| Issue | Title | |
| Vol 10, No 1 (2016) | Implementing a Risk-Based Inspection Framework in an Aluminum Industry | Abstract |
| Vrassidas I. N. Ioannis Leopoulos, George Koutsoupis | ||
| Vol 14, No 12 (2020) | Improved Pyramid Solar Still for Solar Water Desalination – A Case Study | Abstract |
| Abed Alrzaq Alshqirate, Mohamed A. Essa, El-Sayed Ibrahim Abdel Aziz | ||
| Vol 13, No 3 (2019) | Improvement Approaches for the Combustion Process of Recent Diesel Natural Gas Dual Fuel Engines – A Technical Review | Abstract |
| Semin Semin, Frengki Mohamad Felayati, Beny Cahyono, Muhammad Badrus Zaman | ||
| Vol 13, No 8 (2019) | Improvement in the Performance of a Solar Hot Air Generator Using a Circular Cone | Abstract |
| Ahmedou Mohamed Mahmoud, Zeinebou Yahya | ||
| Vol 16, No 1 (2022) | Improvement of a Technology of Use of a Road Milling Machine for Opening Cracks in Asphalt Concrete Pavements | Abstract |
| Zarina Issabek, Zhannat Kadyrov, Alina Kim | ||
| Vol 9, No 3 (2015) | Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators | Abstract |
| Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, Mir Md. Maruf Morshed | ||
| Vol 15, No 11 (2021) | Improvement of Technology, Machines, and Recipes for the Production of Compound Feed and Feed Additives for Farm Animals | Abstract |
| Yelibek Asangaliev, Vadim Kim, Alina Kim, Mikhail Doudkin, Mikhail Danilov, Georgy Guryanov | ||
| Vol 16, No 6 (2022) | Improvement of the Design of the Unit for Automatic Graded Spreader | Abstract |
| Bekzat Yeserkegenova, Zhannat Kadyrov, Alina Kim, Elmira Begimkulova | ||
| Vol 16, No 9 (2022) | Improvement of the Mechanical Properties of Reinforcing Bar Steel by Combined Deformation-Heat Treatment | Abstract |
| Makpal Jaxymbetova, Amangel'di Kanayev, Indira Kossanova, Igor Mazur, Abdulla Akhmedyanov, Kamilya Kirgizbayeva | ||
| Vol 9, No 4 (2015) | Improvement Research on Quality Management Systems and Executive Ability Effect in the Chinese Welding Industry | Abstract |
| Xiaochen Yang, Paul Chu Kah, Ming Sun | ||
| Vol 16, No 3 (2022) | Improving Biogas Yield Production at Room Temperature by Chemical Pretreatment | Abstract |
| Mohamed El Amine Dahou, Mohammed Hadj Kouider, Siham Dehmani, Said Slimani, Abdelmadjid Habchi | ||
| Vol 15, No 8 (2021) | Improving the Cascade Solar Still Performance Using Baffles Fixed on the Absorber Plate: Experimental Study | Abstract |
| Nidal Mouhsin, Mariam Bouzaid, Mourad Taha-Janan | ||
| Vol 7, No 3 (2013) | Improving Warpage on Thin Shallow Parts in Two-Plate Moulds with Conformal Cooling Channels | Abstract |
| Z. Shayfull, M. S. Bahari, S. A. Adam, S. M. Nasir, Z. Nooraizedfiza | ||
| Vol 12, No 12 (2018) | Increased Hardness, Corrosion Resistant and Corrosion Fatigue Cracking Performance on AISI 304 by DC Sputtering | Abstract |
| Viktor Malau, Bambang Hari Priyambodo, Priyo Tri Iswanto, Tjipto Sujitno, Suprapto Suprapto | ||
| Vol 15, No 3 (2021) | Increasing the Accuracy of a Marine Diesel Engine Operation Limit by Thermal Factor | Abstract |
| Sergii Gorb, Mykola Budurov | ||
| Vol 8, No 1 (2014) | Indentation Fracture Behaviour of Fibre Metal Laminates Based on Kenaf/Epoxy | Abstract |
| M. R. Abdullah, C. L. Pang, N. A. Husain, B. Abdi | ||
| Vol 7, No 7 (2013) | Industrial Lasers for Producing Quality Textile Yarns | Abstract |
| S. Balasubramanian, K. Manonmani | ||
| Vol 9, No 4 (2015) | Industrial Testing Method Hydrodynamic Modeling Apparatus with a Regular Movable Packing | Abstract |
| Zhandos Serikuly, Arailym Dzhumabekkyzy Kaldikulova, Bahytzhan Orazalievich Ospanov, Serik Arginbaevich Kumisbekov | ||
| Vol 7, No 7 (2013) | Influence of Activating Flux and Surface Oxidation on Micro Structure and Mechanical Properties of TIG Welded Stainless Steel Weldments | Abstract |
| M. Gnanasekaran, A. Kumaravel | ||
| Vol 15, No 10 (2021) | Influence of Blending Nanoparticles with Lubricating Oils on the Performance of Rotor Bearings Systems | Abstract |
| Tariq Mohammad Hammza | ||
| Vol 10, No 7 (2016) | Influence of Critical Process Parameters on the Quality of Friction Stir Welded Nylon 6 | Abstract |
| Mohamed Youssif, Mahmoud El-Sayed, Abd El-Fattah Khourshid | ||
| Vol 7, No 6 (2013) | Influence of Cross Sectional Shape on the Heat Transfer Characteristics of Ladder Type Micro Channel Heat Sinks for ULSI | Abstract |
| R. Brinda, R. Joseph Daniel, K. Sumangala | ||
| Vol 15, No 7 (2021) | Influence of Cutting Parameters on the Service Life of Twist HSS Drill Bit When Drilling C35 Steel | Abstract |
| Fouad Afif, Nacer Mokas, Lakhdar Boulanouar | ||
| Vol 12, No 9 (2018) | Influence of Emergency Load on the Residual Strain Value of Torsion ShaftsInfluence of Emergency Load on the Residual Strain Value of Torsion Shafts | Abstract |
| A. K. Andreyev, Julia Andreevna Smirnova, A. F. Igolkin, Svetlana Antoninovna Vologjanina | ||
| Vol 11, No 9 (2017) | Influence of External Heat Transfer by Convection on Time Lag and Decrement Factor of Building Walls | Abstract |
| Zakaria Aketouane, M. Malha, A. Bah, O. Ansari | ||
| 576 - 600 of 1149 Items | << < 19 20 21 22 23 24 25 26 27 28 > >> | |
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize