation of Dynamic Biped Walking - Use of Average Energies | Abstract |
| Samer Alfayad, Olivier Bruneau, Fethi Ben Ouezdou, Moustafa Ahmed Fouz, Paul Francois Doubliez | ||
| 101 - 125 of 1149 Items | << < 1 2 3 4 5 6 7 8 9 10 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize