| Issue | Title | |
| Vol 9, No 4 (2015) | Investigation of Film Cooling Effectiveness Enhancement by Using Corrugated Spiral Holes | Abstract |
| Ammar Fakhir Abdulwahid, Tholudin Mat Lazim, Aminuddin Saat, Zaid Sattar Kareem | ||
| Vol 15, No 3 (2021) | Investigation of Natural Frequency and Damping Ratio Due to Flow-Induced Vibration in a Finned Tube Subjected to Cross-Flow | Abstract |
| Pravin Hindurao Yadav, Dillip Kumar Mohanty | ||
| Vol 7, No 4 (2013) | Investigation of Optimal Parameters for Tensile Strength Property of ABS in Rapid Prototyping | Abstract |
| M. S. Bahari, A. B. Sanuddin, I. K. Marlina | ||
| Vol 7, No 1 (2013) | Investigation of Palm Fatty Acid Distillate as an Alternative Lubricant of Petrochemical Based Lubricants, Tested at Various Speeds | Abstract |
| I. Golshokouh, S. Syahrullail, F. N. Ani, H. H. Masjuki | ||
| Vol 16, No 11 (2022) | Investigation of the Dynamic Behaviour of Fluid Film Journal Bearings with the Use of Bio-Lubricants | Abstract |
| Tariq Mohammad Hammza | ||
| Vol 13, No 11 (2019) | Investigation of the Effect of Natural Gas Injection Timing on Dual-Fuel Engine Emissions Using Split Injection Strategies | Abstract |
| Frengki Mohamad Felayati, Semin Semin, Beny Cahyono, Rosli Abu Bakar | ||
| Vol 7, No 6 (2013) | Investigation of the Flow Characteristics in a Sink-Swirl Flow within Two Disks | Abstract |
| Ali M. Jawarneh | ||
| Vol 7, No 7 (2013) | Investigation of the Tensile Strength of New Palm Oil Based Wax/ HDPE/ Palm Oil Fiber Blends by Using Full Factorial Design | Abstract |
| A. N. M. Khalil, M. F. M. A. Hamzas, M. S. Hussin, Z. A. Zailani, A. B. Sanuddin | ||
| Vol 17, No 10 (2023) | Investigation of Track Condition Effects on Fatigue of High-Speed Train Bogie Frames | Abstract |
| Adhi Dharma Permana, Rama Primadi Putera | ||
| Vol 10, No 4 (2016) | Investigation on Acoustical and Physical Characteristics of Kenaf Intermix with Natural Rubber | Abstract |
| Mathan Sambu, Musli Nizam Yahya, Hanif Abdul Latif, Izzuddin Zaman, Mohd Imran Bin Ghazali | ||
| Vol 14, No 5 (2020) | Investigation on Effecting Parameters of the Wind Disturbance on Stability of the Steering System | Abstract |
| Haider Jabaur Abid, Aseel Ali Hussien | ||
| Vol 11, No 2 (2017) | Investigation on Failure Strength of Bolted Joints Woven Fabric Reinforced Hybrid Composite | Abstract |
| Dhar Malingam Sivakumar, Lin Feng Ng, Raymond Mitchell Chew, Omar Bapokutty | ||
| Vol 13, No 2 (2019) | Investigation on Microstructure and Mechanical Properties of Gas Metal Arc Welded Dissimilar Aluminium Alloys | Abstract |
| Cyril Vimalraj, Paul Kah, Eric Mvola Belinga, Pavel Layus, Harri Eskelinen | ||
| Vol 7, No 2 (2013) | Investigation on Thermal Balance of CI Engine Fuelled by Pongamia Pinnata Biodiesel and Hydrogen as Secondary Fuel | Abstract |
| C. Jegadheesan, P. Somasundaram | ||
| Vol 16, No 9 (2022) | Investigation on Water Immersing and Spraying for Cooling PV Panel | Abstract |
| Dana Khadem Al-Jamea, Ismail Al-Masalha, Abdel Salam Y. Alsabagh, Omar Badran, Hussein Maaitah, Omar M. S. Al-Mashaqbeh | ||
| Vol 8, No 6 (2014) | Investigations of Energy Savings in Bulk Milk Cooler by Waste Heat Recovery | Abstract |
| S. N. Sapali, Shivling Mahaling Pise, A. T. Pise, Dinkar V. Ghewade | ||
| Vol 16, No 7 (2022) | Investigative Analysis of Radial Inflow Turbine Based on Loss Model for Cryogenic Turboexpander | Abstract |
| Anumay Kumar, Amrik Singh | ||
| Vol 17, No 5 (2023) | Jerk Reduction in the Thread Take-Up Lever Mechanism of a Sewing Machine | Abstract |
| Kelvin Ribeiro de Faria Santos, Marco Tulio Correa de Faria Faria | ||
| Vol 10, No 7 (2016) | Jerk Trajectory Planning for Assistive and Rehabilitative Mechatronic Devices | Abstract |
| Francesco Aggogeri, Alberto Borboni, Nicola Pellegrini | ||
| Vol 8, No 5 (2014) | Jet Dynamics of Co-Axial Dual Compressible Jets for Different Exit Velocity Ratios | Abstract |
| A. B. Bhasi, M. D. Bindu, P. S. Tide | ||
| Vol 11, No 8 (2017) | Kinematic and Manipulability Analysis of Hybrid Robot Used in Tele-Echography Application | Abstract |
| Dikra El Haiek, Badreddine Aboulissane, Jalal El Bahaoui, Larbi El Bakkali | ||
| Vol 10, No 1 (2016) | Kinematic Synthesis of Planar, Shape-Changing Rigid Body Mechanisms for 30P30N Slat Design Profile | Abstract |
| Mohammad Hazrin Ismail, Shamsul Anuar Shamsudin, Mohd Nizam Sudin | ||
| Vol 10, No 6 (2016) | Kinematics Analysis of a Leg Mechanism as a Motion Converter | Abstract |
| Ahmad Syuhri, Hari Arbiantara Basuki, Skriptyan Noor Hidayatullah Syuhri | ||
| Vol 12, No 6 (2018) | Kinetic Reaction Modeling of the Reduction Zone of Bamboo Gasification in a Fixed Bed Downdraft Gasifier | Abstract |
| Oscar Daniel Sánchez Plazas, Alejandro Lyons, Fabio Emiro Sierra Vargas | ||
| Vol 14, No 6 (2020) | Laminar-Turbulent Transition on a Cambered NACA 16-009 Airfoil at Low Speed | Abstract |
| Benoît G. Marinus, Jan Vercauteren, Robin Vandenberghe, Julie Smeulders | ||
| 626 - 650 of 1149 Items | << < 21 22 23 24 25 26 27 28 29 30 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize